The efficacy of iatrosedation and music listening techniques in attenuating dental anxiety in patients undergoing dental crown preparation: A randomized clinical trial.

Dental anxiety is a common problem encountered in dental clinics that affects both patients and dentists. Adequate management of dental anxiety is critical for optimal treatment outcomes for the patient. This study aims to assess the efficacy of two anxiety-reduction techniques (iatrosedation and music listening) for dental crown preparation in adult patients. In this clinical trial, 60 patients were randomly assigned to three groups: Group 1, iatrosedation; Group 2, music listening; and Group 3, control. Patients in all three groups underwent dental crown preparation. To measure the anxiety levels of the patients, heart rate was calculated using a pulse oximeter, and verbal rating scale scores were assessed. One-way analysis of variance, post hoc analysis, and Spearman's correlation were used to compare the mean values of the three groups. Significant differences were observed in the heart rate and verbal rating scale scores among individuals in the study groups. A more substantial reduction in anxiety levels was found in patients exposed to iatrosedation (Group 1), which was followed by music listening (Group 2). Recorded heart rate and verbal rating scores were the highest in the control group patients. The iatrosedation technique significantly reduced dental anxiety for patients undergoing dental crown treatment; however, music listening was less effective than iatrosedation. Educating patients regarding the dental care they are about to receive is vital for reducing their anxiety.

Modified photoactivated methylene blue-incorporated quartz particles for dentin disinfection: A scanning electron microscope and spectroscopic analysis.

The aim of this study was to synthesize methylene blue-incorporated quartz particles (MB@QP) and to investigate its anti-bactericidal properties. Methylene blue was incorporated inside QP and characterized for morphology and chemical structure using scanning electron microscope (SEM) and Fourier transformed infrared spectroscopy (FTIR). Specimens were randomly divided into experimental and control groups (n = 9/groups). The dentin specimen infected with Enterococcus faecalis was treated using different treatment modalities: Control groups: treatment with 5.25% of sodium hypochlorite (NaOCl) for 60 s; MB: treatment with 1 ml MB solution and incubated for 60 s; MB-PDT (photodynamic therapy): treatment with 1 ml MB solution followed by irradiation using diode laser for 60 s; MB-QP-PDT: specimens treated with MB@QP and irradiated by the diode laser for 60s, and Er,Cr:YSGG laser alone. MB@PDT therapy showed the highest efficacy in reducing the survival rate of E. faecalis (0.49%) in comparison to control NaOCl (0.78%) and Er,Cr:YSGG laser treatment (2.17%). Encapsulating MB into QP followed by the PDT significantly improved the bactericidal capacity and significantly reduced the bacterial survival rate to 0.11% (p < .05) compared to other groups. The combination of MB incorporated into QP and PDT could be an alternative treatment modality to conventional disinfection method for eliminating bacteria from the tooth dentin. RESEARCH HIGHLIGHTS: Quartz particles are potent in delivering the photosensitizer. Photoactivated MB@QP has a higher efficacy in eliminating bacteria from tooth dentin.

Corrosion resistance of coupled sandblasted, large-grit, acid-etched (SLA) and anodized Ti implant surfaces in synthetic saliva.

Purpose: The purpose of this study was to investigate the corrosion resistance of galvanically coupled SLA and anodized implant surfaces with a Co-Cr alloy. Materials and Methods: Three groups were included in this study. The first (SLA) was composed of SLA implants (Institut Straumann, Basel, Switzerland), the second (ANO) of NobelReplace® (Nobel Biocare, Göteborg, Sweden), and the third (MIX) of both implant systems combined. All groups were assembled with a single Co-Cr superstructure. Electrochemical testing included open-circuit potential, electrochemical impedance spectroscopy, cyclic potentiodynamic polarization, and chronoamperometric current-time measurements. The quantitative results (EOCP, ECORR, ICORR, EPROT, RP, and ICA) were statistically analyzed by one-way ANOVA and Tukey's post-hoc multiple comparison test (α = 0.05). Results: All the aforementioned parameters showed statistically significant differences apart from ECORR and EPROT. The evaluation of qualitative and quantitative results showed that although SLA had higher corrosion resistance compared with ANO, it had less resistance to pitting corrosion. This means that SLA showed increased resistance to uniform corrosion but less resistance if pitting corrosion was initiated. In all cases, MIX showed intermediate behavior. Conclusion: The corrosion resistance of implant-retained superstructures is dependent on the electrochemical properties of the implants involved, and thus different degrees of intraoral corrosion resistance among different implant systems are anticipated.

Effect of Erbium-yttrium, scandium, gallium and garnet (Er-YSGG) laser on the bond strength of lithium disilicate ceramics.

OBJECTIVES: To assess the bond strength of LD ceramics with resin composite material and surface conditioning using Er: YSGG laser and HF acid. METHODS: Thirty LD ceramic (Emax, Ivoclar vivadent) discs were prepared using hot pressing technique and treated with hydroflouric acid (Group-1-HF acid) (9%) (n=10) and Er- yttrium, scandium, gallium and garnet laser (Group-2-ER-YSGG laser) (Waterlase iPlus, 10 Hz and power of 0.5 W, pulse duration of 230 µs) (n=10). Ten specimens were left untreated to be included as controls (Group-3-Control). All the specimens were treated with Adper Single Bond adhesive (3MESPE, St. Paul, MN, USA). Multicore buildups (3mmx3mm) were performed using a rubber mold on the ceramic surfaces and cured using LED light-curing unit for 140 sec. All specimens were tested using shear bond test and failure modes were assessed with a stereomicroscope and scanning electron microscope. Data was analysed using ANOVA and Tukey Kramer multiple comparisons test. RESULTS: The maximum and minimum shear bond strength values were achieved in HF Acid specimens (Group-1) (28.15±4.72 MPa) and control specimens (13.47± 3.14 MPa) respectively. Specimens treated with HF acid showed significantly higher bond strength in comparison to laser treated and control specimens (p<0.01). Laser treated specimens had significantly higher bond strength as compared to controls (p<0.01). CONCLUSIONS: Hydrofluoric (HF) acid treatment showed significantly better outcomes than YSGG laser surface treatment.

Effectiveness of adjunctive antimicrobial photodynamic therapy in reducing peri-implant inflammatory response in individuals vaping electronic cigarettes: A randomized controlled clinical trial.

BACKGROUND: There are no studies that have assessed the effectiveness of antimicrobial photodynamic therapy (aPDT) in reducing peri-implant inflammatory response in individuals vaping electronic cigarettes (e-cigs). This study explored the effectiveness of aPDT as an adjunct to mechanical debridement (MD) in the treatment of peri-implant mucositis (p-iM) in individuals vaping e-cigs. METHODS: Vaping individuals with p-iM were divided into 2 groups: (a) Group-I: receiving MD with aPDT (test group); and (b) Group-II: MD only (control group). Peri-implant inflammatory parameters including plaque index (PI), bleeding on probing (BoP), and pocket depth (PD) were assessed at baseline and 12-weeks follow-up. Inter- and intra-group comparisons were made using Mann-Whitney U test and Wilcoxon signed ranks test. P-value < 0.05 was considered significant. RESULTS: Thirty-eight male patients (20 in Group-I and 18 in Group-II) were included. The mean age of vaping individuals in groups I and II were 33.6 ±â€¯2.8 and 35.4 ±â€¯2.1 years, respectively. Mean daily frequency of vaping e-cigs in groups I and II was 7.3 ±â€¯0.9 and 5.9 ±â€¯1.0 whereas mean duration of vaping e-cigs was 4.8 ±â€¯1.5 and 4.1 ±â€¯1.3 years respectively. There was no significant difference between groups at baseline. There was significant improvement in PI (p < 0.001) and PD (p < 0.001) at 12-weeks follow-up with respect to the baseline visit in both groups. There was a significant reduction in PI (p < 0.001) and PD (p < 0.001) for group-I as compared to group-II at follow-up. There was no statistically significant difference for BoP between groups at follow-up. CONCLUSION: Antimicrobial PDT is more effective compared to MD alone in the treatment of p-iM in individuals vaping e-cigs. The findings of the present study should be considered preliminary and interpreted with caution. Further randomized clinical trials should be performed in order to obtain strong conclusions.

Effects of surface treatment and artificial aging on the shear bond strength of orthodontic brackets bonded to four different provisional restorations.

OBJECTIVE: To evaluate the combined effects of material type, surface treatment, and thermocycling on the bond strength of orthodontic brackets to materials used for the fabrication of provisional crowns. MATERIALS AND METHODS: Four materials were included in this study (ProTemp, Trim Plus, Trim II, and Superpont C+B). Sixty cylindrical specimens (1 × 3 cm) were prepared from each material and equally divided into three groups. The first group was ground with silica carbide paper, the second was polished with pumice, and the last group was sandblasted with 50-µm aluminum oxide particles. Stainless-steel maxillary central incisor brackets (Victory Series, 3M) were bonded to the provisional material specimens with Transbond XT light-cured composite resin, and half of the specimens from each group were thermocycled 500 times in 5°C and 55°C water baths. Then the brackets were debonded with shear testing, and the results were statistically analyzed by three-way analysis of variance and Tukey's multiple-comparison tests at α  =  0.05. Adhesive Remnant Index (ARI) was also identified. RESULTS: Before and after thermocycling, ProTemp materials showed the highest shear bond strength with orthodontic brackets (10.3 and 13.1 MPa, respectively). The statistical analysis indicated an interaction among the three independent variables (P < .05) and statistically significant differences in bond strength among provisional materials (P < .001), surface treatments (P < .001), and thermocycling (P < .05). According to the ARI, most groups demonstrated adhesive failure. CONCLUSIONS: The provisional material type, surface treatment, and artificial aging have a significant effect on bond strength. Sandblasting treatment exerts a beneficial effect on shear bond strength.

The effect of mechanical and chemical polishing techniques on the surface roughness of denture base acrylic resins.

UNLABELLED: Smooth polished surface of dental prostheses is important to prevent bacterial colonization and plaque accumulation. The acrylic base of prosthodontic appliances needs to be adjusted by grinding which often alters the surface of the denture base. It is therefore important to know how different polishing techniques affect surface roughness of acrylic resin. OBJECTIVE: The aim of this study was to evaluate the effect of mechanical polishing (MP) and chemical polishing (CP) on the surface roughness of heat cured (HC) and auto cured (AC) denture base acrylic resins. MATERIALS AND METHODS: Sixty acrylic resin specimens (30 × 15 × 3 mm) were made for each of the two types of acrylic resins. Thirty HC specimens received mechanical conventional lathe polishing using cone with pumice slurry and soft brush with chalk powder. The other thirty HC specimens received chemical polishing by immersing in methyl-methacrylate monomer heated to 75 °C ± 1 °C for 10 s. The sixty AC specimens received mechanical and chemical polishing in the same manner. Surface roughness was measured using surface analyzing instrument in microns. The data were statistically analyzed by two-way analysis of variance (ANOVA) followed by post hoc Tukey's test (α = 0.05). RESULTS: THE SURFACE ROUGHNESS MEAN IN MICRONS IN ORDER OF DECREASING VALUES WERE: CP-HC: 1.4132 µm; CP-AC: 1.3494 µm; MP-AC: 0.7364 µm and MP-HC: 0.6333 µm. Two-way ANOVA revealed that the MP-HC was significantly different from CP-HC and CP-AC (P < 0.05). The MP-AC is also significantly different from CP-HC and CP-AC (P < 0.05). There was no significant difference between MP and CP of HC and AC acrylic resin groups. CONCLUSION: It can be concluded that MP produced significantly smoother surfaces than CP. The surface roughness obtained by MP was not influenced by acrylic resin type where as this was not true for CP.