A Ten-Minute Synthesis of α-Ni(OH)2 Nanoflakes Assisted by Microwave on Flexible Stainless-Steel for Energy Storage Devices.

Although numerous methods have been widely used to prepare nickel hydroxide materials, there is still a demand for lowering the required heating time, temperature, and cost with maintaining a high-quality nanomaterial for electrochemical energy storage. In this research, we study the relationship between microwave-assisted heating parameters and material properties of nickel hydroxide nanoflakes and evaluate their effect on electrochemical performance. X-ray diffraction spectra show that the samples prepared at the highest temperature of 220 °C have crystallized in the beta phase of nickel hydroxide crystal. While the sample synthesized at 150 °C in 30 min contains both beta and alpha phases. Interestingly, we obtained the pure alpha phase at 150 °C in just 10 min. A scanning electron microscope shows that increasing the temperature and heating time leads to enlarging the diameter of the macro-porous flower-like clusters of interconnected nanoflakes. Electrochemical measurements in potassium hydroxide electrolytes demonstrate that the alpha phase's electrodes have much higher capacities than samples containing only the beta phase. The maximum areal capacity of 17.7 µAh/cm2 and gravimetric capacity of 35.4 mAh/g are achieved, respectively, at 0.2 mA/cm2 and 0.4 A/g, with a small equivalent series resistance value of 0.887 ohms on flexible stainless-steel mesh as a current collector. These improved nickel hydroxide electrodes can be ascribed to utilizing the diffusion-controlled redox reactions that are detected up to the high scan of 100 mV/s. Such fast charge-discharge processes expand the range of potential applications. Our nickel hydroxide electrode, with its rapid preparation at medium temperature, can be a cost-effective candidate for flexible supercapacitors and batteries.

Zein based magnesium oxide nanoparticles: Assessment of antimicrobial activity for dental implications.

MgO nanoparticles have been recently discovered as an antibacterial, however, they limited by property degradation due to agglomeration. The addition of a coating agent, such as a zein polymer, is effective in preventing agglomeration without affecting nanosized properties. The aim of this study was to assess the antimicrobial property of MgO nanoparticles when coated with a zein polymer against several oral bacteria and fungi. This was done by utilizing various assessment techniques. The ultimate aim is to use these nanoparticles in dental preparations. The antimicrobial activity of zein-coated MgO nanoparticles at different concentrations of 0.5, 1 and 2% were tested against four different microorganisms: Staphylococcus aureus, Streptococcus mutans and Enterococcus faecalis (gram positive bacteria), and Candida albicans (as oral fungus). Two different techniques were utilized: the Kirby-Bauer test, and a modified direct contact test. The results indicated that the antibacterial effect of 1% or 2% zein-coated MgO nanowires were statistically significant (p<0.05) against the four organisms studied: S. mutans, S. aureus, E. faecalis and C. albicans. Zein-coated MgO nanoparticles are a new human friendly and potent antimicrobial agent that can be incorporated in the formulation of a variety of new dental materials and products that should provide improvements in dental care and oral health.

A Bioactive Carbon Nanotube-Based Ink for Printing 2D and 3D Flexible Electronics.

The development of electrically conductive carbon nanotube-based inks is reported. Using these inks, 2D and 3D structures are printed on various flexible substrates such as paper, hydrogels, and elastomers. The printed patterns have mechanical and electrical properties that make them beneficial for various biological applications.

Hydrogels 2.0: improved properties with nanomaterial composites for biomedical applications.

The incorporation of nanomaterials in hydrogels (hydrated networks of crosslinked polymers) has emerged as a useful method for generating biomaterials with tailored functionality. With the available engineering approaches it is becoming much easier to fabricate nanocomposite hydrogels that display improved performance across an array of electrical, mechanical, and biological properties. In this review, we discuss the fundamental aspects of these materials as well as recent developments that have enabled their application. Specifically, we highlight synthesis and fabrication, and the choice of nanomaterials for multifunctionality as ways to overcome current material property limitations. In addition, we review the use of nanocomposite hydrogels within the framework of biomedical and pharmaceutical disciplines.

Novel rapid synthesis of zinc oxide nanotubes via hydrothermal technique and antibacterial properties.

ZnO nanotubes with the wurtzite structure have been successfully synthesized via simple hydrothermal solution route using zinc nitrate, urea and KOH for the first time. The structural, compositions and morphology architectures of the as synthesized ZnO nanotubes was performed using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), field emission scanning electron microscopy (FESEM), energy dispersive X-ray spectroscopy (EDS) and high resolution transmission scanning electron microscopy (HRTEM). TEM showed that ZnO nanotubes exhibited a wall thickness of less than 2 nm, with an average diameter of 17 nm and the length is 2 µm. In addition, the antibacterial activity of ZnO nanotubes was carried out in vitro against two kinds of bacteria: gram - negative bacteria (G -ve) i.e. Escherichia coli (E. coli) and gram - positive bacteria (G +ve) i.e. Staphylococcus aureus. Therefore, this work demonstrates that simply synthesized ZnO nanotubes have excellent potencies, being ideal antibacterial agents for many biomedical applications.

Myotube formation on gelatin nanofibers - multi-walled carbon nanotubes hybrid scaffolds.

Engineering functional muscle tissue requires the formation of densely packed, aligned, and mature myotubes. To enhance the formation of aligned myotubes with improved contractibility, we fabricated aligned electrospun gelatin multi-walled carbon nanotubes (MWNTs) hybrid fibers that were used as scaffolds for the growth of myoblasts (C2C12). The MWNTs significantly enhanced myotube formation by improving the mechanical properties of the resulting fibers and upregulated the activation of mechanotransduction related genes. In addition, the fibers enhanced the maturation of the myotubes and the amplitude of the myotube contractions under electrical stimulation (ES). Such hybrid material scaffolds may be useful to direct skeletal muscle cellular organization, improve cellular functionality and tissue formation.

Development of Fe/Fe3O4 core-shell nanocubes as a promising magnetic resonance imaging contrast agent.

Here, we report the synthesis, characterization, and properties of Fe/Fe3O4 core-shell nanocubes prepared via a simple route. It includes NaBH4 reduction of FeCl3 in an ethylene glycol solution in the presence of 2-mercaptopropionic acid (surfactant) and trisodium citrate (cosurfactant) followed by surface oxidation with trimethylamine N-oxide. The morphology and structure of Fe/Fe3O4 core-shell nanocubes were characterized using transmission electron microscopy (TEM), high-resolution TEM, selected area electron diffraction, X-ray powder diffraction, and X-ray photoelectron spectroscopy. All of the methods confirm a Fe/Fe3O4 core-shell structure of nanocubes. Magnetic measurements revealed that the Fe/Fe3O4 core/shell nanocubes are superparamagnetic at 300 K with a saturation magnetization of 129 emu/g. The T2 weighted imaging and the T2 relaxation time showed high MRI contrast and sensitivity, making these nanocubes viable candidates as enhanced MRI contrast agents.

A new large - Scale synthesis of magnesium oxide nanowires: Structural and antibacterial properties.

Large-scale one-dimensional magnesium oxide (MgO) nanowires with diameters of 6 nm and lengths of 10 µm have been successfully synthesized by a new facile and simple reaction. This production was performed via a microwave hydrothermal approach at low temperature growth of 180 °C for 30 min. The structure of as synthesized MgO nanowires were investigated by means of X-ray diffraction (X-ray), Fourier Transformation Infrared Spectroscopy (FTIR), Field Emission Scanning Electron Microscopy (FE-SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED) and Energy Dispersive X-ray (EDS). The antibacterial behavior of MgO nanowires concentration in solid media against Gram negative and Gram positive for different bacteria has been tested in details. The results show that the MgO nanowires have bacteriostatic activity against Escherichia coli and Bacillus sp. The antibacterial activity increases with increasing MgO nanowires concentration. Furthermore, the presence of one-dimensional MgO nanowires has high antibacterial efficacy and damages the membrane wall of bacteria. Finally, this study offered the prospect of developing ultrafine nanoscale devices utilizing MgO nanowires and implementing their useful potential in biological control.