Influence of atmospheric species on the electrical properties of functionalized graphene sheets.

We report on the time-dependent influence of atmospheric species on the electrical properties of functionalized graphene sheets (FGSs). When exposed to laboratory air, FGSs exhibit a significant, irreversible decrease in electrical conductance with time, strongly depending on the oxygen content of the FGSs. To separate the roles of charge carrier density and mobility in this aging process, we performed electron transport measurements using a back-gate field-effect transistor architecture. Investigating the position of the Dirac point under different atmospheres, we found that adsorbed atmospheric species result in pronounced p-doping, which - on a short time scale - can be reversed under nitrogen atmosphere. However, on a time scale of several days, the resistance increases irreversibly, while the Dirac point voltage remains constant. From these experiments, we conclude that the aging of FGSs is related to the chemisorption of atmospheric species leading to enhanced carrier scattering due to an increasing amount of sp3- regions and thus to a reduced charge carrier mobility.

Concentration Fluctuations and Capacitive Response in Dense Ionic Solutions.

We use molecular dynamics simulations in a constant potential ensemble to study the effects of solution composition on the electrochemical response of a double layer capacitor. We find that the capacitance first increases with ion concentration following its expected ideal solution behavior but decreases upon approaching a pure ionic liquid in agreement with recent experimental observations. The nonmonotonic behavior of the capacitance as a function of ion concentration results from the competition between the independent motion of solvated ions in the dilute regime and solvation fluctuations in the concentrated regime. Mirroring the capacitance, we find that the characteristic decay length of charge density correlations away from the electrode is also nonmonotonic. The correlation length first decreases with ion concentration as a result of better electrostatic screening but increases with ion concentration as a result of enhanced steric interactions. When charge fluctuations induced by correlated ion-solvent fluctuations are large relative to those induced by the pure ionic liquid, such capacitive behavior is expected to be generic.

Intrinsic Catalytic Activity of Graphene Defects for the Co(II/III)(bpy)3 Dye-Sensitized Solar Cell Redox Mediator.

We demonstrate that functionalized graphene, rich with lattice defects but lean with oxygen sites, catalyzes the reduction of Co(III)(bpy)3 as well as platinum does, exhibiting a rate of heterogeneous electron transfer, k0, of ∼6 × 10(-3) cm/s. We show this rate to be an order of magnitude higher than on oxygen-site-rich graphene oxide, and over 2 orders of magnitude higher than on the basal plane of graphite (as a surrogate for pristine graphene). Furthermore, dye-sensitized solar cells using defect-rich graphene monolayers perform similarly to those using platinum nanoparticles as the catalyst.

Anomalous Capacitance Maximum of the Glassy Carbon-Ionic Liquid Interface through Dilution with Organic Solvents.

We use electrochemical impedance spectroscopy to measure the effect of diluting a hydrophobic room temperature ionic liquid with miscible organic solvents on the differential capacitance of the glassy carbon-electrolyte interface. We show that the minimum differential capacitance increases with dilution and reaches a maximum value at ionic liquid contents near 5-10 mol% (i.e., ∼1 M). We provide evidence that mixtures with 1,2-dichloroethane, a low-dielectric constant solvent, yield the largest gains in capacitance near the open circuit potential when compared against two traditional solvents, acetonitrile and propylene carbonate. To provide a fundamental basis for these observations, we use a coarse-grained model to relate structural variations at the double layer to the occurrence of the maximum. Our results reveal the potential for the enhancement of double-layer capacitance through dilution.

Buckling of dielectric elastomeric plates for soft, electrically active microfluidic pumps.

Elastic instabilities, when properly implemented within soft, mechanical structures, can generate advanced functionality. In this work, we use the voltage-induced buckling of thin, flexible plates to pump fluids within a microfluidic channel. The soft electrodes that enable electrical actuation are compatible with fluids, and undergo large, reversible deformations. We quantified the onset of voltage-induced buckling, and measured the flow rate within the microchannel. This embeddable, flexible microfluidic pump will aid in the generation of new stand-alone microfluidic devices that require a tunable flow rate.

Energetics of defects on graphene through fluorination.

Functionalized graphene sheets (FGSs) comprise a unique member of the carbon family, demonstrating excellent electrical conductivity and mechanical strength. However, the detailed chemical composition of this material is still unclear. Herein, we take advantage of the fluorination process to semiquantitatively probe the defects and functional groups on graphene surface. Functionalized graphene sheets are used as substrate for low-temperature (<150 °C) direct fluorination. The fluorine content has been modified to investigate the formation mechanism of different functional groups such as C-F, CF2, O-CF2 and (C=O)F during fluorination. The detailed structure and chemical bonds are simulated by density functional theory (DFT) and quantified experimentally by nuclear magnetic resonance (NMR). The electrochemical properties of fluorinated graphene are also discussed extending the use of graphene from fundamental research to practical applications.

Dispersion stability of functionalized graphene in aqueous sodium dodecyl sulfate solutions.

The colloidal stability of functionalized graphene sheets (FGSs) in aqueous sodium dodecyl sulfate (SDS) solutions of different concentrations was studied by optical microscopy and ultraviolet-visible light absorption after first dispersing the FGSs ultrasonically. In up to ∼10 µM SDS solutions, FGSs reaggregated within a few minutes, forming ramified structures in the absence of SDS and increasingly compact structures as the amount of SDS increased. Above ∼10 µM, the rate of reaggregation decreased with increasing SDS concentration; above ∼40 µM, the suspensions were colloidally stable for over a year. The concentration of ∼40 µM SDS lies 2 orders of magnitude below the critical surface aggregation concentration of ∼1.8 mM SDS on FGSs but above the concentration (∼18 µM) at which SDS begins to form a monolayer on FGSs. Neither surface micelle nor dense monolayer coverage is therefore required to obtain stable aqueous FGS dispersions. We support our experimental results by calculating the van der Waals and electrostatic interaction energies between FGSs as a function of SDS concentration and show that the experimentally observed transition from an unstable to a stable dispersion correlates with a transition from negative to positive interaction energies between FGSs in the aggregated state. Furthermore, our calculations support experimental evidence that aggregates tend to develop a compact structure over time.

Electrochemical sensing of nitric oxide with functionalized graphene electrodes.

The intrinsic electrocatalytic properties of functionalized graphene sheets (FGSs) in nitric oxide (NO) sensing are determined by cyclic voltammetry with FGS monolayer electrodes. The degrees of reduction and defectiveness of the FGSs are varied by employing different heat treatments during their fabrication. FGSs with intermediate degrees of reduction and high Raman ID to IG peak ratios exhibit an NO oxidation peak potential of 794 mV (vs 1 M Ag/AgCl), closely matching values obtained with a platinized Pt control (791 mV) as well as recent results from the literature on porous or biofunctionalized electrodes. We show that the peak potential obtained with FGS electrodes can be further reduced to 764 mV by incorporation of electrode porosity using a drop-casting approach, indicating a stronger apparent electrocatalytic effect on porous FGS electrodes as compared to platinized Pt. Taking into consideration effects of electrode morphology, we thereby demonstrate that FGSs are intrinsically as catalytic toward NO oxidation as platinum. The lowered peak potential of porous FGS electrodes is accompanied by a significant increase in peak current, which we attribute either to pore depletion effects or an amplification effect due to subsequent electrooxidation reactions. Our results suggest that the development of sensor electrodes with higher sensitivity and lower detection limits should be feasible with FGSs.

Cementation of colloidal particles on electrodes in a galvanic microreactor.

We have studied the processes leading to the cementation of colloidal particles during their autonomous assembly on corroding copper electrodes within a Cu-Au galvanic microreactor. We determined the onset of particle immobilization through particle tracking, monitored the dissolution of copper as well as the deposition of insoluble products of the corrosion reactions in situ, and showed that particle immobilization initiated after reaction products (RPs) began to deposit on the electrode substrate. We further demonstrated that the time and the extent of RP precipitation and thus the strength of the particle-substrate bond could be tuned by varying the amount of copper in the system and the microreactor pH. The ability to cement colloidal particles at locations undergoing corrosion illustrates that the studied colloidal assembly approach holds potential for applications in dynamic material property adaptation.

Adsorption of sodium dodecyl sulfate on functionalized graphene measured by conductometric titration.

We report on the adsorption of sodium dodecyl sulfate (SDS) onto functionalized graphene sheets (FGSs) in an aqueous system, measured at broad SDS and FGS concentration ranges by conductometric surfactant titration. At dilute SDS concentrations (<12 µM in bulk solution), there is evidence of a counterion exchange between hydronium ions (from the dissociation of acidic chemical functionalities on FGS) and sodium ions coadsorbing with dodecyl sulfate monomers onto FGSs. We find that, for FGS with a carbon-to-oxygen ratio of ~18, monolayer adsorption of SDS on FGS reaches full surface coverage by ~12 µM SDS. Additionally, the critical surface aggregation concentration (csac) for surface micelle formation on FGS is measured to be ~1.5 mM SDS. The transition from monolayer adsorption to surface micelle formation appears to occur at a similar SDS concentration on FGSs as on graphite, suggesting there is little difference in the surfactant adsorption behavior on both materials. We estimate that the FGS surface area available for SDS adsorption is ~600 m(2)/g, which is significantly less than expected for FGSs in suspension and indicates the presence of regions on FGS on which SDS adsorption does not occur.

Directed motion of colloidal particles in a galvanic microreactor.

The mechanisms leading to the deposition of colloidal particles in a copper-gold galvanic microreactor are investigated. Using in situ current density measurements and particle velocimetry, we establish correlations between the spatial arrangement and the geometry of the electrodes, current density distribution, and particle aggregation behavior. Ionic transport phenomena are responsible for the occurrence of strongly localized high current density at the edges and corners of the copper electrodes at large electrode separation, leading to a preferential aggregation of colloidal particles at the electrode edges. Preferential aggregation appears to be the result of a combination of electrophoretic effects and changes in bulk electrolyte flow patterns. We demonstrate that electrolyte flow is most likely driven by electrochemical potential gradients of reaction products formed during the inhomogeneous copper dissolution.

Enhanced thermal decomposition of nitromethane on functionalized graphene sheets: ab initio molecular dynamics simulations.

The burning rate of the monopropellant nitromethane (NM) has been observed to increase by adding and dispersing small amounts of functionalized graphene sheets (FGSs) in liquid NM. Until now, no plausible mechanisms for FGSs acting as combustion catalysts have been presented. Here, we report ab initio molecular dynamics simulations showing that carbon vacancy defects within the plane of the FGSs, functionalized with oxygen-containing groups, greatly accelerate the thermal decomposition of NM and its derivatives. This occurs through reaction pathways involving the exchange of protons or oxygens between the oxygen-containing functional groups and NM and its derivatives. FGS initiates and promotes the decomposition of the monopropellant and its derivatives, ultimately forming H(2)O, CO(2), and N(2). Concomitantly, oxygen-containing functional groups on the FGSs are consumed and regenerated without significantly changing the FGSs in accordance with experiments indicating that the FGSs are not consumed during combustion.

Functionalized graphene sheets as a versatile replacement for platinum in dye-sensitized solar cells.

Several techniques for fabricating functionalized graphene sheet (FGS) electrodes were tested for catalytic performance in dye-sensitized solar cells (DSSCs). By using ethyl cellulose as a sacrificial binder, and partially thermolyzing it, we were able to create electrodes which exhibited lower effective charge transfer resistance (<1 Ω cm(2)) than the thermally decomposed chloroplatinic acid electrodes traditionally used. This performance was achieved not only for the triiodide/iodide redox couple, but also for the two other major redox mediators used in DSSCs, based on cobalt and sulfur complexes, showing the versatility of the electrode. DSSCs using these FGS electrodes had efficiencies (η) equal to or higher than those using thermally decomposed chloroplatinic acid electrodes in each of the three major redox mediators: I (η(FGS) = 6.8%, η(Pt) = 6.8%), Co (4.5%, 4.4%), S (3.5%, 2.0%). Through an analysis of the thermolysis of the binder and composite material, we determined that the high surface area of an electrode, as determined by nitrogen adsorption, is consistent with but not sufficient for high performing electrodes. Two other important considerations are that (i) enough residue remains in the composite to maintain structural stability and prevent restacking of FGSs upon the introduction of the solvent, and (ii) this residue must not disperse in the electrolyte.

Hierarchically porous graphene as a lithium-air battery electrode.

The lithium-air battery is one of the most promising technologies among various electrochemical energy storage systems. We demonstrate that a novel air electrode consisting of an unusual hierarchical arrangement of functionalized graphene sheets (with no catalyst) delivers an exceptionally high capacity of 15000 mAh/g in lithium-O(2) batteries which is the highest value ever reported in this field. This excellent performance is attributed to the unique bimodal porous structure of the electrode which consists of microporous channels facilitating rapid O(2) diffusion while the highly connected nanoscale pores provide a high density of reactive sites for Li-O(2) reactions. Further, we show that the defects and functional groups on graphene favor the formation of isolated nanosized Li(2)O(2) particles and help prevent air blocking in the air electrode. The hierarchically ordered porous structure in bulk graphene enables its practical applications by promoting accessibility to most graphene sheets in this structure.

Graphene-polypyrrole nanocomposite as a highly efficient and low cost electrically switched ion exchanger for removing ClO4⁻ from wastewater.

Perchlorate (ClO(4)(-)) contamination is a widespread concern affecting water utilities. In the present study, functionalized graphene sheets were employed as the scaffold to synthesize a novel graphene-polypyrrole (Ppy) nanocomposite, which served as an excellent electrically switched ion exchanger for perchlorate removal. Scanning electron microscopy and electrochemical measurements showed that the 3D nanostructured graphene-Ppy nanocomposite exhibited a significantly improved uptake capacity for ClO(4)(-) compared with Ppy film alone. X-ray photoelectron spectroscopy confirmed the uptake and release process of ClO(4)(-) in graphene-Ppy nanocomposite. In addition, the presence of graphene substrate resulted in high stability of graphene-Ppy nanocomposite during potential cycling. The present work provides a promising method for large scale water treatment.

Local voltage drop in a single functionalized graphene sheet characterized by Kelvin probe force microscopy.

We studied the local voltage drop in functionalized graphene sheets of subµm size under external bias conditions by Kelvin probe force microscopy. Using this noninvasive experimental approach, we measured ohmic current-voltage characteristics and an intrinsic conductivity of about 3.7 × 10(5) S/m corresponding to a sheet resistance of 2.7 kΩ/sq under ambient conditions for graphene produced via thermal reduction of graphite oxide. The contact resistivity between functionalized graphene and metal electrode was found to be <6.3 × 10(-7) Ωcm(2).

High surface area tapes produced with functionalized graphene.

We describe a scalable method for producing continuous graphene networks by tape casting surfactant-stabilized aqueous suspensions of functionalized graphene sheets. Similar to all other highly connected graphene-containing networks, the degree of overlap between the sheets controls the tapes' electrical and mechanical properties. However, unlike other graphene-containing networks, the specific surface area of the cast tapes remains high (>400 m(2)·g(-1)). Exhibiting apparent densities between 0.15 and 0.51 g·cm(-3), with electrical conductivities up to 24 kS·m(-1) and tensile strengths over 10 MPa, these tapes exhibit the best combination of properties with respect to density heretofore observed for carbon-based papers, membranes, or films.

Factors controlling the size of graphene oxide sheets produced via the graphite oxide route.

We have studied the effect of the oxidation path and the mechanical energy input on the size of graphene oxide sheets derived from graphite oxide. The cross-planar oxidation of graphite from the (0002) plane results in periodic cracking of the uppermost graphene oxide layer, limiting its lateral dimension to less than 30 µm. We use an energy balance between the elastic strain energy associated with the undulation of graphene oxide sheets at the hydroxyl and epoxy sites, the crack formation energy, and the interaction energy between graphene layers to determine the cell size of the cracks. As the effective crack propagation rate in the cross-planar direction is an order of magnitude smaller than the edge-to-center oxidation rate, graphene oxide single sheets larger than those defined by the periodic cracking cell size are produced depending on the aspect ratio of the graphite particles. We also demonstrate that external energy input from hydrodynamic drag created by fluid motion or sonication, further reduces the size of the graphene oxide sheets through tensile stress buildup in the sheets.

Sandwich-type functionalized graphene sheet-sulfur nanocomposite for rechargeable lithium batteries.

A functionalized graphene sheet-sulfur (FGSS) nanocomposite was synthesized as the cathode material for lithium-sulfur batteries. The structure has a layer of functionalized graphene sheets/stacks (FGS) and a layer of sulfur nanoparticles creating a three-dimensional sandwich-type architecture. This unique FGSS nanoscale layered composite has a high loading (70 wt%) of active material (S), a high tap density of ∼0.92 g cm(-3), and a reversible capacity of ∼505 mAh g(-1) (∼464 mAh cm(-3)) at a current density of 1680 mA g(-1) (1C). When coated with a thin layer of cation exchange Nafion film, the migration of dissolved polysulfide anions from the FGSS nanocomposite was effectively reduced, leading to a good cycling stability of 75% capacity retention over 100 cycles. This sandwich-structured composite conceptually provides a new strategy for designing electrodes in energy storage applications.