Effect of self-ligating bracket type and vibration on frictional force and stick-slip phenomenon in diverse tooth displacement conditions: an in vitro mechanical analysis.

OBJECTIVE: To evaluate the effects of self-ligating bracket (SLB) type and vibration on frictional force and stick-slip phenomenon (SSP) in diverse tooth displacement conditions when a levelling/alignment wire was drawn. MATERIALS AND METHODS: A total of 16 groups were tested (n = 10/group): Two types of SLBs [active SLB (ASLB, In-Ovation R) and passive SLB (PSLB, Damon Q)]; vibration (30 Hz and 0.25 N) and non-vibration conditions; and 4 types of displacement [2mm lingual displacement of the maxillary right lateral incisor (LD), 2mm gingival displacement of the maxillary right canine (GD), combination of LD and GD (LGD), and control]. After applying artificial saliva to the typodont system, 0.018 copper nickel-titanium archwire was drawn by Instron with a speed of 0.5mm/min for 5 minutes at 36.5°C. After static/kinetic frictional forces (SFF/KFF), and frequency/amplitude of SSP were measured, statistical analysis was performed. RESULTS: ASLB exhibited higher SFF, KFF, and SSP amplitude (all P < 0.001) and lower SSF frequency (all P < 0.05) than PSLB in all displacement groups. Vibration decreased SFF, KFF, and SSP amplitude and increased SSP frequency in control and all displacement groups (all P < 0.001). ASLB exhibited lower SSP frequency than PSLB only under non-vibration condition (P < 0.05 in LD and GD, P < 0.01 in LGD). However, regardless of vibration conditions, ASLB demonstrated higher SSP amplitude than PSLB in all displacement groups (all P < 0.001 under non-vibration; all P < 0.01 under vibration). CONCLUSION: Even in tooth displacement conditions, vibration significantly reduced SFF, KFF, SSP amplitude, and increased SPP frequency in both PSLB and ASLB. However, in vivo studies would be needed to confirm the clinical significance.

Effect of tooth displacement and vibration on frictional force and stick-slip phenomenon in conventional brackets: a preliminary in vitro mechanical analysis.

OBJECTIVE: To evaluate the effects of tooth displacement and vibration on frictional force and stick-slip phenomenon (SSP) when conventional brackets were used with a levelling/alignment wire. MATERIALS AND METHODS: The samples consisted of six groups (n = 10 per group) with combinations of tooth displacement (2mm lingual displacement [LD], 2mm gingival displacement [GD], and no displacement [control]) and vibration conditions (absence and presence at 30 Hz and 0.25 N). A stereolithographically made typodont system was used with conventional brackets and elastomeric ligatures. After application of artificial saliva, static/kinetic frictional forces (SFF/KFF) and frequency/amplitude of SSP were measured while drawing a 0.018-inch copper nickel-titanium (Cu-NiTi) archwire at a speed of 0.5mm/min for 5 minutes at 36.5 degree celsius. Two-way analysis of variance and independent t-test were performed. RESULTS: Tooth displacement increased SFF and KFF (control < LD < GD, all P < 0.001) and reduced SSP frequency (control > [LD, GD], P < 0.01). Vibration reduced SFF, KFF, and SSP amplitude in the control group (P < 0.05, P < 0.05, and P < 0.001, respectively), but not in the LD and GD groups. SSP frequency was increased by vibration in the control, LD, and GD groups (all P < 0.001), and it was lower in the LD and GD groups than in the control group (P < 0.01). CONCLUSIONS: When conventional brackets and a 0.018-inch Cu-NiTi archwire were used in the tooth displacement conditions (LD and GD), vibration did not significantly reduce SFF, KFF, or SSP amplitude.

Crystal structure of malonyl CoA-Acyl carrier protein transacylase from Xanthomanous oryzae pv. oryzae and its proposed binding with ACP.

Xanthomonas oryzae pv. oryzae (Xoo) is a plant bacterial pathogen that causes bacterial blight (BB) disease, resulting in serious production losses of rice. The crystal structure of malonyl CoA-acyl carrier protein transacylase (XoMCAT), encoded by the gene fabD (Xoo0880) from Xoo, was determined at 2.3 Å resolution in complex with N-cyclohexyl-2-aminoethansulfonic acid. Malonyl CoA-acyl carrier protein transacylase transfers malonyl group from malonyl CoA to acyl carrier protein (ACP). The transacylation step is essential in fatty acid synthesis. Based on the rationale, XoMCAT has been considered as a target for antibacterial agents against BB. Protein-protein interaction between XoMCAT and ACP was also extensively investigated using computational docking, and the proposed model revealed that ACP bound to the cleft between two XoMCAT subdomains.