A bibliometric analysis of the research outcome of the Faculty of Medicine, University of Khartoum 2019-2023.

Using two databases, this bibliometric analysis was done for the papers published by the Faculty of Medicine, University of Khartoum (FMUK), from 2019 to 2023. Data were extracted from SCImago for all Sudan, and from PubMed for the publications by FMUK and its associated research centres, the Institute of Endemic Diseases, and the Mycetoma Research Center. The analysis of publications included the count and type of publications, the journals, and national and international collaboration assessment. The publications from FMUK show improvement over time in number and quality, a growth that is significantly influenced by national and international collaboration. These partnerships have proven to be a key driver of FMUK's research output, together with the valuable contributions of the specialized research institutions. However, there is room for improvement in the research output by increasing institutional capacity to support research and scientific communication. The Sudanese Journal of Paediatrics is an example where open access has a positive impact by allowing peripheral journals to be established despite the constraints.

Correction: The role of PMA in enhancing the surface acidity and catalytic activity of a bimetallic Cr-Mg-MOF and its applications for synthesis of coumarin and dihydropyrimidinone derivatives.

[This corrects the article DOI: 10.1039/D0RA03591B.].

A comparative study of α-Ni(OH)2 and Ni nanoparticle supported ZIF-8@reduced graphene oxide-derived nitrogen doped carbon for electrocatalytic ethanol oxidation.

Ethanol electrooxidation is an important reaction for fuel cells, however, the major obstacle to ethanol electrocatalysis is the splitting of the carbon-carbon bond to CO2 at lower overpotentials. Herein, a ZIF-8@graphene oxide-derived highly porous nitrogen-doped carbonaceous platform containing zinc oxide was attained for supporting a non-precious Ni-based catalyst. The support was doped with the disordered α-phase Ni(OH)2 NPs and Ni NPs that are converted to Ni(OH)2 through potential cycling in alkaline media. The Ni-based catalysts exhibit high electroactivity owing to the formation of the NiOOH species which has more unpaired d electrons that can bond with the adsorbed species. From CV curves, the EOR onset potential of the α-Ni(OH)2/ZNC@rGO electrode is strongly shifted to negative potential (Eonset = 0.34 V) with a high current density of 8.3 mA cm-2 relative to Ni/ZNC@rGO. The high catalytic activity is related to the large interlayer spacing of α-Ni(OH)2 which facilitates the ion-solvent intercalation. Besides, the porous structure of the NC and the high conductivity of rGO facilitate the kinetic transport of the reactants and electrons. Finally, the catalyst displays a high stability of 92% after 900 cycles relative to the Ni/ZNC@rGO and commercial Pt/C catalysts. Hence, the fabricated α-Ni(OH)2/ZNC@rGO catalyst could be regarded as a potential catalyst for direct EOR in fuel cells.

Selective Reduction of Multivariate Metal-Organic Frameworks for Advanced Electrocatalytic Cathodes in High Areal Capacity and Long-Life Lithium-Sulfur Batteries.

Lithium-sulfur batteries hold great promise as next-generation high-energy-density batteries. However, their performance has been limited by the low cycling stability and sulfur utilization. Herein, we demonstrate that a selective reduction of the multivariate metal-organic framework, MTV-MOF-74 (Co, Ni, Fe), transforms the framework into a porous carbon decorated with bimetallic CoNi alloy and Fe3O4 nanoparticles capable of entrapping soluble lithium polysulfides while synergistically facilitating their rapid conversion into Li2S. Electrochemical studies on coin cells containing 89 wt % sulfur loading revealed a reversible capacity of 1439.8 mA h g-1 at 0.05 C and prolonged cycling stability for 1000 cycles at 1 C/1060.2 mA h g-1 with a decay rate of 0.018% per cycle. At a high areal sulfur loading of 6.9 mg cm-2 and lean electrolyte/sulfur ratio (4.5 µL:1.0 mg), the battery based on the 89S@CoNiFe3O4/PC cathode provides a high areal capacity of 6.7 mA h cm-2. The battery exhibits an outstanding power density of 849 W kg-1 at 5 C and delivers a specific energy of 216 W h kg-1 at 2 C, corresponding to a specific power of 433 W kg-1. Density functional theory shows that the observed results are due to the strong interaction between the CoNi alloy and Fe3O4, facilitated by charge transfer between the polysulfides and the substrate.

Prophylactic common iliac artery temporary clamping versus balloon occlusion for management of placenta accreta spectrum disorders: A prospective clinical trial.

OBJECTIVE: The present study aims to compare prophylactic common iliac artery (CIA) temporary clamping and preoperative balloon occlusion for managing placenta accreta spectrum (PAS) disorders. STUDY DESIGN: Between January 2019 and June 2020, 46 patients with PAS disorders were included. Of them, 26 patients were offered CIA balloon occlusion (Group A), while temporary CIA clamping was done for the other 20 patients (Group B). Primary outcomes were procedure-related complications, and secondary outcomes included intraoperative and postoperative complications, reoperation rates, total procedure time, blood loss, and amount of blood transfusion. RESULTS: Blood loss was statistically non-significant higher in group B than in group A (p-value = 0.143). Only one patient in group A and three in group B needed reoperation. The bleeding continued for a mean of 1.6 days in group A and 1.7 days in group B, with non-significant statistical differences between both groups p value = 0.71. Nine patients in group A (34.6%) and four in group B (20%) required ICU admission. The mean Apgar score was 7 and 6.6 in babies of group A and group B patients, respectively. The median number of allogeneic blood transfusions performed was two in patients in group A and 1 in group B (p-value = 0.001). CONCLUSION: Both techniques offer good choices for patients with PAS to decrease mortality and morbidity rates. The selection of a better technique depends on institutional references and physicians' experience.

Construction of thickness-controllable bimetallic sulfides/reduced graphene oxide as a binder-free positive electrode for hybrid supercapacitors.

Devices for electrochemical energy storage with exceptional capacitance and rate performance, outstanding energy density, simple fabrication, long-term stability, and remarkable reversibility have always been in high demand. Herein, a high-performance binder-free electrode (3D NiCuS/rGO) was fabricated as a supercapacitor by a simple electrodeposition process on a Ni foam (NF) surface. The thickness of the deposited materials on the NF surface was adjusted by applying a low cycle number of cyclic voltammetry (5 cycles) which produced a thin layer and thus enabled the easier penetration of electrolytes to promote electron and charge transfer. The NiCuS was anchored by graphene layers producing nicely integrated materials leading to a higher electroconductivity and a larger surface area electrode. The as-fabricated electrode displayed a high specific capacitance (2211.029 F g-1 at 5 mV s-1). The NiCuS/rGO/NF//active carbon device can achieve a stable voltage window of 1.5 V with a highly specific capacitance of 84.3 F g-1 at a current density of 1 A g-1. At a power density of 749 W kg-1, a satisfactory energy density of 26.3 W h kg-1 was achieved, with outstanding coulombic efficiency of 100% and an admirable life span of 96.2% after 10 000 GCD cycles suggesting the significant potential of the as-prepared materials for practical supercapacitors.

Synthesis of Highly Efficient and Recyclable Bimetallic Cox-Fe1-x-MOF for the Synthesis of Xanthan and Removal of Toxic Pb2+ and Cd2+ Ions.

Mono-(Fe) and bimetallic Cox-Fe1-x-MOF with different Co and Fe contents was successfully synthesized by the solvothermal method. The structural properties of the prepared samples were characterized by X-ray diffraction, transmission electron microscopy (TEM), Brunauer-Emmett-Teller specific surface area, and Fourier transform infrared spectroscopy. The results revealed the successful formation of mono and mixed Cox-Fe1-x-MOF. Also, the results of TEM displayed that the particle structure of Cox-Fe1-x-MOF changed to octahedral after the addition of cobalt. The surface acidity results illustrated that the samples showed both Lewis and Brønsted acid sites, and Cox-Fe1-x-MOF possessed more surface acidity than Fe-MOF. The catalytic performance of the prepared samples was tested by synthesis of 14-phenyl-14H-dibenzo [a, j] xanthene (xanthene), and bimetallic Cox-Fe1-x-MOF showed higher activity compared to monometallic Fe-MOF. The sample with Co0.50-Fe0.50-MOF gave the highest yield of xanthene with 90.2%. In addition, the prepared samples were used for removal of Pb2+ and Cd2+ ions from the aqueous solution. The sample with Co0.50-Fe0.50-MOF showed the highest removal efficiency compared with mono- and other bimetallic samples. The results illustrated that the addition of Co to Fe enhanced the structural properties, acidity, and catalytic performance of the prepared samples due to the synergistic effect between Fe and Co ions. According to the obtained results, the prepared samples showed great potentials for the synthesis of pharmacologically active compounds and environmental protection.

Solar-driven seawater desalination via plasmonic hybrid MOF/polymer and its antibacterial activity.

In recent years, solar seawater desalination has been considered to be a promising and cost-effective technique to produce clean sources for water treatment and water deficiency. In addition, this technique shows high photothermal conversion efficiency by solar collectors to transfer solar energy into heat and the transformation of molecules in the capillaries of solar evaporators. In this study, we report the preparation of graphene-supported MIL-125 with polyurethane foam (MGPU) for solar steam generation. We modified MGPU by using the plasmonic nanoparticles of Ag and a polymer of polyaniline to increase the evaporation rate. Polyurethane foam can float on the surface of water and self-pump water by its hydrophilic porous structure, superior thermal insulation capabilities, and easy fabrication. MIL-125 has a high salt rejection and higher water permeability. It can reduce the affinity between water molecules and the pore surface of membrane, making it simple for water molecules to move through the pores. GO is a great alternative for steam generation applications since it exhibits broad-band light. The strong solar absorption, photothermal conversion efficiency, and photoreaction efficiency are enhanced by the use of silver nanoparticles in the photoreaction. The salt resistance capability is enhanced in saline water in the presence of polyaniline in a composite. Under one solar irradiation, the Ag/PANI/GO@MIL-125 (Ag-PMG) nanocomposite demonstrates an average 1.26 kg m2 h-1 rate of evaporation and an efficiency as high as 90%. The composite exhibits remarkable stability and durability after more than 10 cycles of use without a noticeable decrease in activity. In addition, the composite exhibits excellent organic dye removal from contaminated water and generates pure condensed freshwater. The antibacterial photoactivity of the photocatalysts was examined against B. subtilis and E. coli. The results demonstrate that Ag-PMG shows higher antibacterial activity than MIL-125 and PMG. It was shown that the presence of rGO, PANI, and Ag in the sample enhances the antimicrobial activity.

The Possible Effects of Vitamin D3 on AlCl3-Induced Histological and Morphometric Alterations of Adult Male Albino Rat Hippocampus.

Context: Alzheimer's disease (AD) is a challenging neurodegenerative disease, and Vitamin D was proved to have neuroprotective effects. Aim: This study was conducted to evaluate the potential neuroprotective effects of Vitamin D3 supplementation on AlCl3-induced AD rat model in different hippocampal subregions (CA1, CA2, and CA3). It also aimed to compare the protective effects of protective versus therapeutic effects of Vitamin D3 regiments on the number of degenerated neurons and the neuronal layer thickness. Materials and Methods: Twenty-four adult male Albino Wister rats were sorted into GI: control; GII: AlCl3-AD model (100 mg/kg) orally for 42 days; GIII: Rats were co-treated with AlCl3 (as GII) and Vitamin D3 (400 IU/kg/day) orally for 42 days; GIV: Rats were treated with AlCl3 for 42 days then with Vitamin D3 for further 2 weeks. Sagittal sections (5 µ) from paraffin-processed brains previously fixed in 10% neutral-buffered formalin were stained with hematoxylin and eosin to evaluate the thickness and number of degenerated neurons in the hippocampal CA1, CA2, and CA3 subregions. Statistical Analysis: The results of this study were expressed as mean ± standard deviation and analyzed by using IBM SPSS Statistics for Windows, version 23 (IBM SPSS, IBM Corp., Armonk, N.Y., USA). P < 0.05 was considered statistically significant. Results: Vitamin D3 supplementations modulated the degenerative changes observed in the hippocampus of AD rat model. In all hippocampal subregions, the thickness was higher in rats treated with Vitamin D3 after the AD induction than rats treated with Vitamin D3 during AD induction. However, this increase was only significant in CA2. Comparison of the number of degenerated neurons between both groups treated with Vitamin D3 revealed that in CA1, the number of degenerated neurons did not statistically differ between the two groups. However, it was insignificantly lower in CA2 in rats treated with Vitamin D3 after the AD induction, and in CA3, it was insignificantly lower in rats treated with Vitamin D3 during the AD induction. Conclusions: Vitamin D3 was found to be effective in ameliorating histological and morphometric alterations in AlCl3-induced AD in rat model and could be proposed as both preventive and therapeutic supplements in high-risk AD patients.

Cesium salt of tungstophosphoric acid/mesoporous (zirconia-silica) composite for highly efficient synthesis of 7-hydroxy-4-methyl coumarin and removal of methylene blue.

The removal of harmful organic dyes from aqueous solutions has drawn the attention of scientists because of the substantial threat they pose to society's worldwide health. Hence, it is crucial to design an adsorbent that is both very effective in removing dyes and has the benefit of being inexpensive. In the present work, Cs salts of tungstophosphoric acid (CPW) supported mesoporous Zr-mSiO2 (mZS) with varying extents of Cs ions have been prepared by a two-step impregnation technique. Accordingly, a lowering in the surface acidity modes was observed after Cs exchanged protons of H3W12O40 and formed salts immobilized on the mZS support. After exchanging the protons with Cs ions, the characterization results revealed that the primary Keggin structure was unaltered. Moreover, the Cs exchanged catalysts had higher surface area than the parent H3W12O40/mZS, suggesting that Cs reacts with H3W12O40 molecules to create new primary particles with smaller sizes possessing inter-crystallite centers with a higher dispersion degree. With an increase in Cs content and thus a decrease in the acid strength and surface acid density, the methylene blue (MB) monolayer adsorption capacities on CPW/mZS catalysts were increased and reached an uptake capacity of 359.9 mg g-1 for Cs3PW12O40/mZS (3.0CPW/mZS). The catalytic formation of 7-hydroxy-4-methyl coumarin was also studied at optimum conditions and it is found that the catalytic activity is influenced by the amount of exchangeable Cs with PW on the mZrS support, which is in turn influenced by the catalyst acidity. The catalyst kept approximately the initial catalytic activity even after the fifth cycle.

AOEHO: A New Hybrid Data Replication Method in Fog Computing for IoT Application.

Recently, the concept of the internet of things and its services has emerged with cloud computing. Cloud computing is a modern technology for dealing with big data to perform specified operations. The cloud addresses the problem of selecting and placing iterations across nodes in fog computing. Previous studies focused on original swarm intelligent and mathematical models; thus, we proposed a novel hybrid method based on two modern metaheuristic algorithms. This paper combined the Aquila Optimizer (AO) algorithm with the elephant herding optimization (EHO) for solving dynamic data replication problems in the fog computing environment. In the proposed method, we present a set of objectives that determine data transmission paths, choose the least cost path, reduce network bottlenecks, bandwidth, balance, and speed data transfer rates between nodes in cloud computing. A hybrid method, AOEHO, addresses the optimal and least expensive path, determines the best replication via cloud computing, and determines optimal nodes to select and place data replication near users. Moreover, we developed a multi-objective optimization based on the proposed AOEHO to decrease the bandwidth and enhance load balancing and cloud throughput. The proposed method is evaluated based on data replication using seven criteria. These criteria are data replication access, distance, costs, availability, SBER, popularity, and the Floyd algorithm. The experimental results show the superiority of the proposed AOEHO strategy performance over other algorithms, such as bandwidth, distance, load balancing, data transmission, and least cost path.

In vitro assessment of antiprotozoal and antimicrobial activities of fractions and isolated compounds from Pallenis hierochuntica.

The antiprotozoal and antimicrobial properties of the extract and fractions of the whole plant of Pallenis hierochuntica were investigated against a panel of pathogenic organisms. Fractionation of the methanol extract of the whole plant of Pallenis hierochuntica using reverse-phase chromatography gave 28 fractions and led to the isolation of 2 new bisabolone hydroperoxides, 6,10 ß,11-trihydroxy-bisabol-2-ene-1-one (1a), 6,10 α,11-trihydroxy-bisabol-2-ene-1-one (1b) and also 6,10 ß-dihydroxy-bisabol-2,11-diene-1-one (2). They were characterised by extensive spectrometric analysis. Anti-infective investigations of the fractions revealed that 22 to 26 possessed significant antimalarial activity against the D6 and W2 strains of Plasmodium falciparum with IC50 = 7.62 - 9.91 µg/mL and 5.49 - 6.08 µg/mL, respectively, and SI>6.0 on average. Fractions 7, 16 to 24 exhibited good activity against Leishmania donovani promastigotes (IC50 = 6.71 - 18.77 µg/mL). Fractions 25 to 28 were active against T. brucei trypomastigotes, 25 being the most potent (IC50 = 4.13 µg/mL). Only 11 to 13 were active against Aspergillus fumigatus (IC50 = 13.406 µg/mL). 1a and 2 were not promising against the organisms tested. 1a and 1b were characterised for the first time.

Silver sulfide decorated carbonaceous sawdust/ES-PANI composites as salt-resistant solar steam generator.

Solar steam generation (SSG) is a potential approach for resolving the global water and energy crisis while causing the least amount of environmental damage. However, using adaptable photothermal absorbers with salt resistance through a simple, scalable, and cost-effective production approach is difficult. Herein, taking advantage of the ultra-fast water transportation in capillaries, and the large seawater storage capacity of wood, we develop a highly efficient natural evaporator. The wood wastes (sawdust) were carbonized at low temperatures to fabricate a green and low-cost carbonaceous porous material (CW). To enhance the salt resistance in high saline water, this evaporator was coated with polyaniline emeraldine salt (ES-PANI) which was synthesized through facile and cost-effective one-step oxidation of aniline. Furthermore, the composite was decorated with silver sulfide to increase the evaporation rate which reached up to 1.1 kg m-2 h-1 under 1 sun irradiation with 91.5% efficiency. Besides, the evaporator performs exceptionally well over 10 cycles due to the salt resistance capability of ES-PANI which generates a "Donnan exclusion" effect against cations in saline water. The Ag2S@PANI/CW evaporator may be a viable large-scale generator of drinking water due to its high efficiency for energy conversion, simple and low-cost fabrication approach, salt-resistance, and durability.

Fe/Co-MOF Nanocatalysts: Greener Chemistry Approach for the Removal of Toxic Metals and Catalytic Applications.

This study describes the preparation of new bimetallic (Fe/Co)-organic framework (Bi-MOF) nanocatalysts with different percentages of iron/cobalt for their use and reuse in adsorption, antibacterial, antioxidant, and catalytic applications following the principles of green chemistry. The prepared catalysts were characterized using several techniques, including X-ray powder diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, and scanning electron microscopy. These techniques proved the formation of MOFs, and the average crystallite sizes were 25.3-53.1, 27.6-67.2, 3.0-18.9, 3.0-12.9, and 3.0-23.6 nm for the Fe-MOF, Co-MOF, 10%Fe:90%Co-MOF, 50%Fe:50%Co-MOF, and 90%Fe:10%Co-MOF samples, respectively. The nanoscale (Fe/Co) Bi-MOF catalysts as efficient heterogeneous solid catalysts showed high catalytic activity with excellent yields and short reaction times in the catalytic reactions of quinoxaline and dibenzoxanthene compounds, in addition to their antioxidant and antibacterial activities. Furthermore, the nanoscale (Fe/Co) Bi-MOF catalysts efficiently removed toxic metal pollutants (Pb2+, Hg2+, Cd2+, and Cu2+) from aqueous solutions with high adsorption capacity.

High-Efficacy Hierarchical Dy2O3/TiO2 Nanoflower toward Wastewater Reclamation: A Combined Photoelectrochemical and Photocatalytic Strategy.

Developing a sustainable photocatalyst is crucial to mitigate the foreseeable energy shortage and environmental pollution caused by the rapid advancement of global industry. We developed Dy2O3/TiO2 nanoflower (TNF) with a hierarchical nanoflower structure and a near-ideal anatase crystallite morphology to degrade aqueous rhodamine B solution under simulated solar light irradiation. The prepared photocatalyst was well-characterized using powder X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, energy-dispersive spectroscopy, scanning electron microscopy, Brunauer-Emmett-Teller, diffuse reflectance UV-vis spectra, and X-ray photoelectron spectroscopy. Further analysis was performed to highlight the photoelectrochemical activity of the prepared photocatalysts such as electrochemical impedance spectroscopy, linear sweep voltammetry, photocurrent response, and a Mott-Schottky study. The crystalline Dy2O3/TNF exhibits superb photocatalytic activity attributed to the improved charge transfer, reduced recombination rate of the electron-hole pairs, and a remarkable red-shift in light absorption.

Effectiveness of Standardized Protocol for Oxygen Therapy on Improving Nurses' Performance and Patients' Health Outcome.

AIMS: assess nurses' knowledge and performance-related safe administration of oxygen (O2) therapy; apply an intervention program for nurses about standardized protocol for oxygen; and evaluate the effectiveness of standardized protocol for oxygen in improving nurses' performance and patients' health outcomes. DESIGN: a quasi-experimental study was used. SETTING: the current study was conducted at three hospitals in Sakaka City with totally different medical aid units (ICUs), CCUs, emergency care departments (ED), medical and surgical wards, pediatric care units (PICUs), neonatal intensive care units (NICUs), pediatric emergency care departments (PED) and pediatric inpatient\outpatient departments. SUBJECTS: a convenience sample of 105 nurses and 105 patients was divided into 55 patients in the control group who received routine care and 50 patients in the study group who received intervention. FINDINGS: 34.3% of studied nurses had poor knowledge pre-intervention compared with 17% post-intervention. Moreover, 33.3% of them had satisfactory knowledge pre-intervention versus 21% post-intervention. Only 5.7% of them had excellent knowledge pre-intervention, compared with 34.4% post-intervention. Concerning the complications of oxygen therapy, only 10.5% did not have complications in the control group versus 62.9% in the study group, 33.3% of the control group had cyanotic lips and fingernails pre-intervention, versus 7.6% in the study group; 10.5% had oxygen toxicity in the control group, versus 7.6% in the study group, with a highly statistically significant difference at p 0.001 for all. CONCLUSION: the current results of this study concluded that there was improvement in nurses' knowledge and practice related to oxygen therapy post-intervention. Moreover, when the standard protocol for safe oxygen therapy was used in a positive way, it led to better health for patients and fewer problems with oxygen therapy.

Extent of COVID-19 Healthcare Services of Isolation Center of Private Hospital across Khartoum State, Sudan.

Introduction: Spatial presentation is considered a useful tool for analyzing and mapping the frequencies of incidences of different pathogens. Khartoum State accounted for 78% of the overall cases of COVID-19 in Sudan. The aim of this study was to present the spatial extent of healthcare services of a private isolation center during the pandemic at the locality level. Materials and Methods: A spatial descriptive study was conducted using ArcGIS to present the locations of all COVID-19 patients who attended Imperial Hospital isolation center on November-December 2020 in Khartoum, Sudan. Results: Patients diagnosed with COVID-19 during the study period were 188; they had attended Imperial Hospital from 9 states. Patients from Khartoum State were 167 patients. Of those 167 patients, 75 were from the Khartoum locality; it is the locality in which Imperial Hospital is located, followed by Khartoum Bahri (34 patients), Omdurman (19 patients), and South Khartoum (14 patients), while 10 patients each were from the Sharg En Nile and Karary localities. Conclusion: Patients from 8 different states of Sudan had travelled to reach Khartoum State to get health services. At the state level, Khartoum State was the most benefited state from the healthcare services of Imperial Hospital. At a locality level, Khartoum locality was the most benefited one.

Synthesis of metal anthranilate complexes: catalytic and antipathogenic studies.

BACKGROUND: Anthranilic acid is an active compound with diverse biological activities such as anti-inflammatory, antineoplastic, anti-malarial and α-glucosidase inhibitory properties. It can also chelate transition metals to form complexes with applications as antipathogens, photoluminescent materials, corrosion inhibitors, and catalysts. RESULTS: Anthranilic acid complexes (1-10) of Zn(II), Bi(III), Ag(I), Fe(II), Co(II), Cu(II), Mn(II), Al, Ni(II), and Cr(III) were synthesized and characterized using thermogravimetric (TGA), elemental analysis, FT-IR, UV-vis spectrometry, mass spectrometry and magnetic susceptibility. The morphology and size of metal complex (1-10) particles were determined by scanning electron microscope (SEM) and the surface area was determined by BET analysis. TGA and CHN analysis data indicated that the stoichiometries of complexes were 1:2 metal/ligand except for Ag(I), Al and Bi. Furthermore, DFT study was performed to optimize the structure of selected complexes. The complexes (1-10) were evaluated for their catalytic activity in the reduction of 4-nitrophenol (4-NP), antibacterial activity against S. aureus, P. aeroginosa and E. coli as well as their antifungal activity against F. solani and A. niger. The complexes were also tested against the second-stage juveniles (J2) root-knot nematodes. CONCLUSION: Co(II) complex 5 and Cu(II) complex 6 showed high catalytic activity for the reduction of 4-NP to 4-aminophenol (4-AP). Ag(I) complex 3 showed the best activity against the pathogens that were tested namely clinically important bacteria S. aureus, P. aeroginosa and E. coli, commercially important fungi F. solani and A. niger and J2 root-knot nematodes M. javanica.

AM-UNet: automated mini 3D end-to-end U-net based network for brain claustrum segmentation.

Recent advances in deep learning (DL) have provided promising solutions to medical image segmentation. Among existing segmentation approaches, the U-Net-based methods have been used widely. However, very few U-Net-based studies have been conducted on automatic segmentation of the human brain claustrum (CL). The CL segmentation is challenging due to its thin, sheet-like structure, heterogeneity of its image modalities and formats, imperfect labels, and data imbalance. We propose an automatic optimized U-Net-based 3D segmentation model, called AM-UNet, designed as an end-to-end process of the pre and post-process techniques and a U-Net model for CL segmentation. It is a lightweight and scalable solution which has achieved the state-of-the-art accuracy for automatic CL segmentation on 3D magnetic resonance images (MRI). On the T1/T2 combined MRI CL dataset, AM-UNet has obtained excellent results, including Dice, Intersection over Union (IoU), and Intraclass Correlation Coefficient (ICC) scores of 82%, 70%, and 90%, respectively. We have conducted the comparative evaluation of AM-UNet with other pre-existing models for segmentation on the MRI CL dataset. As a result, medical experts confirmed the superiority of the proposed AM-UNet model for automatic CL segmentation. The source code and model of the AM-UNet project is publicly available on GitHub: https://github.com/AhmedAlbishri/AM-UNET.