ABSTRACT
BACKGROUND: The aim of this study is to evaluate the dimensional accuracy of heat polymerized PMMA denture base clamped by the conventional method and by R.S technique and cured by a different curing cycle. MATERIALS & METHODS: In this study, a total of 40 standardized maxillary record bases were fabricated with seven reference points: Point A - Incisive papilla, Point B & C - Canine region on either side, Point E & G - Midpoint of tuberosities on either side, Point F- Midpoint of the line joining the two tuberosities, Point D- Midpoint between the line joining A and F. Group A: Ten maxillary record bases were fabricated by conventional clamping method and cured by long curing cycle. Group A1: Ten maxillary record bases were fabricated by R.S tension clamping method and cured by long curing cycle. Group B: Ten maxillary record bases were fabricated by conventional clamping method and cured by short curing cycle. Group B1: Ten maxillary record bases were fabricated by R.S tension clamping method and cured by short curing cycle. The distances between the reference points i.e. A-B, A-C, A-D, D-F, B-E, C-G, E-F, F-G, B-D, D-G, CD, D-E of all three thermoplastic denture base plates were measured and recorded with the help of a travelling microscope and were used for comparison with the measured and recorded readings of processed acrylic denture bases. The data obtained was analyzed by using the One Way Analysis of Variance. RESULTS: The overall results of the in vitro study indicate that among all the PMMA bases cured by the two clamping systems and the different curing cycle, group A` was the most dimensionally stable, followed by control group A, then followed by B` and B was most unstable. CONCLUSION: The study concluded that the denture bases fabricated by the R.S Technique using the long curing cycle would produce the most dimensionally stable PMMA denture bases. How to cite the article: Babu MR, Rao CS, Ahmed ST, Bharat JS, Rao NV, Vinod V. A comparative evaluation of the dimensional accuracy of heat polymerised PMMA denture base cured by different curing cycles and clamped by R S technique and conventional method - An In-vitro study. J Int Oral Health 2014;6(2):68-75.
ABSTRACT
Use of domestic microwave oven has been suggested as a method of disinfecting a number of dental materials used in dental practice. This study was done to analyse the effect of microwave irradiation on vinyl polysiloxane putty impression material (3M ESPE, Express™ STD) contaminated with test organisms (Staphylococcus aureus, Pseudomonas aeruginosa, Candida albicans. 180 square shaped specimens of addition silicon putty material were prepared and divided into 3 groups for three test organisms. The 3 groups were subdivided into 4 subgroups (n = 15) for different exposure parameters (control group 5, 6 and 7 min exposure at 650 W. The specimens were contaminated using standard inoculums of test organism and then were irradiated using domestic microwaves. Broth cultures of the control and test group specimens were plated on selective media culture plates. Colonies formed were counted. Data analyses included Kruskal-Walli's ANOVA and Mann-Whitney's tests. Nil values shows complete elimination of C. albicans and P. aeruginosa after 5, 6 and 7 min exposure. Staphylococcus aureus showed colonies with the mean value of 7.6 × 10(3) ± 2.3 × 10(3), 4.6 × 10(3) ± 2.6 × 10(3) after 5 and 6 min respectively and nil values after 7 min exposure. 5 min exposure caused complete elimination of C. albicans and P. aeruginosa strains, while 7 min exposure eliminated S. aureus completely.
ABSTRACT
AIM: The aim of this study is to evaluate the dimensional accuracy of heat polymerized acrylic resin denture base clamped by the conventional method and by new-press technique and cured by long curing cycle. MATERIALS AND METHODS: In this study, a total of 60 standardized maxillary record bases were fabricated with seven reference points as follows: Point A: Incisive papilla, Point B and C: Canine region on either side Point E and G: Midpoint of tuberosities on either side Point F: Midpoint of the line joining the two tuberosities Point D: Midpoint between the line joining A and F. GROUP A: Ten maxillary record bases were fabricated by conventional clamping method and cured by long curing cycle. GROUP A': Ten maxillary record bases were fabricated by New Press or RS tension clamping method and cured by long curing cycle. The distances between the reference points, i.e. A-B, A-C, A-D, D-F, B-E, C-G, E-F, F-G, B-D, D-G, C-D, D-E of all three thermoplastic denture base plates were measured and recorded with the help of travelling microscope and were used for comparison with the measured and recorded readings of processed acrylic denture bases. The data obtained was analyzed by using the one-way analysis of variance and HSD Multiple Comparison Test. RESULTS: The overall results of the study indicate that among all the denture bases cured by the two clamping systems and the long curing cycle, group A' were the most dimensionally stable, followed by control group A. CONCLUSION: The study concluded that the denture bases fabricated by the New Press method using the long curing cycle would produce the most dimensionally stable denture bases.
