Assessment of Bacteriological Quality and Physiochemical Parameters of Domestic Water Sources in Jenin Governorate: A Case Study.

Water quality of drinking water is a concern in Palestine due to possible pollution sources. There is a demand for investigating the quality of municipal water supply. This study aimed to assess the quality of domestic water in Jenin Governorate located in the north of the West Bank. The methodology of this research was based on field sampling and laboratory standard testing. The tested parameters included (1) physicochemical parameters of electrical conductivity, turbidity, total hardness, salinity, pH, and total alkalinity, (2) chemical contents including the contents of nitrate, nitrite, sulfate, chloride, sodium, potassium, aluminum, and fluoride, and (3) biological contents including total coliforms and fecal coliforms. The water quality parameters were compared with the acceptable limits set by local and international standards. The findings confirm that most of the values of the investigated parameters are within the acceptable standard limits. No pollution of heavy metals is detectable. On the other hand, there are limited pollution contents in terms of the total dissolved solid (TDS), total hardness, and calcium. Furthermore, the biological parameters indicate that there are low to very high risks in a fraction of the water quality samples in terms of total coliforms and fecal coliforms. This is believed to be due to the presence of septic tanks in the neighborhoods of the sampling locations. For these cases, biological disinfection treatments are recommended before human use with an essential need for the construction of urban sewer systems. Furthermore, water treatment for harness removal may be required.

Wastewater from leather tanning and processing in Palestine: Characterization and management aspects.

Leather manufacturing industry has major environmental impacts. Characterization of tannery's wastewater (WW) is a key step in the management of wastewater released from various processes. This study presents some physicochemical characteristics measured in wastewater. It compares the pollution loads released from both goat and cow hides processing. The main pollution characteristics of wastewater released from two local tanneries were determined experimentally, through analyzing real samples of industrial discharges. These include chemical oxygen demand (COD), total solids (TS), total dissolved solids (TDS), total suspended solids (TSS), pH, and the concentrations of chloride, ammonia (NH3) and chromium in both states, Cr (III) and Cr (VI). Characterization of such processes effluents assists in identifying waste generation rates and discharges, and then in recommending cleaner production options. The results shows that the amount of WW produced in the local Palestinian tanneries is much lower than tanneries worldwide, whereas it is more concentrated with pollutants. Liming process has the highest COD and the highest pH value, where tanning process releases WW highly concentrated with chromium. Real process measurements and mass balance calculations indicated that the chromium uptake efficiency is only 46.6%. Such a low efficiency indicates that cleaner production measures are essential in local tanneries.

Quality of Drinking Water from Springs in Palestine: West Bank as a Case Study.

The shortage of fresh water creates acute challenges in the West Bank of Palestine. Springs provide a main water resource in the West Bank. Investigating springs' water quality is essential step for promoting their public use. The aim of this research is to assess the microbiological and physiochemical quality parameters of drinking water from springs. The study methodology included sampling through field work and laboratory testing for water quality parameters using standard procedures. The study area covered all locations containing licensed springs by the Palestinian Water Authority in the West Bank of Palestine. The number of collected samples was 127 covering 300 springs. The chemical, physical, and biological parameters for each sample were measured. Then, the obtained characteristics were evaluated based on national and international quality standards (PSI and WHO). The investigated parameters included temperature, pH, EC, total hardness, concentrations of nitrate, sodium ions, total chlorine, residual chlorine, turbidity, and total and faecal coliforms. Most of investigated physical and chemical parameters were within the acceptable standard limits. However, the turbidity and chloride and nitrate concentrations exceeded standard limits. The findings indicate that only a minor fraction of the samples (2%) requires chlorination treatment, while most of the springs (97% of samples) are classified as possessing no risk.

Recovery of hydrogel from baby diaper wastes and its application for enhancing soil irrigation management.

Improving irrigation management by using hydrogels is an advanced approach for maximizing agricultural land productivity. This experimental study demonstrated the technical feasibility of utilizing superabsorbent polymer recovered from waste baby diapers for increasing water retention in soil and improving irrigation management. After separation, recovery and cleaning of the recycled hydrogel, experimental parametric study was performed. It investigated the swelling capacity and kinetics, de-swelling behavior, and the effects of temperature, salt concentration, and pH on the performance of recycled hydrogel. Red clay soil modified with the recovered hydrogel was used to investigate water retention ability in soil. The swelling capacity increases with time, until it approaches an equilibrium state within about 100 min. At normal conditions, the equilibrium swelling capacity achieves an equilibrium value of 235 g water/g hydrogel. The swelling capacity increases with temperature, while it decreases with increasing pH or salt concentration. The addition of the recycled hydrogel to soil decreases water loss by infiltration and enhances irrigation management and plant growth.

Dynamics of chelation-supercritical fluid extraction from wood fibers.

The dynamics of supercritical fluid extraction (SFE) of the metal content of wood fibers chelated with lithium bis(trifluoroethyl) dithiocarbamate (FDDC) by supercritical (SF) CO2 was investigated experimentally by monitoring the spectra of the eluted metal complex as a function of time. The characteristic shape of the dynamic SFE curve was determined mainly by the flow conditions in the extraction vessel, the mass transfer resistance in the SF phase, and the solubility. High extraction yields of metal content were obtained in two-stage extraction including static (batch) and dynamic (semi-batch) stages. Increasing the length of the static stage increased the rate of dynamic elution of metal complex until it approached the dynamics of fluid displacement for a continuous stirred tank reactor (CSTR). In such cases, increasing the flow rate had no effect on the dynamic extraction curve when it was plotted using dimensionless time. Efficient chelation-SFE from wood fibers was obtained at a pressure of 20.3 MPa and with a static time of 30 min.