Radioactive bone cement for the treatment of spinal metastases: a dosimetric analysis of simulated clinical scenarios.

Vertebral metastases are a common manifestation of many cancers, potentially leading to vertebral collapse and neurological complications. Conventional treatment often involves percutaneous vertebroplasty/kyphoplasty followed by external beam radiation therapy. As a more convenient alternative, we have introduced radioactive bone cement, i.e. bone cement incorporating a radionuclide. In this study, we used a previously developed Monte Carlo radiation transport modeling method to evaluate dose distributions from phosphorus-32 radioactive cement in simulated clinical scenarios. Isodose curves were generally concentric about the surface of bone cement injected into cadaveric vertebrae, indicating that dose distributions are relatively predictable, thus facilitating treatment planning (cement formulation and dosimetry method are patent pending). Model results indicated that a therapeutic dose could be delivered to tumor/bone within ∼4 mm of the cement surface while maintaining a safe dose to radiosensitive tissue beyond this distance. This therapeutic range should be sufficient to treat target volumes within the vertebral body when tumor ablation or other techniques are used to create a cavity into which the radioactive cement can be injected. With further development, treating spinal metastases with radioactive bone cement may become a clinically useful and convenient alternative to the conventional two-step approach of percutaneous strength restoration followed by radiotherapy.

Evaluation of a radiation transport modeling method for radioactive bone cement.

Spinal metastases are a common and serious manifestation of cancer, and are often treated with vertebroplasty/kyphoplasty followed by external beam radiation therapy (EBRT). As an alternative, we have introduced radioactive bone cement, i.e. bone cement incorporated with a radionuclide. In this study, we present a Monte Carlo radiation transport modeling method to calculate dose distributions within vertebrae containing radioactive cement. Model accuracy was evaluated by comparing model-predicted depth-dose curves to those measured experimentally in eight cadaveric vertebrae using radiochromic film. The high-gradient regions of the depth-dose curves differed by radial distances of 0.3-0.9 mm, an improvement over EBRT dosimetry accuracy. The low-gradient regions differed by 0.033-0.055 Gy/h/mCi, which may be important in situations involving prior spinal cord irradiation. Using a more rigorous evaluation of model accuracy, four models predicted the measured dose distribution within the experimental uncertainty, as represented by the 95% confidence interval of the measured log-linear depth-dose curve. The remaining four models required modification to account for marrow lost from the vertebrae during specimen preparation. However, the accuracy of the modified model results indicated that, when this source of uncertainty is accounted for, this modeling method can be used to predict dose distributions in vertebrae containing radioactive cement.

A practical method for the calculation of multileaf collimator shaped fields output factors.

Output factors of multileaf-collimator (MLC) shaped radiation fields were measured for a commercial linear accelerator whose MLC leaves form parts of the upper collimator system. The approach of taking into account the reduced phantom scatter due to the MLC shaping on the output factor has previously been shown to be inadequate for this type of machine because of the effect of the MLC leaves on the collimator factor [Palta et al., Med. Phys. 23, 1219-1224(1996)]. In this article, we present two forms of the collimator factor that give satisfactory agreement with measured values of the output factors of MLC-shaped fields. The present method should be directly applicable to other linacs of similar MLC configuration. For clinical treatment planning, we believe the method is practical and accurate enough to be satisfactory. The equation for calculating the output factor requires only peak scatter and output factors of the machine. These are normally measured during machine commissioning.

Characteristic parameters of 6-21 MeV electron beams from a 21 MeV linear accelerator.

Dosimetry measurements have been carried out for the electron beams produced by a linear accelerator at energies 6, 8, 10, 14, 18, and 21 MeV. Characteristic parameters of the central axis dose distributions were derived and compared to corresponding values of electron beams from other accelerators in clinical use where such a comparison is appropriate. A comprehensive set of dosimetric parameters is provided for electron beam treatment planning. The data include central axis depth dose, range-energy parameters, beam penumbra and uniformity.

Dosimetric aspects of the therapeutic photon beams from a dual-energy linear accelerator.

Parameters of the photon beams (6 and 20 MV) from a dual-energy linear accelerator (Mevatron-KD, Siemens Medical Laboratories, CA) are presented. The depth dose characteristics of the photon beams are dmax of 1.8 and 3.8 cm and percentage depth dose of 68% and 80% at 10-cm depth and 100-cm source-surface distance for a field size of 10 X 10 cm2 for 6 and 20 MV, respectively. The 6 and 20 MV beams were found to correspond to nominal accelerating potentials of 4.7 and 17 MV, respectively. The stability of output is within +/- 1% and flatness and symmetry are within +/- 3%. These figures compare favorably with the manufacturer's specifications.