Three-dimensional phenotype characteristics of skeletal class III malocclusion in adult Chinese: a principal component analysis-based cluster analysis.

BACKGROUND: Skeletal class III malocclusion has a diverse and complicated aetiology involving environmental and genetic factors. It is critical to correctly classify and define this malocclusion to be diagnosed and treated on a clinically sound basis. Thus, this study aimed to provide reliable and detailed measurements in a large ethnically homogeneous sample of Chinese adults to generate an adequate phenotypic clustering model to identify and describe the skeletal variation present in skeletal class III malocclusion. MATERIALS AND METHODS: This is a retrospective cross-sectional study in which 500 pre-treatments cone-beam computed tomography (CBCT) scans of patients with skeletal class III malocclusion (250 males and 250 females) were selected following specific selection criteria. Seventy-six linear, angular, and ratios measurements were three-dimensionally analysed using InVivo 6.0.3 software. These measurements were categorised into 47 skeletal, 18 dentoalveolar, and 11 soft tissue variables. Multivariate reduction methods: principal component analyses and cluster analyses were used to present the most common phenotypic groupings of skeletal class III malocclusion in Han ethnic group of Chinese adults. RESULTS: The principal component analysis revealed eight principal components accounted for 72.9% of the overall variation of the data produced from the seventy-six variables. The first four principal components accounted for 53.37% of the total variations. They explained the most variation in data and consisted mainly of anteroposterior and vertical skeletal relationships. The cluster analysis identified four phenotypes of skeletal class III malocclusion: C1, 34%; C2, 11.4%; C3, 26.4%; and C4, 28.2%. CONCLUSION: Based on three-dimensional analyses, four skeletal class III malocclusion distinct phenotypic variations were defined in a large sample of the adult Chinese population, showing the occurrence of phenotypic variation between identified clusters in the same ethnic group. These findings might serve as a foundation for accurate diagnosis and treatment planning of each cluster and future genetic studies to determine the causative gene(s) of each cluster.

Effect of filament types and loops number on the force degradation of elastomeric chains used for orthodontic treatment: an in-vitro study.

BACKGROUND: In orthodontic treatment, closing spaces, specifically the extraction and scattered spaces of the anterior teeth, requires some auxiliary bias, such as an elastomeric chain. Many factors affect the mechanical properties of elastic chains. In this study, we investigated the relationship of the filament type, the number of loops, and the force degradation of elastomeric chains under thermal cycling conditions. METHODS: The orthogonal design included three filament types (i.e., close, medium, and long). Four, five, and six loops of each elastomeric chain were stretched to have an initial force of 250 g in an artificial saliva environment at 37 °C and thermocycling between 5 and 55 °C three times a day. The remaining force of the elastomeric chains was recorded at different time points (4 h, 24 h, 7 days, 14 days, 21 days, and 28 days), and the percentage of the remaining force was calculated. RESULTS: The force decreased significantly in the initial 4 h and degraded mostly within the first 24 h. In addition, the percentage of force degradation increased slightly between 1 and 28 days. CONCLUSIONS: Under the same initial force, the longer the connecting body is, the fewer the number of loops and the greater the force degradation of the elastomeric chain are.

Three dimensional evaluation of the skeletal and temporomandibular joint changes following stabilization splint therapy in patients with temporomandibular joint disorders and mandibular deviation: a retrospective study.

BACKGROUND: Three-dimensional (3D) detailed evaluations of the mandibular mediolateral position, mandibular condylar position, and temporomandibular joint (TMJ) spaces following stabilization splints (SS) therapy in patients with temporomandibular joint disorders (TMD) and mandibular deviation (MD) have not been reported in the available literature. Accordingly, this study aimed to three-dimensionally analyze the skeletal and bony temporomandibular joint changes following stabilization splint therapy in adult patients with temporomandibular joint disorders and mandibular deviation. METHODS: This study is a retrospective clinical study that enrolled 26 adult patients with TMD and MD with a mean age of 24.86 years. The Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) was used to diagnose TMD. SS was adjusted weekly until occlusal contact stabilization occurred, and then adjusted monthly, patients were instructed to wear it at night for at least 10 h. The SS was removed after the elimination of TMD symptoms (TMJ/muscle pain on palpation, muscle spasm, and clicking) and having both condyles completely seated in a musculoskeletally stable position. Pre- and post-therapeutic Cone Beam Computed Tomography (CBCT) was analyzed. Mandibular mediolateral position, TMJ spaces, and mandibular condyle position were analyzed three-dimensionally using Mimics 21.0 software. Paired t-test or Wilcoxon rank-sum test was performed, and the significance level was considered at P < 0.05. RESULTS: The treatment period with SS therapy was 10.07 ± 3.1 months. The deviated chin was improved in 69.23% of the sample; the range of improvement was > 0 mm ≤ 3.9 mm. The mandibular rotation was significantly decreased from 3.58 ± 2.02° to 3.17 ± 1.60. The deviated side's superior and posterior joint TMJ spaces were significantly increased from 2.49 ± 0.88 mm and 1.25 ± 0.79 mm to 2.98 ± 1.02 mm and 1.86 ± 0.72 mm, respectively. The value of the difference from the bilateral condyle head position to the X and Z axes significantly decreased from 2.50 ± 1.56 mm and 2.30 ± 1.57 mm to 1.64 ± 1.58 mm and 1.82 ± 1.11 mm, respectively. CONCLUSION: The main positional effect of the stabilization splint treatment in TMD patients with MD includes considerable correction of mandibular deviation, improving facial asymmetry, and moving the condyle into a stable condylar position; these were done by promoting the mandible to rotate around the Z (roll) and Y (yaw) axes and by forward, downward, and outward condylar movement on the deviated side, respectively.

Correlation between the three-dimensional maxillomandibular complex parameters and pharyngeal airway dimensions in different sagittal and vertical malocclusions.

OBJECTIVES: This study aimed to determine the three-dimensional (3D) correlation between maxillomandibular complex parameters and pharyngeal airway dimensions in different sagittal and vertical malocclusions. METHODS: This retrospective cross-sectional study included the CBCT scans of 368 patients with a mean age of 23.81 ± 3.01 years. The patients were classified into three groups (skeletal Class I, II, and III). Each class group was divided into three subgroups based on vertical growth patterns (hypo-, normo-, and hyperdivergent). The maxillomandibular complex was evaluated in the three planes using 16 skeletal measurements. Naso-, oro-, hypo-, and total pharyngeal airway spaces were assessed in terms of width, volume, surface area, and minimum constricted area (MCA). Two-way ANOVA followed by the Bonferroni post-hoc test were used. RESULTS: The nasopharyngeal airway space was significantly lowest regarding sagittal and lateral widths in the skeletal Class III patients, the lowest volume and surface area were in hyperdivergent patients, and MCA was the highest in Class II and hypodivergent patients. The oro- and hypopharyngeal sagittal width, volume, surface area, and MCA were the lowest in the hyperdivergent patients, and oropharyngeal lateral width and hypopharyngeal sagittal width were the highest in skeletal Class III. The total pharyngeal volume, surface area, and MCA were the lowest in the hyperdivergent patients, and skeletal Class II patients had the lowest MCA. CONCLUSIONS: The pharyngeal airway dimensions differ with various sagittal and vertical malocclusions. These differences could apply to diagnosis, treatment planning, and possible changes following orthodontic/orthopedic or surgical treatment.

A comparison of maxillary sinus diameters in Chinese and Yemeni patients with skeletal malocclusion.

BACKGROUND: This study aimed to compare the maxillary sinus dimensions and surface area in accordance with skeletal malocclusion, gender and ethnicity factors in a sample of Chinese and Yemeni patients. METHODS: This cross-sectional study analysed 180 maxillary sinuses using 180 lateral cephalometric radiographs. The patients were subdivided into two ethnic groups: Chinese and Yemeni. Each ethnic group comprised 90 patients, and men and women were divided equally. Each ethnic group was classified into three skeletal classes using ANB and Wits appraisal (skeletal Classes I, II and III). Pearson's correlation coefficient was also used to assess the relationship between maxillary sinus dimensions and cephalometric parameters. RESULTS: Men had larger maxillary sinuses than women; skeletal Class II had a higher length and surface area increase than other skeletal classes, although skeletal Classes I and II were almost equal in height. Except for the maxillary sinus length, none of these findings were statistically significant. The maxillary sinuses in Chinese are larger than those in Yemenis (P = 0.000). These variables were positively correlated with SNA, SNB and Co-A. The maxillary sinus length and Co-Gn were positively correlated. The NA-APO and NA-FH angles were also correlated with the maxillary sinus surface area. However, the gonial and GoGn-Sn angles negatively affected the maxillary sinus dimension and surface area. CONCLUSIONS: Men had larger maxillary sinuses than women in both ethnic groups, and Chinese individuals had larger maxillary sinuses than Yemenis. Skeletal Class II malocclusion of both ethnicities had larger maxillary sinus dimensions. Furthermore, the maxillary sinus dimensions correlated with cephalometric parameters.

Effect of enamel-surface modifications on shear bond strength using different adhesive materials.

BACKGROUND: This study aimed to investigate the effect of enamel-surface modifications on the shear bond strength between ceramic brackets bonded using different adhesive materials and the enamel surface and to identify the most suitable clinical adhesive and bonding method. Whether the non-acid-etching treatment met the clinical bond strength was also determined. METHODS: A total of 108 extracted premolars were divided into nine groups (n = 12) based on the different enamel-surface modification techniques (acid etching, deproteinization, and wetting). Group 1 was bonded with Transbond™ XT adhesive, whereas groups 2-9 were bonded with resin-modified glass ionomer cement (RMGIC). The treatment methods for each group were as follows: groups 1 and 2, acid etching; group 3, acid etching and wetting; group 4, acid etching and deproteinization; group 5, acid etching, deproteinization, and wetting; group 6, deproteinization; group 7, deproteinization and wetting; group 8, without treatment; and group 9, wetting. The samples' shear bond strength was measured using an universal testing machine. Adhesive remnant index (ARI) was examined using a stereomicroscope. The enamel-surface morphology was observed with a scanning electron microscope. One-way ANOVA with Tukey's post-hoc test and chi-square test were used for statistical analysis, and p < 0.05 and α = 0.05 were considered statistically significant. RESULTS: The ARIs of groups 1-5 and 6-9 were statistically significant (p = 0.000). The enamel surface of groups 1-5 was demineralized, and only a tiny amount of protein remained in groups 7 and 8, whereas a thick layer of protein remained in groups 8 and 9. CONCLUSIONS: RMGIC adhesive did not damage the enamel surface and achieved the required clinical bond strength. The enamel surface was better treated with 5.25% sodium hypochlorite preferably under non-acid-etching conditions.

Three-dimensional assessment of asymmetric mid-palatal suture expansion assisted by a customized microimplant-supported rapid palatal expander in non-growing patients: Uncontrolled Clinical Trial.

OBJECTIVES: The objective was to evaluate the magnitude, incidence and possible factors of asymmetric expansion with a customized microimplant-supported rapid palatal expander (MARPE) in non-growing patients. SETTING AND SAMPLE POPULATION: This retrospective study included a sample of 49 patients (mean age: 23.9 ± 3.9 years) treated with a customized microimplant-supported rapid palatal expander. Based on the symmetry of expansion, the sample was divided into Group S (symmetric expansion group, n = 26) and Group A (asymmetric expansion group, n = 23). METHODS: Pre- and post-treatment cone-beam computed tomography (CBCT) images were superimposed to assess skeletal change in both studied groups. Seven variables were tested: unilateral crossbite, maxillary base cant, chin deviation, the initial asymmetrical position of the mid-palatal suture, split pattern of frontomaxillary suture, Angle's classification and dental arch crowding. Paired t-test and logistic regression analyses were utilized to evaluate the possible factors behind the asymmetric expansion. RESULTS: There was a significant difference (P < .01) between the studied groups. The average expansion was 4.26 mm at the anterolateral maxillary walls (BB) and 3.83 mm at the greater palatine foramen region (GPF). The average expansion at the GPF was 90% of that at the BB. The frequency of asymmetric expansion was 46.9%. Among the seven tested variables, the presence of the initial asymmetric position of the mid-palatal suture is the only variable that showed correlation with asymmetric expansion. CONCLUSION: Initial asymmetric position of the mid-palatal suture is considered a contributing factor of skeletal asymmetric expansion following microimplant-supported rapid palatal expansion in skeletally comparable patients.