Bifunctional Gas Diffusion Electrode Enables In Situ Separation and Conversion of CO2 to Ethylene from Dilute Stream.

The requirement of concentrated carbon dioxide (CO2 ) feedstock significantly limits the economic feasibility of electrochemical CO2 reduction (eCO2 R) which often involves multiple intermediate processes, including CO2 capture, energy-intensive regeneration, compression, and transportation. Herein, a bifunctional gas diffusion electrode (BGDE) for separation and eCO2 R from a low-concentration CO2 stream is reported. The BGDE is demonstrated for the selective production of ethylene (C2 H4 ) by combining high-density-polyethylene-derived porous carbon (HPC) as a physisorbent with polycrystalline copper as a conversion catalyst. The BGDE shows substantial tolerance to 10 vol% CO2 exhibiting a Faradaic efficiency of ≈45% toward C2 H4 at a current density of 80 mA cm-2 , outperforming previous reports that utilized such partial pressure (PCO2 = 0.1 atm and above) and unaltered polycrystalline copper. Molecular dynamics simulation and mixed gas permeability assessment reveal that such selective performance is ensured by high CO2 uptake of the microporous HPC as well as continuous desorption owing to the molecular diffusion and concentration gradient created by the binary flow of CO2 and nitrogen (CO2 |N2 ) within the sorbent boundary. Based on detailed techno-economic analysis, it is concluded that this in situ process can be economically compelling by precluding the C2 H4 production cost associated with the energy-intensive intermediate steps of the conventional decoupled process.

Single Atom Catalysts for Selective Methane Oxidation to Oxygenates.

Direct conversion of methane (CH4) to C1-2 liquid oxygenates is a captivating approach to lock carbons in transportable value-added chemicals, while reducing global warming. Existing approaches utilizing the transformation of CH4 to liquid fuel via tandemized steam methane reforming and the Fischer-Tropsch synthesis are energy and capital intensive. Chemocatalytic partial oxidation of methane remains challenging due to the negligible electron affinity, poor C-H bond polarizability, and high activation energy barrier. Transition-metal and stoichiometric catalysts utilizing harsh oxidants and reaction conditions perform poorly with randomized product distribution. Paradoxically, the catalysts which are active enough to break C-H also promote overoxidation, resulting in CO2 generation and reduced carbon balance. Developing catalysts which can break C-H bonds of methane to selectively make useful chemicals at mild conditions is vital to commercialization. Single atom catalysts (SACs) with specifically coordinated metal centers on active support have displayed intrigued reactivity and selectivity for methane oxidation. SACs can significantly reduce the activation energy due to induced electrostatic polarization of the C-H bond to facilitate the accelerated reaction rate at the low reaction temperature. The distinct metal-support interaction can stabilize the intermediate and prevent the overoxidation of the reaction products. The present review accounts for recent progress in the field of SACs for the selective oxidation of CH4 to C1-2 oxygenates. The chemical nature of catalytic sites, effects of metal-support interaction, and stabilization of intermediate species on catalysts to minimize overoxidation are thoroughly discussed with a forward-looking perspective to improve the catalytic performance.

Apparent Kinetics of Co-Gasification of Biomass and Vacuum Gas Oil (VGO).

This communication reports the beneficial effects of co-gasification of biomass and residual oil to produce syngas. In this regard, various blends of glucose (a biomass surrogate) to vacuum gas oil (VGO) have been employed to investigate the synergic effects on the gasification process. The non-isothermal co-gasification experiments were conducted in a thermogravimetric analyzer at different heating rates and gasifying agents. The analysis showed that the co-gasification rate increased with the increase of glucose content in the feedstock. The presence of the oxygen in the biomass molecules helped the overall gasification process. The maximum gasification rate of 42.70 wt/min (DTGmax ) was observed with 25 wt% glucose containing sample. The use of gasifying agents appeared to have some influence, especially during high temperature gasification of the glucose-VGO blends. At a same gasification temperature, the co-gasification rate of glucose-VGO blends were found to be 125.7 wt/min and 98.59 wt%/min for N2 and CO2 , respectively. The kinetics of the co-gasification of glucose-VGO blends was conducted based on modified random pore model using TGA experimental data and implemented in MATLAB. The estimated activation energy and rate constants were found to be consistent to the observed co-gasification rates. The apparent activation energies of co-gasification of VGO/biomass blends with different weight percentages shows values ranging 60.56-48.25 kJ/mol. The kinetics analysis suggested that the addition of biomass helped to increase the reaction rate by lowering the activation energy required for accomplishing the reactions compared with petroleum carbonaceous feedstocks. The reaction rate constants isotherms are plotted to show that the k-values are exhibiting similar trends at moderate heating rates between 20 and 60 °C/min. This remark arises due to the nature of the reactions involved which are considered to be inherently similar in this range of heating rate.