Impact of Access Cavity Design on Fracture Resistance of Endodontically Treated Maxillary First Premolar: In Vitro.

This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.

Precision-milled simulated curved root canals in bovine dentine for the assessment of chemo-mechanical root canal preparation.

AIM: The aim was to develop a standardized curved root canal model in bovine dentine and to assess whether that natural substrate would behave differently from the resin in standard plastic training blocks when prepared chemo-mechanically. The impact of substrate microhardness on simulated canal transportation was considered. METHODOLOGY: High-precision computer numerical control (CNC) milling was used to recreate a simulated root canal from a resin training block (Endo Training Bloc J-Shape, size 15) in longitudinally sectioned, dis- and re-assembled bovine incisor roots. Optical overlays obtained from 10 resin blocks were used to identify an average canal and program the CNC milling apparatus accordingly. Resin and dentine microhardness were measured. Simulated root canals in resin training blocks and their bovine counterparts were then instrumented at 37°C using Reciproc R25 instruments (VDW) with water or 17% EDTA (n = 10). Open-access image processing software was used to superimpose and analyse pre- and postoperative images obtained with a digital microscope. Centering ratios were averaged to indicate canal transportation. The effects of substrate and irrigant on canal transportation were assessed by two-way anova. RESULTS: Superimposed images showed that resin blocks under investigation varied considerably in terms of simulated canal length and curvature, whilst the milled canals were highly similar. The microhardness of dentine was more than three times higher than that of the resin. Conversely, canal transportation was considerably greater in dentine compared to resin, and in dentine had a tendency to be increased by EDTA. There was a strong effect of substrate on canal transportation (p < .001), no overall effect of irrigant, and a marginally significant interaction between irrigant and substrate (p = .077). CONCLUSIONS: CNC milling allows to create standardized simulated curved root canals in bovine dentine. These models may be useful to test and compare materials and concepts of chemo-mechanical root canal instrumentation. Microhardness is a bulk feature that does not predict the response to chemo-mechanical instrumentation of a composite material such as dentine.

Impact of Access Cavity Design on Fracture Resistance of Endodontically Treated Maxillary First Premolar: In Vitro

Abstract This study was designed to investigate the impact of access cavity designs on fracture resistance of endodontically treated maxillary first premolars. The study sample consisted of 72 intact maxillary first premolars, randomly divided into six groups (n = 12). A standardized proximal cavity preparation was prepared for all samples using standard bur. Groups I: control group with only standard proximal cavity and no endodontic access, group II: Truss access cavity, group III: Separated access to buccal and palatal canals without removal of dentine in between, group IV: Access to buccal and palatal canals with removal of dentine in between, group V: Traditional access cavity, group VI: Mesio-occlusal-distal cavity (MOD). For groups I and VI, only composite restoration was used to restore the proximal cavity, while for groups II- V, the access was prepared and endodontic treatment was performed on all teeth, then composite restoration was placed. The root canals were instrumented using nickel-titanium files, irrigated with sodium hypochlorite, and filled with AH plus sealer and gutta-percha using warm vertical condensation. All samples were then placed in an acrylic mold and underwent thermal aging for 10,000 cycles between 5 and 55°C. The samples were fixed in a universal testing machine with the long axis of the roots positioned at 20° to a load applied at a crosshead speed of 1 mm/min using a stainless steel semi-spherical indenter (Ø = 3 mm) until fracture occurred to determine the fracture resistance force in Newton. The normality test (Shapiro-Wilk) showed that data are normally distributed. Group II exhibited the highest mean fracture resistance, and group VI was the least likely to resist the fracture. No statistically significant differences between tested groups (p-value = 0.237). The MOD group showed a more unfavorable mode of fracture compared to other groups. No significant difference in fracture resistance between conservative and traditional access cavities. The missing marginal ridges, such as in MOD cavities played an important role in decreasing the fracture resistance of endodontically treated teeth.

Resumo O objetivo deste estudo foi investigar o impacto do design da cavidade de acesso na resistência à fratura de primeiros pré-molares superiores tratados endodonticamente. MÉTODOS: A amostra do estudo consistiu em 72 primeiros pré-molares superiores intactos, divididos aleatoriamente em seis grupos (n = 12). Um preparo padronizado da cavidade proximal foi realizado para todas as amostras usando broca padrão. Grupos I: grupo de controle com apenas cavidade proximal padrão e sem acesso endodôntico, grupo II: cavidade de acesso Truss, grupo III: acesso separado aos canais vestibular e palatino sem remoção de dentina entre eles, grupo IV: acesso aos canais vestibular e palatino com remoção de dentina entre eles, grupo V: cavidade de acesso tradicional, grupo VI: cavidade mesio-oclusal-distal (MOD). Para os grupos I e VI, apenas a restauração de compósito foi usada para restaurar a cavidade proximal. Já nos grupos II e V, o acesso foi preparado e o tratamento endodôntico foi realizado em todos os dentes e, em seguida, foi colocada a restauração de resina composta. Os canais radiculares foram instrumentados com limas de níquel-titânio, irrigados com hipoclorito de sódio e preenchidos com AH plus sealer e guta-percha usando condensação vertical quente. Todas as amostras foram então colocadas em molde de acrílico e submetidas a envelhecimento térmico por 10.000 ciclos entre 5 e 55°C. As amostras foram fixadas em uma máquina de teste universal com o eixo longo das raízes posicionado a 20° para uma carga aplicada a uma velocidade de cruzeta de 1 mm/min usando indentador semiesférico de aço inoxidável (Ø = 3 mm) até que ocorresse a fratura para determinar a força de resistência à fratura em Newton. RESULTADOS: O teste de normalidade (Shapiro-Wilk) mostrou que os dados são normalmente distribuídos. O grupo II apresentou a maior resistência média à fratura, e o grupo VI foi o menos propenso a resistir à fratura. Não houve diferenças estatisticamente significativas entre os grupos testados (p-valor = 0,237). O grupo MOD apresentou um modo de fratura mais desfavorável em comparação com os outros grupos. CONCLUSÕES: Não houve diferença significativa na resistência à fratura entre as cavidades de acesso conservador e tradicional. A ausência de cristas marginais, como nas cavidades MOD, desempenhou um papel importante na diminuição da resistência à fratura dos dentes tratados endodonticamente.

Synthesis and characterisation of gold nanoparticles from acacia leaf and to evaluate anticariogenic activity.

Objective: To synthesise the gold nanoparticles (AuNPs) using Acacia catechu through biogenic synthesis and evaluate their antimicrobial efficacy against S. mutans and E. coli in vitro. Methods: Green synthesised AuNPs were characterised using the ultraviolet-visible (UV-Vis) spectroscopy, and the size and shape of the synthesised nanoparticles were evaluated using the transmission electron microscopy (TEM). The antimicrobial efficacy of AuNPs (30/60/100 µl) against S. mutans/E. coli was evaluated on the Mueller-Hinton agar by measuring the zone of inhibition (ZOI) with ampicillin (15 µl) as a positive control. Results: The synthesised AuNPs were confirmed using the UV-Vis spectroscopy with peaks at 540 nm, and the size of the particle estimated using the TEM was between 5 and 15 nm. The antimicrobial efficacy of AuNPs was comparable to that of ampicillin against S. mutans/E. coli, but the difference was not significant. The antimicrobial effects increased in a dose-dependent fashion but were comparable across all concentrations and ampicillin. Conclusion: Green synthesised AuNPs exhibited significant antibacterial activity against S. mutans and E. coli at par with commercial ampicillin and demonstrated the potential towards anticariogenic agent for future use in dentistry.

Antimicrobial Properties and Substantivity of Gentamicin, Amoxicillin and Metronidazole (GAM) Antibiotic Solution with Chitosan as a Root Canal Irrigant - A Preliminary Study.

Irrigation is one of the steps that is very crucial in a high-quality endodontic treatment. Hence, irrigant with good substantivity is essential which must not only be effective for the dissolution of the organic tissues but also effectively eliminate bacterial contamination. The aim of the study was to investigate and compare the antimicrobial efficacy of gentamicin, amoxicillin, and metronidazole (GAM) antibiotic solution, chitosan and their combination (GAMC), and analyze their sustained release property. Mueller-Hinton agar medium was inoculated with E. faecalis. The medicaments were then poured at the center of the plate in the prepared wells and incubated at 37°C. Antibacterial property of each medicament was evaluated by measuring the diameter of the zone of inhibition at the end of 48 hours. The substantivity of GAM antibiotic solution and the GAMC was checked using an ultraviolet spectrophotometer. The GAMC demonstrated the strongest antimicrobial activity and good sustained-release properties. Distilled water showed no activity, and chlorhexidine acted as the positive control. Conclusion: The combination of gentamicin, amoxicillin, and metronidazole (GAM) solution with chitosan (GAMC) can be used as an alternative intracanal irrigant as it was found to be a potent antibacterial agent.

Assessment of Irrigant Agitation Devices in Simulated Closed and Open Root Canal Systems.

INTRODUCTION: The in vitro efficacy of irrigant activation devices has not been contrasted to their safety. This was attempted in this study using apically closed versus patent simulated root canal systems in epoxy resin models, with the latter featuring a simulated periapical lesion. METHODS: All 72 models had 2 joining canals connected by an isthmus, which was filled with dentin debris. The simulated periapical lesion was filled with colored gelatin in the 36 respective models. Canals were irrigated with 1.3% sodium hypochlorite. Samples were divided into 4 subgroups per system (n = 9): conventional irrigation, sonic low (EndoActivator; Dentsply Sirona, Charlotte, NC) and high frequency (EDDY; VDW, Munich, Germany), and ultrasonic agitation of the irrigant (always applying 3 cycles of 20 seconds). The total cleared surface areas (mm2) in the simulated isthmus and periapical lesion were compared between systems and devices using parametric tests (P < .05). RESULTS: The cleaning of the isthmus was more effective in the apically open compared with the closed systems and was also significantly influenced by the agitation method (P < .001). In the closed systems, EDDY and ultrasonic agitation achieved the significantly (P < .05) best cleaning of the isthmus. In the open systems, ultrasonic agitation showed the single best result (P < .05). EDDY caused by far the highest and ultrasonic agitation the lowest dissolution of the gelatin in the simulated periapical lesion. CONCLUSIONS: Under the conditions of this study, ultrasonic agitation of a previously administered sodium hypochlorite irrigant was more laterally targeted and thus safer and more effective than sonic agitation methods.

Influence of the internal anatomy on the leakage of root canals filled with thermoplastic technique.

OBJECTIVES: The aim of this paper is to evaluate the influence of the internal anatomy on the leakage of root canals filled with the thermoplastic technique. MATERIALS AND METHODS: The upper central incisors (UCI) and mesial roots of the lower molars (MRLM) (n = 12 each) were tested regarding leakage using the gas-enhanced permeation test (GEPT) after root filling. The quality of the root fillings was assessed using micro-computed tomography (µCT) by superimposing scans before and after treatment to calculate unfilled volume. The calculated void volume was compared between the groups and correlated to the measured leakage values. Data were analyzed using t test and Pearson's correlation tests (p < 0.05). RESULTS: The mean void volume did not differ between UCI and MRLM (13.7 ± 6.2% vs. 14.2 ± 6.8%, respectively). However, significantly more leakage was evident in the MRLM (p < 0.001). While the leakage correlated highly to the void volume in the MRLM group (R 2 = 0.981, p < 0.001), no correlation was found in UCI (R 2 = 0.467, p = 0.126). CONCLUSION: MRLM showed higher leakage values, which correlated to the void volume in the root canal fillings. CLINICAL RELEVANCE: Care should always be taken while doing root canal treatments, but attention to teeth with known/expected complex root canal anatomy should be considered.

Evaluation of a novel repetitive gas-enhanced permeation test for restoration leakage determination after thermo-mechanical loading.

OBJECTIVES: To assess leakage of class-I restorations using a gas-enhanced permeation test (GEPT) as compared with conventional SEM or dye analysis. MATERIALS AND METHODS: Pressure differences over time and penetrating water volumes were measured simultaneously in a two-chamber system (GEPT) before and after class I cavity preparation in 30 molars. Ten teeth were restored with a composite restoration without bonding (A1), a composite restoration with bonding (A2) or a ceramic indirect restoration (B). Five intact teeth served as controls (C). Another GEPT measurement was performed and impressions were taken. Teeth were subjected to thermodynamic loading (1 200 000 cycles) and final GEPT measurements and impressions were made. SEM evaluation of the marginal continuity was performed and teeth were subjected to a Fuchsin dye penetration test. Spearman's rank test was used to compare results from different tests. RESULTS: The GEPT and SEM values did not correlate before loading (0.359, p = 0.051), but significantly correlated afterwards (0.662, p < 0.0001). The correlations between the Fuchsin dye penetration test and GEPT and SEM surface marginal analysis were significant (0.777 and 0.534, p-values < 0.0001 and 0.002, respectively). CONCLUSIONS: SEM marginal analysis was mainly limited in reflecting the surface restoration integrity. GEPT evaluation may, therefore, serve as a tool to non-destructively assess restoration sub-surface integrity over time. CLINICAL RELEVANCE: The current study provided proof that restoration margin quality does not necessarily reflect its leakage behaviour.

Impact of Dynamic Loading on the Implant-abutment Interface Using a Gas-enhanced Permeation Test In Vitro.

PURPOSE: To assess implant leakage under static conditions as well as during and after dynamic loading. Materials and methods : Implants (Astra Tech (A), Biomet 3i (B) and Nobel Biocare (C)) were evaluated for leakage (n=8/group). Testing to assess the gas pressure change over time (hPa/min) and infiltrated fluid volume, was performed in a Gas Enhanced Permeation Test (GEPT) to qualify embedding. Implant apexes were then drilled, abutments were mounted and resin build-ups were fabricated. GEPT was reassessed. Samples were afterward mounted in a computer-controlled masticator while tested to bacterial leakage, they were daily observed for turbidity. Samples were then reassessed using GEPT. Dunnett's and Fisher's exact tests were utilized to compare implant and to analyze bacterial leakage. Results : Significant differences in GEPT values were shown after loading (p=0.034). Leakage resistance was best for B when compared to C (p=0.023). Samples with higher GEPT values demonstrated earlier bacterial leakage, occurring after 1 or 2 days (A=4, B=0, C=6) and showing favorability for implant system B (p=0.009). Conclusion : Implants leaking under static conditions had increased potential for bacterial leakage under dynamic conditions. As strongly correlating to sophisticated analytical methods, GEPT is a promising technique for assessing the overall implant system leakage resistance.

Comparison of three in vitro implant leakage testing methods.

AIMS: To assess the accuracy and sensitivity in detecting implants leakage with a gas-enhanced permeation test (GEPT) and to compare with a molecular- and a bacterial-based leakage tests. MATERIALS AND METHODS: Three implants systems were tested (n = 20 per group): Nobel Biocare (NB), Astra Tech (AT) and Biomet 3i (B3i). Implants were mounted in PVC disks and were first tested for gas pressure change and infiltrated saline volume over 40 min. The same implants were then subjected to a molecular leakage evaluation using fluorescent Dextran for 28 days. After cleaning and sterilization, bacterial permeation (E. faecalis) was evaluated by selective media turbidity for another 28 days. Slopes in the pressure change and the perfused saline rate were used as a measure of leakage in the GEPT model and the times of positive events, that is, color change, after molecular and bacterial tests were recorded. Data were analyzed using Kolmogorov-Smirnov/Shapiro-Wilk, Kruskal-Wallis H and Spearman's Rho tests (P < 0.05). RESULTS: The gas and saline (ml) leakage values accounted for 0.85 ± 0.71 and 0.56 ± 0.50 ml (AT), 0.23 ± 0.030 and 0.12 ± 0.20 ml (NB) and 0.01 ± 0.01 and 0 ± 0 ml (B3i), respectively, and were significantly different from each other (P < 0.001). Slope in the pressure change over time showed a significant positive correlation with the collected saline solution (r = 0.91; P < 0.001). Molecular and bacterial leakage was positive at the same implants, which also showed increased leakage values in the GEPT setup. The development of positive events in the timeline of the bacterial leakage evaluation corresponded well to the GEPT leakage model. CONCLUSION: The GEPT proved to be a reliable method to quantify leakage. The B3i showed the best sealing among the tested systems.

Three root canals in the mesiobuccal root of maxillary molars: case reports and literature review.

INTRODUCTION: The knowledge of root canal anatomy is essential to ensure a successful outcome of surgical and nonsurgical root canal treatment. The aims of this article were to present 2 cases of maxillary molars with 3 mesiobuccal root canals and to review the available literature on this anatomic variation. METHODS: The first case described a nonsurgical root canal treatment of tooth #16 in a 29-year-old man with the aid of a dental operating microscope. In the second case, an extracted maxillary right first molar was scanned by a micro-computed tomographic system and reconstructed 3-dimensionally using modeling software. RESULTS: In both cases, the mesiobuccal root had 3 canals (type 3-2 in case I and type 3-3 in case II), whereas the distobuccal and palatal roots had a single canal. The literature review showed that the overall incidence of 3-canaled mesiobuccal roots in maxillary molars ranged from 1.3%-2.4% and that the most common root canal configuration was type 3-2. CONCLUSIONS: Clinicians should always anticipate the presence of extra canals in maxillary molars and use all the available tools to locate and treat these.

Laboratory validation of a new gas-enhanced dentine liquid permeation evaluation system.

AIM: To validate a new automated dentine permeability testing platform based on pressure change measurements. METHODOLOGY: A split chamber was designed allowing for concomitant measurement of fluid permeation and pressure difference. In a first test, system reliability was assessed by interposing a solid metal disk, embedded composite resin disks, or teeth by consecutively measuring eight times under standardized conditions. Secondly, the repeatability and applicability of the method was tested in a dentine wound model by using intact third molars: Class I (2 × 5 mm) and a full occlusal preparation as well a ceramic restoration were consecutively performed and repeatedly measured eight times each. In the last test, the system detection limit as well correlation between gas pressure difference and liquid permeation were evaluated: Again, third molars were used and occlusal preparations of increasing size (2 × 5, 3 × 5, 4 × 5, and 5 × 5 mm and full occlusal preparations, respectively) were made. Data was analyzed for the linearity of measurement, and R (2) values were calculated. RESULTS: The embedding procedure allowed for perfect separation of the two chambers, and no significant variation in repeated measurements of evaluated samples for the respective treatments (p = 0.05) was found. The detection was 0.002 hPa/min for the pressure slope and 0.0225 µl/min for the fluid infiltration, respectively. The saline volume was highly correlating to the gas pressure changes (R (2) = 0.996, p < 0.0001). CONCLUSIONS: The presented method is a reliable and exact tool to assess dentine permeability by nondestructive and repeatable measurements. CLINICAL RELEVANCE: This method is suitable for measurements and comparison of the effectiveness of dentine wounds sealing materials.

Acoustic hypochlorite activation in simulated curved canals.

INTRODUCTION: It was the goal of this study to compare different NaOCl activation schemes regarding a desired and an untoward outcome. Ultrasonic tips and a currently marketed sonic system were used in conjunction with a 2.5% sodium hypochlorite solution. Necrotic pulp tissue dissolution in simulated accessory canals and transportation of the main canal were assessed. METHODS: Epoxy resin models (10 per group) with a curved simulated main root canal and two simulated accessory canals filled with necrotic bovine pulp tissue were irrigated passively with one of three ultrasonic setups (straight stainless steel files, prebent stainless steel files, or nickel-titanium tips) or a sonic device in conjunction with a plastic tip. Activation was performed four times for 30 seconds with replenishment of the NaOCl solution in between. All the files/tips had a 2% taper and a 0.15-mm tip diameter according to the manufacturer. Data from superimposing and analyzing digital photos before and after treatment were statistically analyzed using one-way analysis of variance followed by Bonferroni's correction for multiple comparisons (alpha < 0.05). RESULTS: Passive ultrasonic irrigation (PUI) in all the groups dissolved significantly more tissue than sonic activation (p < 0.05). No detectable canal transportation with sonic activation was observed. The difference in this outcome was not significant compared with ultrasonically activated nickel-titanium tips, whereas the straight stainless steel files caused significantly more ledging compared with these setups (p < 0.05). CONCLUSION: Under the current conditions, PUI with a nickel-titanium tip promoted superior tissue-dissolving effects over sonic irrigant activation while maintaining simulated canal anatomy.