Approaching a zero-waste strategy by reuse in New York City: Challenges and potential.

In New York City (NYC), the aspiring target of zero waste to landfills is robustly engaging the often poorly understood solid waste management technique of reuse. The reuse activities occurring in NYC are reported, accounting for the quantities of reuse of various products, such as furniture, appliances and automobile accessories, amongst others. The quantities of products are translated to reuse mass and net CO2-eq emissions saved as a consequence of reuse. This quantitative assessment employs the Reuse Impact Calculator (RIC), based on the Waste Reduction Model (WARM). The RIC is a novel calculator used to quantitatively assess the environmental impact of material reuse. It uses the information about the material to be reused from the WARM database and estimates the emissions and energy savings based on the product's final destination, that is, reuse, landfill, recycle or composting. A close monitoring of reuse activities in NYC shows 45 × 106 kg of reuse occurring for different products that would otherwise be directed to landfills. The net emissions reduced annually by reuse is approximately 122 × 106 kg of CO2-eq. This article compares the NYC reuse activities with that occurring in some select cities of the world. It is shown that the maximum recycle potential is saturated at 66%, and only auxiliary strategies like reuse can achieve the zero waste to landfill ambitions. Furthermore, this work discusses the role of reuse in the circular economy, wherein the resource utilization is maximized by increasing the shelf life of the product, and thereby enabling a maximum reuse potential.

Valorization of Char From Biomass Gasification as Catalyst Support in Dry Reforming of Methane.

This study responds to the need of finding innovative routes for valorizing char derived from biomass gasification. Char is currently treated as a waste representing an energetic and economic loss for plant owners. However, it displays many similarities to activated carbon (AC) and could replace it in several applications. In this regard, the current work investigates the use of gasification derived char as catalyst support in dry reforming of methane (DRM) reactions. Char collected from a commercial biomass gasifier currently in operation was characterized and employed for the synthesis of cobalt catalysts. The catalysts were characterized and tested in an atmospheric pressure fixed bed reactor operating at 850°C with CH4:CO2 = 1 and a weight hourly space velocity of 6,500 mL g-1 h-1. The effectiveness of the synthesized catalysts was defined based on CO2 and CH4 conversions, the corresponding H2 and CO yields and their stability. Accordingly, catalysts were synthesized with cobalt loading of 10, 15 and 20 wt.% on untreated and HNO3 treated char, and the catalyst with optimum comparative performance was promoted with 2 wt.%MgO. Catalysts prepared using untreated char showed low average conversions of 23 and 17% for CO2 and CH4, yields of 1 and 14% for H2 and CO, and deactivated after few minutes of operation. Higher metal loadings corresponded to lower conversion and yields. Although HNO3 treatment slightly increased conversions and yields and enhanced the stability of the catalyst, the catalyst deactivated again after few minutes. On the contrary, MgO addition boosted the catalyst performances leading to conversions (95 and 94% for CO2 and CH4) and yields (44 and 53% for H2 and CO) similar to what obtained using conventional supports such as Al2O3. Moreover, MgO catalysts proved to be very stable during the whole duration of the test.