ABSTRACT
Agitation operations produce numerous pathogenic bioaerosols in WWTPs1. QMRA2 can determine risks of persons exposed to these bioaerosols. However, QMRA framework cannot help stakeholders in immediately deciding whether a risk is intolerable. Thus, evaluating threshold of acceptable exposure concentration is an urgent issue but is still rarely addressed in WWTPs. This study analyzed TLV3 benchmarks of E. coli and S. aureus bioaerosols emitted from a WWTP by reverse-QMRA. Furthermore, variance of input parameters was clarified by sensitivity analysis. Results showed that, under conservative and optimistic estimates, TLV of technicians was 1.52-2.06 and 1.26-1.68 times as large as those of workers, respectively; wearing mask drive TLV up to 1-2 orders of magnitude; TLV of M4 was at most 1.33 and 1.31 times as large as that of RD5, respectively. For sensitivity analysis, removal fraction by equipping PPE enlarge TLV for effortlessly obtaining an acceptable assessment result; exposure time was dominant when without PPE excepting the scenario of technicians exposed to E. coli bioaerosol. This study helps establish threshold guidelines for bioaerosols in WWTPs and contribute innovative perspectives for stakeholders.
Subject(s)
Wastewater , Water Purification , Humans , Escherichia coli , Staphylococcus aureus , Threshold Limit Values , Risk Assessment , Aerosols/analysis , Air MicrobiologyABSTRACT
A large number of pathogenic bioaerosols are generated during the treatment process of wastewater treatment plants (WWTPs), and they can pose potential risks to human health. Therefore, this study systematically analyzed the emission characteristics of Staphylococcus aureus bioaerosols released from an inverted umbrella aeration tank, a microporous aeration tank, and a residual sludge storage yard in a WWTP, and quantitatively evaluated the health risks of four kinds of exposed populations with nasal/oral breathing patterns under optimistic and conservative estimations. The results displayed that the bioaerosol concentration in inverted umbrella aeration tank was higher than that in microporous aeration tank and residual sludge storage yard. Aerosolization ratio in residual sludge storage yard was an order of magnitude lower than that in aeration tanks. Sludge workers were at higher health risks than the other three exposed populations. The health risks of nasal breathers (infection risk: 1.62 × 10-5-2.56 × 10-3 pppy; disease burden: 4.24 × 10-8-6.72 × 10-6 DALYs pppy) were 0.61-0.63 times higher than those of oral breathers (infection risk: 9.95 × 10-6-1.59 × 10-3 pppy; disease burden: 2.61 × 10-8-4.18 × 10-6 DALYs pppy). For female field engineers using oral breathing, laboratory technicians, and researchers without personal protective equipment (PPE), infection risk and disease burden had the opposite results, which indicated that satisfying one certain benchmark did not mean absolute safety. In addition, health risks of exposed populations were reduced by an order of magnitude after wearing PPE. This study can provide a reliable theoretical basis for the risk prevention of bioaerosols and supply data support for the strategies of health risk control perspectives for local sewage utilities.
Subject(s)
Methicillin-Resistant Staphylococcus aureus , Water Purification , Humans , Sewage , Wastewater , Staphylococcus aureus , Risk Assessment , Water Purification/methodsABSTRACT
Aeration tanks from activated sludge wastewater treatment plants (WWTPs) can release a large amount of bioaerosols that can pose health risks. However, risk characterization of bioaerosols emissions form wastewater treatment plants is currently not systematically carried out and still in its infancy. Therefore, this study investigated emission characteristic of two indicator model bioaerosols Staphylococcus aureus and Escherichia coli, emitted from aeration tanks of a municipal WWTP. Monte Carlo simulation was then used to quantitatively assess microbial risk posed by different aeration modes under optimistic and conservative estimates. Further to this, two different exposure scenarios were considered during 3 days sampling campaign in autumn and winter. Results showed that the bioaerosol concentration from microporous aeration tank (20-262 CFU m-3) was one order of magnitude lower than rotating disc aeration tank. Average aerosolization rate was 7.5 times higher with mechanical aeration mode. Health risks of exposed populations were 0.4 and 9.6 times higher in winter than in autumn for E. coli and S. aureus bioaerosol, respectively. Health risks of staff members were 10 times higher than academic visitors. Interesting results were observed for academic visitors without personal protective equipment (PPE) respectively exposed to S. aureus and E. coli bioaerosol in autumn and winter: while the derived infection risk met the United States Environmental Protection Agency (U.S. EPA) benchmark under optimistic estimation, the disease risk burden was over the World Health Organization (WHO) benchmark under conservative estimation. These revealed that only satisfying one of the two benchmarks didn't mean absolute acceptable health risk. This study could facilitate the development of better understanding of bioaerosol quantitative assessment of risk characterizations and corresponding appropriate risk control strategies for wastewater utilities.
Subject(s)
Wastewater , Water Purification , Aerosols , Air Microbiology , Escherichia coli , Humans , Sewage , Staphylococcus aureusABSTRACT
Biological treatment in wastewater treatment plants releases high amounts of pathogenic bioaerosols. Quantitative microbial risk assessment is a framework commonly used for quantitative risk estimation for occupational exposure scenarios. However, the quantitative contributions of health-risk-estimate inputted parameters remain ambiguous. Therefore, this research aimed to study the disease burden of workers exposed to Staphylococcus aureus bioaerosol during warm and cold periods and strictly quantify the contributions of the inputted parameters by sensitivity analysis on the basis of Monte Carlo simulation. Results showed that the disease health risk burden of workers in the warm period was 1.15-6.11 times higher than that of workers in the cold period. The disease health risk burden of workers without personal protective equipment was 23.83-36.55 times higher than that of workers with personal protective equipment. Sensitivity analysis showed that exposure concentration and aerosol ingestion rate were the first and second predominant factors, respectively; the sensitivity partitioning coefficient of the former was 1.17-1.35 times the value of the latter. In addition, no remarkable differences were revealed in the sensitivity percentage ratio between warm and cold periods. The findings could contribute to the mitigation measures for the management of public health risks.