Development and in vitro evaluation of donepezil hydrochloride-loaded thermo-responsive polymer grafted molybdenum disulfide nanosheets: Modeling using response surface methodology.

Nanocarriers are utilized to deliver bioactive substances in the treatment of neurodegenerative diseases such as Alzheimer's. In this work, we prepared donepezil hydrochloride-loaded molybdenum disulfide modified thermo-responsive polymer as the thermo-responsive nanocarrier. Then, glycine was grafted to the surface of the polymer to improve the targeting and sustained release. The morphology, crystallinity, chemical bonding, and thermal behavior of nanoadsorbent were fully characterized by field emission scanning electron microscopes, energy dispersive X-ray, X-ray diffraction, Fourier-transform infrared spectroscopy, and thermo-gravimetric measurement. Response surface methodology with the central composite design was applied to optimize the sorption key factors such as pH solution (A: 5-9), contact time (B: 10-30 min), and temperature (C: 30-50 °C). Non-linear isotherm modeling confirmed that the sorption of the drug follows the Ferundlich model based on higher correlation coefficient values (R2 =0.9923) and lower errors values (root means square errors: 0.16 and Chi-square: 0.10), suggesting a heterogeneous multilayer surface sorption. The non-linear sorption kinetic modeling revealed that the pseudo-second-order kinetic model well-fitted the sorption data of the drug on the nanoadsorbent surface based on higher R2 values (R2 =0.9876) and lower errors values (root means square errors: 0.05 and Chi-square: 0.02). The in vitro drug release experiment of donepezil hydrochloride shown that about 99.74 % of drug release was found to be occurred at pH= 7.4 (T = 45 °C) within 6 h, whereas about 66.32 % of drug release occurred at pH= 7.4 (T = 37 °C). The release of donepezil hydrochloride from as prepared drug delivery system has shown a sustained release profile, which was fitted to Korsmeyer-Peppas kinetics.

Temperature-responsive graphene oxide/N-isopropylacrylamide/2-allylphenol nanocomposite for the removal of phenol and 2,4-dichlorophenol from aqueous solution.

In this study, a novel thermo-responsive polymer was synthesized with efficient grafting of N-isopropylacrylamide as a thermosensitive polymer onto the graphene oxide surface for the efficient removal of phenol and 2,4-dichlorophenol from aqueous solutions. The synthesized polymer was conjugated with 2-allylphenol. Phenol and 2,4-dichlorophenol were monitored by ultra-performance liquid chromatography system equipped with a photodiode array detector. The nanoadsorbent was characterized by different techniques. The nanoadsorbent revealed high adsorption capacity where the removal percentages of 91 and 99% were found under optimal conditions for phenol and 2,4-dichlorophenol, respectively (for phenol; adsorbent dosage = 0.005 g, pH = 8, temperature= 25 °C, contact time = 60 min; for 2,4-dichlorophenol; adsorbent dosage = 0.005 g, pH = 5, temperature = 25 °C, contact time = 10 min). Adsorption of phenol and 2,4-dichlorophenol onto nanoadsorbent followed pseudo-second-order kinetic and Langmuir isotherm models, respectively. The values of ΔG (average value = - 11.39 kJ mol-1 for phenol and 13.42 kJ mol-1 for 2,4-dichlorophenol), ΔH (- 431.72 J mol-1 for phenol and - 15,721.8 J mol-1 for 2,4-dichlorophenol), and ΔS (35.39 J mol-1 K-1 for phenol and - 7.40 J mol-1 K-1 for 2,4-dichlorophenol) confirmed spontaneous and exothermic adsorption. The reusability study indicated that the adsorbent can be reused in the wastewater treatment application. Thermosensitive nanoadsorbent could be used as a low-cost and efficient sorbent for phenol and 2,4-dichlorophenol removal from wastewater samples.

Near-infrared light responsive dendrimers facilitate the extraction of bicalutamide from human plasma and urine.

BACKGROUND: Today, it is well accepted that the quantitative measurement of anti-cancer drugs in human biological samples requires the development and validation of efficient bioanalytical methods. This study attempts to provide a high-capacity and thermo-sensitive nano-adsorbent for bicalutamide extraction from human biological fluids. MAIN METHODS AND MAJOR RESULTS: In this study, five generations of thermo-sensitive dendrimers were synthesized onto the surface of WS2 nano-sheets. After drug-loading process from body fluids, the near-infrared (NIR) light (at 808 nm) was applied and light-to-heat conversion by the WS2 nano-sheets led to shrinkage in polymer chains, resulting the release of the entrapped drug. Finally, the extracted drug was analyzed via HPLC-UV system (at 270 nm). The final nano-adsorbent was described via FE-SEM, XRD, FT-IR, and TGA techniques. The adsorption isotherm data were well fitted by Langmuier isotherm model (R2  = 0.9978). The mean recoveries for spiking bicalutamide at three different concentrations in plasma and urine samples were 92.12% and 94.54% under the NIR light irradiation. CONCLUSIONS AND IMPLICATIONS: We have developed a smart strategy to analyze bicalutamide in biological samples using near-infrared light irradiation in a controlled manner. All the results indicate the promising application of the proposed method for the extraction and determination of bicalutamide.

Graft hyper-branched dendrimer onto WS2 nanosheets modified Poly (N-Vinylcaprolactam) as a thermosensitive nanocarrier for Pioglitazone delivery using near-infrared radiation.

In this paper, graft-copolymerization of N-vinylcaprolactam and allylamine onto tungsten disulfide (WS2) in the presence of AIBN as initiator has been carried out to prepare the WS2@ (NVCL-co-AAm). Subsequent fifth-generation dendrimer was attached to their surface, and used as a nanocarrier for the pioglitazone (PG) drug delivery. The resulting polymer was characterized by FTIR, XRD, TEM, EDX, and TGA. We loaded PG onto polymer and evaluated the drug loading and release patterns in simulated human blood fluid (pH 7.4) for the treatment of diabetes in vitro. The thermosensitive nanocarrier indicated a maximum of 98 % PG release in the simulated human blood fluid at 50 °C within 6 h, and about 18 % of total PG was released from the nanocarrier within 6 h at 37 °C. Herein, we studied near-infrared (NIR) radiation as an irritant for inducing PG release from nanocarrier. Also, PG releasing was 100 % under NIR laser irradiation within 15 min, which was roughly four times of that without laser irradiation. NIR laser light heated the nanocarrier, causing shrinkage of the polymer, which increased the penetrability of the membrane and resulted in PG release. Following four adsorption isotherm models, the Langmuir model excellently explained the adsorption isotherm.

Removal of Hg2+ by carboxyl-terminated hyperbranched poly(amidoamine) dendrimers grafted superparamagnetic nanoparticles as an efficient adsorbent.

In this research, carboxyl-terminated hyperbranched poly(amidoamine) dendrimers grafted superparamagnetic nanoparticles (CT-HPMNPs) with core-shell structure were synthesized by the chemical co-precipitation method, the core of superparamagnetic iron oxide nanoparticles and a shell of polyamidoamines (PAMAM) and carboxyl groups, as a novel adsorbent for removing Hg2+ from aqueous systems. The surface of the particles was modified by 3-(aminopropyl) triethoxysilane, and finally, PAMAM and carboxyl dendrimers were grown on the surface up to 5.5 generation. The synthesized polymer was characterized physically and morphologically using different techniques. Also, they were evaluated in terms of adsorption capacity to remove inorganic pollutants of Hg2+, selectivity, and reusability. The adsorption mechanism Hg2+ onto CT-HPMNPs was investigated by single-step and two-step isotherms that the adsorption capacity of Hg2+ obtained 72.3 and 32.88 mg g-1 respectively at pH 5, adsorbent dosage 2 g L-1, Hg2+ initial concentrations 20 mg L-1, contact time 60 min, and temperature of 298 K by CT-HPMNPs. Also, the kinetics of Hg2+ followed the pseudo-second-order model and adsorption isotherms of Hg2+ onto CT-HPMNPs were fitted well by Freundlich (as a single-step) and two-step adsorption models with a correlation coefficient of 0.9997 and 0.9999 respectively. The results showed a significant potential of Hg2+ ions removing from industrial wastewater and spiked water by CT-HPMNPs.

Thermosensitive molecularly imprinted poly(1-vinyl-2-pyrrolidone/methyl methacrylate/N-vinylcaprolactam) for selective extraction of imatinib mesylate in human biological fluid.

The efficiency of a molecularly imprinted polymer as a selective packing material for the solid-phase extraction of imatinib mesylate sorption was investigated. The molecularly imprinted polymer was prepared using N,N'-methylenebisacrylamide as a cross-linker agent, N-vinylcaprolactam as a thermo-sensitive monomer, 1-vinyl-2-pyrrolidone and methyl methacrylate as functional monomers, azobisisobutyronitrile as an initiator and imatinib mesylate as a template. The drug-imprinted polymer was identified by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and scanning electron microscopy. It was found that this polymer can be used for determination of trace levels of imatinib mesylate with a recovery percentage that could reach over 90%. Furthermore, the synthesized molecularly imprinted polymer indicated higher selectivity towards imatinib mesylate than other compounds. From isotherm study, the equilibrium adsorption data of imatinib mesylate by imprinted polymer were analyzed by Langmuir, Freundlich, and Temkin isotherm models. The developed method was used for determination of imatinib mesylate in human fluid samples by high performance liquid chromatography with excellent results.

Ultrasensitive separation of methylprednisolone acetate using a photoresponsive molecularly imprinted polymer incorporated polyester dendrimer based on magnetic nanoparticles.

We developed an approach for the use of polyester dendrimer during the imprinting process to raise the number of recognized sites in the polymer matrix and improve its identification ability. Photoresponsive molecularly imprinted polymers were synthesized on modified magnetic nanoparticles involving polyester dendrimer which uses the reactivity between allyl glycidyl ether and acrylic acid for the high-yielding assembly by surface polymerization. The photoresponsive molecularly imprinted polymers were constructed using methylprednisoloneacetate as the template, water-soluble azobenzene involving 5-[(4, 3-(methacryloyloxy) phenyl) diazenyl] dihydroxy aniline as the novel functional monomer, and ethylene glycol dimethacrylate as the cross-linker. Through the evaluation of a series of features of spectroscopic and nano-structural, this sorbent showed excellent selective adsorption, recognition for the template, and provided a highly selective and sensitive strategy for determining the methylprednisoloneacetate in real and pharmaceutical samples. In addition, this sorbent according to good photo-responsive features and specific affinity to methylprednisoloneacetate with high recognition ability, represented higher binding capacity, a more extensive specific area, and faster mass transfer rate than its corresponding surface molecularly imprinted polymer.

Stabilizing of poly(amidoamine) dendrimer on the surface of sand for the removal of nonylphenol from water: Batch and column studies.

In this work, a novel adsorbent with stabilizing of PAMAM dendrimer on the surface of sand was successfully synthesized and used to remove NP from water. The characterization of the adsorbent was performed by XRD, FTIR, TEM, and FE-SEM. Batch and column studies were conducted to evaluate the performance of the adsorbent. It was found that Freundlich isotherm and pseudo-second order models are perfectly stimulated the adsorption behavior and kinetic rate of NP uptake. In column study, first the effect of bed depth, flow rate and initial concentration of NP on the performance of the adsorbent were evaluated then the breakthrough curve for each condition was drawn. Finally, Thomas model constants to describe NP adsorption were calculated. As the result of the experiments, it might be concluded that in conventional water treatment plants which the removal of NP is negligible, the use of synthesized adsorbent as a filter media can be a promising way to selectively remove NP from water.

Providing hyper-branched dendrimer conjugated with ß-cyclodextrin based on magnetic nanoparticles for the separation of methylprednisolone acetate.

This study introduced a developed approach for dendritic ß-cyclodextrin (ß-CD) in order to obtain high sorption capacity. Synthetic strategy exploits the reactivity between acrylic acid and allyl glycidyl ether for high-yielding assembly via grafting on to the magnetic nanoparticles that are modified using 3-mercaptopropyltrimethoxysilane for various building branches and host-guest molecules of ß-CD. The methodology has been applied for the preparation of a series of ß-CD conjugated magnetic nanoparticles with dendrimers as a nano-sorbent for the extraction of methylprednisolone acetate. This study allowed us to probe (i) the effects of the dendric-cyclodextrin architecture on the affinity of sorption capacity, (ii) the drug influence between the cyclodextrin core and the polyester dendrimer, and (iii) the result of sorbent formation for using the anti-inflammatory drug as a target guest into the ring of ß-CD on biological extraction. It was found that the adsorption behavior could be fitted by the Langmuir adsorption isotherm model. The adsorption capacity of MPA is found to be 12.4 mg g-1 and indicated the homogeneous sites onto polymer grafted magnetite nano-sorbent surface. Our results confirm the high capability of this type of dendrimer-ß-CD for drug extraction in biological fluids and pharmaceutical samples. This nano-sorbent assists the magnetic solid phase extraction technique represented in the high extraction yield (up to 97%) for methylprednisolone acetate in biological human fluids and pharmaceutical samples. Moreover, the achieved polymeric nano-sorbent of the reaction combination was facilitated by a magnetic field and reusability was performed without any notable loss in the sorbent activity.

Functionalized superparamagnetic nanoparticles with a polymer containing ß-cyclodextrin for the extraction of sertraline hydrochloride in biological samples.

In this study, a novel magnetic nanoadsorbent was synthesized by grafting ß-cyclodextrin onto the modified surface of Fe3 O4 nanoparticles for the sorption and extraction of sertraline hydrochloride from human biological fluids. The extracted sertraline hydrochloride was measured by high-performance liquid chromatography. The grafted nanosorbent was confirmed by Fourier transform infrared spectroscopy, transmission electron microscopy, thermogravimetric analysis, and elemental analysis. The kinetic sorption of sertraline hydrochloride by magnetic nanosorbent was 1 h. The best temperature for sorption of sertraline hydrochloride was at 25°C at an optimum pH of 5. The adsorbed sertraline hydrochloride can be desorbed by using methanol solution containing acetic acid (5%) and trifluoroacetic acid (1%).

Magnetic iron oxide nanoparticles grafted N-isopropylacrylamide/chitosan copolymer for the extraction and determination of letrozole in human biological samples.

Magnetic iron oxide nanoparticles are used for the extraction of a drug from an aqueous solution. In the current study, the magnetic iron oxide nanoparticles were synthesized via a facile coprecipitation approach, and then modified by (3-mercaptopropyl)trimethoxysilane followed by grafting thermosensitive polymer N-isopropylacrylamide and biopolymer chitosan. Structure, morphology, size, thermal resistance, specific surface area, and magnetic properties of the grafted nanosorbent were characterized by using Fourier transform infrared spectroscopy, field emission scanning electron microscopy, transmission electron microscopy, elemental analysis, thermogravimetric analysis, specific surface area analysis and vibrating sample magnetometry. The effective parameters on sorption/desorption of letrozole on grafted magnetic nanosorbent were evaluated. The best sorption of letrozole via the grafted nanosorbent occurred at 20°C at an optimum pH of 7. The extraction of trace letrozole in human biological fluids is investigated and revealed 89.1 and 97.8% recovery in plasma and urine, respectively.

Grafting of allylimidazole and n-vinylcaprolactam as a thermosensitive polymer onto magnetic nano-particles for the extraction and determination of celecoxib in biological samples.

In this research, a novel method is reported for the surface grafting of n-vinylcaprolactam as a thermosensitive agent and allylimidazole with affinity toward celecoxib onto magnetic nano-particles. The grafted nano-particles were characterized by Fourier transform infrared spectroscopy, elemental analysis, and thermogravimetric analysis. The surface morphology was studied using Scanning Electron Microscopy. The resulting grafted nano-particles were used for the determination of trace celecoxib in biological human fluids and pharmaceutical samples. The profile of celecoxib uptake by the modified magnetic nano-particles indicated good accessibility of the active sites in the grafted copolymer. It was found that the adsorption behavior could be fitted by the Langmuir adsorption isotherm model. Solid phase extraction for biological fluids such as urine and serum were investigated. In this study, urine extraction recovery of more than 95% was obtained.

Fabrication of magnetite nano particles and modification with metal organic framework of Zn(2+) for sorption of doxycyline.

This study presents a novel method for synthesis and characterization of a metal-organic framework and application in drug delivery. The first step was synthesis of amino functionalized magnetite that was then modified by a metal-organic framework of Zn(2+). This newly developed nano-sorbent was characterized by Fourier transform infrared spectroscopy, scanning electron microscopy, energy dispersive x-ray spectroscopy, thermogravimetric analysis, vibrating sample magnetometer and x-ray diffraction. Doxycycline was loaded to the nano-sorbent and effects of the variable parameters, kinetics of adsorption, release and capacity of adsorption were investigated. Test results specified maximum sorption of 21.5mgg(-1) for doxycycline in conditions of nano-sorbent at pH 7 and optimum time of 10min. Equilibrium adsorption data were analyzed by the Langmuir, Freundlich and Temkin models. Results showed that about 40% of doxycycline was released in simulated gastric fluid for the 30min and more than 70% was released in simulated intestinal fluid during 12h. These results were satisfactory and demonstrate that this new nano-sorbent modified with metal-organic framework had a good level of efficiency for drug delivery of doxycycline.

Synthesis of thermosensitive magnetic nanocarrier for controlled sorafenib delivery.

Allyl glycidyl ether/N-isopropylacrylamide-grafted magnetic nanoparticles were prepared using silica-coated magnetic nanoparticles as a substrate for radical copolymerization of allyl glycidyl ether and N-isopropylacrylamide. Chitosan was coupled with the prepared nanoparticles by opening the epoxy ring of the allyl glycidyl ether. The thermosensitive magnetic nanocarrier (TSMNC) obtained can be applied as a potent drug carrier. The TSMNC structure was characterized using Fourier transform infrared spectroscopy, X-ray diffraction, thermogravimetric analysis, differential scanning calorimetry, vibrating sample magnetometer, and elemental analysis. Its morphology and size were investigated using field emission scanning electron microscopy, transmission electron microscopy and dynamic light scattering. The feasibility of employing the TSMNC for adsorption and in vitro controlled release of the chemotherapeutic agent sorafenib was tested. The effect of the adsorption parameters of pH, temperature, and loading time of sorafenib onto TSMNC was evaluated. The adsorption data was fitted to the Langmuir and Freundlich isotherms and the relevant parameters derived. The drug release profile indicated that 88% of the adsorbed drug was released within 35h at 45°C and drug release was Fickian diffusion-controlled. The results confirmed that the TSMNC has a high adsorption capacity at low temperature and good controlled release in a slow rate at a high temperature and could be developed for further application as a drug nanocarrier.

Two-phase and three-phase liquid-phase microextraction of hydrochlorothiazide and triamterene in urine samples.

This paper reports the applicability of two-phase and three-phase hollow fiber based liquid-phase microextraction (HF-LPME) for the extraction of hydrochlorothiazide (HYD) and triamterene (TRM) from human urine. The HYD in two-phase HF-LPME is extracted from 24 mL of the aqueous sample into an organic phase with microliter volume located inside the pores and lumen of a polypropylene hollow fiber as acceptor phase, but the TRM in three-phase HF-LPME is extracted from aqueous donor phase to organic phase and then back-extracted to the aqueous acceptor phase, which can be directly injected into HPLC for analysis. Under optimized conditions preconcentration factors of HYD and TRM were obtained as 128 and 239, respectively. The calibration curves were linear (R(2) ≥ 0.995) in the concentration range of 1.0-100 µg/L for HYD and 2.0-100 µg/L for TRM. The limits of detection for HYD and TRM were 0.5 µg/L. The intra-day and inter-day RSD based on four replicates were obtained as ≤5.8 and ≤9.3%, respectively. The methods were successfully applied for determining the concentration of the drugs in urine samples. Copyright © 2015 John Wiley & Sons, Ltd.

Polymer brushes containing thermosensitive and functional groups grafted onto magnetic nano-particles for interaction and extraction of famotidine in biological samples.

This study introduces a new method for grafting poly[N-isopropylacrylamide-co-allyl glycidyl/iminodiacetic] onto iron oxide nano-particles modified using 3-mercaptopropyltrimethoxysilane. The grafted nano-polymer was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, transmission electron microscopy and scanning electron microscopy. The parameters of pH, contact time and temperature of the grafted nano-polymer were investigated. The determination and extraction of famotidine in human biological fluids was evaluated for high accessibility to active sites on the grafted sorbent. The equilibrium adsorption data were analyzed using the Langmuir and Freundlich models. The sorption capacity of the nano-sorbent was 116 mg g(-1) at an optimum pH of 7. About 73% of famotidine was released into simulated gastric fluid by 1 h and 70% was released into simulated intestinal fluids by 30 h at 37 °C. These results show that this new magnetic grafted nano-polymer is suitable for enteric drug delivery.

ß-Cyclodextrin/thermosensitive containing polymer brushes grafted onto magnetite nano-particles for extraction and determination of venlafaxine in biological and pharmaceutical samples.

In this paper, a novel nano-sorbent is fabricated by the surface grafting of poly[ß-CD/allylamine-co-N-isopropylacrylamide] onto modified magnetite nano-particles by 3-mercaptopropyltrimethoxysilane. The polymer grafted magnetite nano-particles was characterized by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, scanning electron microscopy, and transmission electron microscopy. The feasibility of employing this nano-sorbent for extraction of trace venlafaxine in pharmaceutical samples and human biological fluids are investigated. The effect of various parameters such as pH, reaction temperature, and contact time was evaluated. The result revealed that the best sorption of venlafaxine by the magnetite nano-sorbent occurred at 35 °C at an optimum pH of 5. The kinetics of the venlafaxine shows accessibility of active sites in the grafted polymer onto the drug. The equilibrium data of venlafaxine by grafted magnetite nano-sorbent are well represented by the Langmuir and Freundlich isotherm models. The adsorption capacity of venlafaxine is found 142.8 mg g(-1) and indicated the homogeneous sites onto polymer grafted magnetite nano-sorbent surface. Nearly 80% of venlafaxine was released in simulated intestinal fluid, pH 7.4, in 30 h and 90% in simulated gastric fluid, pH 1.2, in 1 h. The venlafaxine loaded-polymer grafted magnetite nano-particles were successfully applied for the extraction in urine and pharmaceutical samples.

Synthesis and characterization of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] grafted to magnetic nano-particles for extraction and determination of letrozole in biological and pharmaceutical samples.

In this paper, a new method is reported for the surface grafting of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] onto magnetic nano-particles modified by 3-mercaptopropyltrimethoxysilane. The grafted nano-sorbent was characterized by Fourier transform infrared spectroscopy, elemental analysis, thermogravimetric analysis, and scanning electron microscopy. Agglomerated nano-particles with multi-pores were used for extraction and determination of trace letrozole in human biological fluids and pharmaceutical samples. The profile of the letrozole uptake by the magnetic nano-sorbent reflected good accessibility of the active sites in the grafted polymer. Scatchard analysis revealed that the sorption capacity of the functionalized nano-sorbent was 6.27 µmol g(-1) at an optimum pH of 4. The equilibrium adsorption data of letrozole by grafted magnetic nano-sorbent were analyzed by Langmuir, Freundlich, Temkin and Redlich-Peterson models. Conformation of the experimental data in the Langmuir isotherm model indicated the homogeneous binding site of functional polymer-grafted magnetic nano-sorbent surface. Nearly 89% of letrozole was released in simulated gastric fluid, pH 1.2, in 2h and 79% in simulated intestinal fluid, pH 7.4, in 30 h. These results show the utility of the letrozole loaded- polymer grafted magnetite nano-particles for enteric drug delivery.

Grafting of poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] copolymer onto siliceous support for preconcentration and determination of lead (II) in human plasma and environmental samples.

A method is reported for surface grafting of polymer containing a functional monomer for metal chelating, poly[1-(N,N-bis-carboxymethyl)amino-3-allylglycerol-co-dimethylacrylamide] (poly(AGE/IDA-co-DMAA) onto silica modified by silylation with 3-mercaptopropyltrimethoxysilane. Monomer 1-(N,N-bis-carboxymethyl)amino-3-allylglycerol (AGE/IDA) was synthesized by reaction of allyl glycidyl ether with iminodiacetic acid. The resulting sorbent has been characterized using FT-IR, elemental analysis, thermogravimetric analysis (TGA), FT-Raman and scanning electron microscopy (SEM) and evaluated for the preconcentration and determination of trace Pb(II) in human biological fluid and environmental water samples. The optimum pH value for sorption of the metal ion was 5.5. The sorption capacity of functionalized resin was 15.06 mg g(-1). The chelating sorbent can be reused for 15 cycles of sorption-desorption without any significant change in sorption capacity. A recovery of 96.2% was obtained for the metal ion with 0.5 M nitric acid as eluting agent. The profile of lead uptake by the sorbent reflects good accessibility of the chelating sites in the poly(AGE/IDA-co-DMAA)-grafted silica gel. Scatchard analysis revealed that the homogeneous binding sites were formed in the polymers. The equilibrium adsorption data of Pb(II) by modified resin were analyzed by Langmuir, Freundlich, Temkin and Redlich-Peterson models. On the basis of equilibrium adsorption data the Langmuir, Freundlich and Temkin constants were determined as 0.70, 1.35 and 2.7, respectively at pH 5.5 and 20 degrees C. Isotherms have also been used to obtain the thermodynamic parameters such as free energy, enthalpy and entropy of adsorption.