Aqueous phase reforming of birch and pine hemicellulose hydrolysates.

The current work focuses on studying the aqueous phase reforming (APR) of pine and birch hydrolysate obtained from waste wood by using organic acids available from biorefineries. Processing of representative synthetic mixtures was utilized in the work in order to support data interpretation related to the influence of different chemical compound and processing parameters on the APR of the actual hydrolysates. It was shown, that hydrogenation of the hydrolysates prior to APR was not feasible in the presence of formic acid, which ruled out one potential processing route. However, it was successfully demonstrated that birch and pine hydrolysates could be directly processed obtaining close to full conversion. The best results were obtained with tailored bimetallic Pd-Pt/sibunit catalyst in a trickle bed reactor system in the temperature range 175 °C-225 °C.

Heterogeneous Catalytic Synthesis of Methyl Lactate and Lactic Acid from Sugars and Their Derivatives.

Recent developments in sugar transformations to methyl lactate and lactic acid are critically summarized. The highest yield of methyl lactate from glucose obtained over Sn(salen)/octylmethyl imidazolium bromide catalyst was 68 % at 160 °C whereas the highest yield of lactic acid of 58 % was achieved over hierarchical Lewis acidic Sn-Beta catalysts at 200 °C under inert atmosphere. In addition to the desired products also humins are formed in water whereas in methanol alkyl glucosides- and -fructosides as well as acetals were generated, especially in the presence of Brønsted-acidic sites. The main challenges limiting the industrial feasibility of these reactions are incomplete liquid phase mass balance closure, complicated product analysis and a lack of kinetic data. In addition to reporting optimized reaction conditions and catalyst properties also catalyst reuse and regeneration as well as kinetic modelling and continuous operation are summarized.

Hydrogenation of crude and purified d-glucosone generated by enzymatic oxidation of d-glucose.

d-Fructose is an important starting material for producing furfurals and other industrially important chemicals. While the base-catalyzed and enzymatic conversion of d-glucose to d-fructose is well known, the employed methods typically provide limited conversion. d-Glucosone can be obtained from d-glucose by enzymatic oxidation at the C2 position and, subsequently, selectively hydrogenated at C1 to form d-fructose. This work describes an investigation on the hydrogenation of d-glucosone, using both chromatographically purified and crude material obtained directly from the enzymatic oxidation, subjected to filtration and lyophilization only. High selectivities towards d-fructose were observed for both starting materials over a Ru/C catalyst. Hydrogenation of the crude d-glucosone was, however, inhibited by the impurities resulting from the enzymatic oxidation process. Catalyst deactivation was observed in the case of both starting materials.

Hydrodeoxygenation of Isoeugenol over Alumina-Supported Ir, Pt, and Re Catalysts.

Hydrodeoxygenation (HDO) of isoeugenol (IE) was investigated using bimetallic iridium-rhenium and platinum-rhenium catalysts supported on alumina in the temperature and pressure ranges of 200-250 °C and 17-40 bar in nonpolar dodecane as a solvent. The main parameters were catalyst type, hydrogen pressure, and initial concentration. Nearly quantitative yield of the desired product, propylcyclohexane (PCH), at complete conversion in 240 min was obtained with Ir-Re/Al2O3 prepared by the deposition-precipitation method using 0.1 mol/L IE initial concentration. High iridium dispersion together with a modification effect of rhenium provided in situ formation of the IrRe active component with reproducible catalytic activity for selective HDO of IE to PCH. The reaction rate was shown to increase with the increasing initial IE concentration promoting also HDO and giving a higher liquid phase mass balance. Increasing hydrogen pressure benefits the PCH yield.

Zeta Potential of Beta Zeolites: Influence of Structure, Acidity, pH, Temperature and Concentration.

Measurements of the zeta potential of solid heterogeneous supports are important for preparation of metal supported catalysts and for shaping zeolites into extrudates. In the current work, different types of heterogeneous support materials such as SiO2, Al2O3, and a range of beta zeolites of different silica- to-alumina ratio were analysed. It was observed that parameters such as temperature, pH and acidity significantly affect the zeta potential. In several instances, depending on the materials' acidity and microstructure, maxima in zeta potential were observed. The solid materials were thoroughly characterized using XRD, SEM, EDX, TEM, nitrogen physisorption, Al-NMR and FTIR with pyridine before zeta potential measurements.

Kinetics of Catalytic Wet Peroxide Oxidation of Phenolics in Olive Oil Mill Wastewaters over Copper Catalysts.

During olive oil extraction, large amounts of phenolics are generated in the corresponding wastewaters (up to 10 g dm-3). This makes olive oil mill wastewater toxic and conventional biological treatment challenging. The catalytic wet peroxide oxidation process can reduce toxicity without significant energy consumption. Hydrogen peroxide oxidation of phenolics present in industrial wastewaters was studied in this work over copper catalysts focusing on understanding the impact of mass transfer and establishing the reaction kinetics. A range of physicochemical methods were used for catalyst characterization. The optimal reaction conditions were identified as 353 K and atmospheric pressure, giving complete conversion of total phenols and over 50% conversion of total organic carbon content. Influence of mass transfer on the observed reaction rate and kinetics was investigated, and parameters of the advanced kinetic model and activation energies for hydrogen peroxide decomposition and polyphenol oxidation were estimated.

Pyrolysis of softwood carbohydrates in a fluidized bed reactor.

In the present work pyrolysis of pure pine wood and softwood carbohydrates, namely cellulose and galactoglucomannan (the major hemicellulose in coniferous wood), was conducted in a batch mode operated fluidized bed reactor. Temperature ramping (5 degrees C/min) was applied to the heating until a reactor temperature of 460 degrees C was reached. Thereafter the temperature was kept until the release of non-condensable gases stopped. The different raw materials gave significantly different bio-oils. Levoglucosan was the dominant product in the cellulose pyrolysis oil. Acetic acid was found in the highest concentrations in both the galactoglucomannan and in the pine wood pyrolysis oils. Acetic acid is most likely formed by removal of O-acetyl groups from mannose units present in GGM structure.