Cell Adhesion and Migration on Thickness Gradient Bilayer Polymer Brush Surfaces: Effects of Properties of Polymeric Materials of the Underlayer.

In the field of tissue engineering and biomaterials, controlling the surface properties and mechanical properties of scaffold materials is crucial and has attracted much attention. Here, two types of bilayer polymer brushes composed of a hydrophilic underlying layer and a cationic surface layer [made of poly(2-aminoethyl methacrylate)] with a thickness gradient were prepared by surface-initiated atom-transfer radical polymerization. To investigate the influence of the stiffness as a mechanical property of the polymer brush on cell behavior, the underlayer was prepared from either 2-methacryloyloxyethyl phosphorylcholine or oligo(ethylene glycol) methyl ether methacrylate, with the bilayers designated as gradient poly(2-methacryloyloxyethyl phosphorylcholine)-block-poly(2-aminoethyl methacrylate) [grad-pMbA] and gradient poly(oligo[ethylene glycol] methyl ether methacrylate)-block-poly(2-aminoethyl methacrylate) [grad-pEGbA], respectively. Characterization of these surfaces was performed by spectroscopic ellipsometry, X-ray reflectivity, and determination of the zeta potential, static contact angle, and force curve. These diblock copolymer brushes with a thickness gradient helped to distinguish the effects of the mechanical and surface properties of the brushes on cell behavior. The attachment and motility of L929 fibroblasts and epithelial MCF 10A cells on the fabricated brushes were then assessed. L929 cells had a round shape on the thin surface layer of grad-pMbA and spread well on thicker areas. In contrast, MCF 10A cells spread well in areas of any thickness of either grad-pMbA or grad-pEGbA. Single MCF 10A cells migrated randomly on grad-pMbA, whereas grouped cells started to climb up along the thickness gradient of grad-pMbA. In contrast, both single and grouped MCF 10A cells migrated randomly on grad-pEGbA. These thickness gradient diblock copolymer brushes are simple, reproducible, and reasonable platforms that can facilitate practical applications of biomaterials, for example, in tissue engineering and biomaterials.

Evaluation of cadmium in greenhouse soils and agricultural products of Jiroft (Iran) using microwave digestion prior to atomic absorption spectrometry determination.

This study determines total levels of potentially toxic trace element, Cd (II) in Jiroft (Kerman, Iran) greenhouse soil and agricultural products that are grown in these greenhouses (tomatoes and cucumbers), and the comparison with soil outside of greenhouse using microwave digestion prior to flame atomic absorption spectrometry determination. The results show that the cadmium concentration in greenhouse soil is 0.9-1.9 mg kg(-1) and out of greenhouse is 0.4-1.0 mg kg(-1). Also, cadmium concentration range in tomatoes and cucumbers is about 0.07-0.40 mg kg(-1). The obtained results show that the concentration of this metal in greenhouse soil is higher than outside soil samples and is below the safe limit.

Determination of trace amounts of zirconium in real samples after microwave digestion and ternary complex dispersive liquid-liquid microextraction.

In this study, a ternary Zr(IV) system with 2-(5-bromo-2-pyridylazo)-5-diethylaminophenol (5-Br-PADAP) and fluoride was chosen on the basis of dispersive liquid-liquid microextraction method. Zirconium was extracted into the fine droplets of dichlorobenzene as extracting solvent. These drops dispersed as a cloud in the aqueous sample with the help of ultrasonic waves, and the procedure was done. Finally, atomic absorption spectrometry was applied for the determination of zirconium. The effects of different factors that influence complex formation and extraction, such as pH, amounts of complexing agents, type and volume of the extracting solvent, as well as sonication and centrifuging time, were optimized. Under optimum conditions, the calibration curve was linear in the range of 150.0-800.0 ng mL(-1) with a limit of detection of 44.0 ng mL(-1). Relative standard deviation was calculated to be 4.1 % (n = 7, c = 400.0 ng mL(-1)). The enrichment factor was 80. The proposed method was successfully used to determine the zirconium in several water, wastewater, and soil samples.

Determination of trace amounts of Pd(II) ions in water and road dust samples by flame atomic absorption spectrometry after preconcentration on modified organo nanoclay.

This paper describes the application of organo nanoclay, an easily prepared and stable solid sorbent, to the preconcentration of trace amounts of palladium ions in aqueous solution. The organo nanoclay was prepared by adding tetradecyldimethylbenzylamonium chloride onto montmorillonite, which was then modified with 1-(2-pyridylazo)-2-naphthol. The modified nanoclay was used as a solid sorbent for separation and preconcentration of trace amounts of Pd(II) ions, and a simple, sensitive, and economical method was developed for determination of trace amounts of palladium by flame atomic absorption spectrometry. The sorption of Pd(II) ions was quantitative in the pH range of 1.5-5.0, whereas quantitative desorption occurred with 5.0 mL of a mixture containing 1.0 M thiourea and 1.0 M HCl. The RSD of the method was +/- 2.1% (n = 10; concn = 0.5 microg/mL), and the LOD (3sigma(bl); sigma = SD and bl = blank) was 0.1 ng/mL. The calibration curve was linear for concentrations of 0.5-8.0 microg/mL in the initial solution, and the preconcentration factor was 140. The maximum capacity of the sorbent was 2.4 mg Pd(II)/g modified organo nanoclay. The influences of the experimental parameters, including sample pH, eluant volume, eluant type, sample volume, and interfering ions, on the recoveries of the palladium ion were investigated. The proposed method was applied to the preconcentration and determination of palladium in different samples.