ABSTRACT
This study aims to compare the efficiency of anodic oxidation with electrogenerated H2O2 (AO-H2O2), electro-Fenton (EF), and their association with UV irradiation (photo anodic oxidation (PAO), and photo electro-Fenton (PEF) for the removal of Direct Red 23 from wastewater using a BDD/carbon felt cell in chloride and sulfate medium and in their combination. The effect of the supporting electrolyte was investigated in AO-H2O2 and EF processes. High discoloration efficiency was obtained in chloride media while a higher mineralization rate was achieved in sulfate media. The EF process reached higher total organic carbon (TOC) removal efficiency than AO-H2O2. 90% TOC removal rate was achieved by the EF against 82% by AO-H2O2 in sulfate media. The influence of using the mixt supporting electrolyte formed of 75% Na2SO4 + 25% NaCl was found to have beneficial effect on TOC removal, achieving 89% and 97% by AO-H2O2 and EF, respectively. High currents led to higher mineralization rates while low currents yielded to a higher mineralization current efficiency (MCE%) and lower energy consumption (EC). UV irradiation enhanced process efficiency. Mineralization efficiency followed the sequence: AO-H2O2 < PAO < EF < PEF. The PEF process was able to remove TOC completely at 5 mA cm-2 current density and 6 h of electrolysis with a MCE% value of 16.57% and EC value of 1.29 kWh g-1 TOC removed.
Subject(s)
Sulfates , Water Pollutants, Chemical , Anilides , Azo Compounds , Chlorides , Hydrogen Peroxide , Oxidation-Reduction , Water Pollutants, Chemical/analysisABSTRACT
This study deals with the adsorption of PolyCarboxylate Poly(ethylene glycol) esters (PCP) superplasticizers on Na-, Mg- and Ca-saturated Montmorillonite (Mmt) clays. The interactions have been examined through different experimental methods: adsorption isotherms, zeta potential measurements and sedimentation experiments. It was found that PCP adsorption depends both on the architecture of PCP molecules and the nature of cation located on the interlayer exchange sites of the Montmorillonite. Whatever the PCP, a larger amount was adsorbed on Na-Mont than on Mg-Mont or Ca-Mont. This indicates the occurrence of two adsorption mechanisms: (i) a superficial adsorption via electrostatic interactions between the carboxylate groups of PCP and positively charged sites on clay surfaces, (ii) intercalation of ether units of the PCP grafts in the interlayer space by displacement of water molecules coordinated to the exchangeable cations. Furthermore, despite the weak negative values of the zeta potential, the addition of PCP promotes the stability of the suspensions which is attributed to steric repulsion acting between particles.
