Polyaniline/Titania Nanotube-Based Biosensor Strip for Sensitive and Specific Electrochemical Detection of SARS-CoV-2.

This study showcases the creation of a biosensor strip designed for the rapid, precise, and highly sensitive electrochemical detection of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). These biosensor strips were crafted by affixing a monoclonal antibody (mAb) specific to SARS-CoV-2 onto the surface of a commercially screen-printed carbon electrode (SPCE) modified with polyaniline-titania nanotubes (PANi-TNT). The transportable sensing device was constructed by pairing the mAb functionalized strip with a portable potentiostat wirelessly connected to either a Windows or Android device. Fast and specific conjugation between spike protein of SARS-CoV-2 and immobilized anti-SARS-CoV-2 triggered a change in the charge and electron mobility in the biosensing layer of the strip to produce detectable current during chronoamperometric scanning in the presence of a phosphate buffer solution (PBS). The excellent sensitivity and specificity of the sensor toward SARS-CoV-2 were detected as analytical analysis demonstrated linearity in the range of 80 to 200 copies/µL with a limit of detection of 25.59 copies/µL from the dose-response and standard fitted curve. Through experimental validation, the sensor strip's ability to specifically detect SARS-CoV-2 was established, distinguishing it from human coronavirus-OC43 (HCoV-OC43), HCoV-NL63, HCoV-229E, and adenovirus. The results from these tests indicate that these strips possess the potential for the future creation of dependable and easily transportable point-of-care diagnostic devices, enabling swift, sensitive, and precise detection of SARS-CoV-2 in the saliva or nasopharyngeal fluid of individuals infected with the virus.

Water-Soluble Noble Metal Nanoparticle Catalysts Capped with Small Organic Molecules for Organic Transformations in Water.

This article recaps a variety of interesting catalytic studies based on solubilized and freely movable noble metal nanoparticle catalysts employed for organic reactions in either pure water or water-organic biphasic systems. Small organic ligand-capped metal nanoparticles are fundamentally attractive materials due to their enormous potential as a well-defined system that can provide spatial control near active catalytic sites. The nanoparticle catalysts are first grouped based on the synthetic method (direct reduction, phase transfer, and redispersion) and then again based on the type of reaction such as alkene hydrogenation, arene hydrogenation, nitroaromatic reduction, carbon-carbon coupling reactions, etc. The impacts of various ligands on the catalytic activity and selectivity of semi-heterogeneous nanoparticles in water are discussed in detail. The catalytic systems using polymers, dendrimers, and ionic liquids as supporting or protecting materials are excluded from the subject of this review.

Hydrothermal-process-based direct extraction of polydisperse lignin microspheres from black liquor and their physicochemical characterization.

Lignin nano-/microstructures are widely employed for agricultural drug delivery and heavy metal removal from wastewater, and facile low-cost methods of their large-scale production are therefore highly sought after. Herein, uniform-morphology polydisperse lignin microspheres were directly extracted from black liquor by lowering its pH to <4 followed by hydrothermal treatment and featured several lignin-typical characteristics, e.g., functional groups, thermal stability, amorphousness, and monolignol units. It was assumed that lignin rearranged and assembled into microspheres of various size, shape, and uniformity depending on pH, temperature, and hydrothermal treatment time. Lignin microsphere extraction efficiency was estimated as 15.87-21.62 g L-1, and the average size of microspheres obtained under different conditions was calculated as ∼1 µm, while the C, H, O, and N contents equaled 48-62, 5-6, 30-36, and 0.2-1.5%, respectively. Thus, our method was deemed suitable for direct large-scale extraction of lignin microspheres from black liquor.

Tianeptine Abuse and Dependence: Case Report and Literature Review.

BACKGROUND: Tianeptine (Stablon, Coaxil) abuse and dependence has become increasingly prominent worldwide with recent presence in the United States. OBJECTIVE: In this article, we add a case to the growing literature on tianeptine dependence, the first of which is concerning for the presence of an adulterant, and present a comprehensive literature review. METHODS: A literature search was conducted on July 2, 2018 on PubMed for articles using the keywords "tianeptine abuse" and "tianeptine dependence." RESULTS: Literature search resulted in 25 articles and encompassed 65 patients. A majority of patients were male and age ranged from 19 to 67. Routes of intake included oral, intravenous, and insufflation. In the 15 cases of overdose, 8 combined ingestion with at least one other substance, of which 3 resulted in death. Six additional deaths are reported involving tianeptine (9 total). CONCLUSION: Tianeptine abuse and dependence has become a cause for concern in approved markets with recent emergence in the United States. Psychiatrists should be aware of a potentially fatal opiate-like withdrawal in the absence of positive urine drug screens or cases where withdrawal does not follow expected patterns. Tianeptine users should be educated regarding risk associated with this drug. Without further intervention, additional cases should be anticipated.

Emergency Department Medical Clearance of Patients with Psychiatric or Behavioral Emergencies, Part 1.

Patients presenting to the emergency department with mental illness or behavioral complaints merit workup for underlying physical conditions that can trigger, mimic, or worsen psychiatric symptoms. However, interdisciplinary consensus on medical clearance is lacking, leading to wide variations in quality of care and, quite often, poor medical care. Psychiatry and emergency medicine specialty guidelines support a tailored, customized approach. This article summarizes best-practice approaches to the medical clearance of patients with psychiatric illness, tips on history taking, system reviews, clinical or physical examination, and common pitfalls in the medical clearance process.

Emergency Department Medical Clearance of Patients with Psychiatric or Behavioral Emergencies, Part 2: Special Psychiatric Populations and Considerations.

Patients who present to the emergency department (ED) with mental illness or behavioral complaints merit workup for underlying physical conditions that can trigger, mimic, or worsen psychiatric symptoms. However, there are wide variations in quality of care for these individuals. Psychiatry and emergency medicine specialty guidelines support a tailored, customized approach to patients. Our group has long advocated a dynamic comanagement approach for medical clearance in the ED, and this article summarizes best-practice approaches to the medical clearance of patients with psychiatric illness, tips on history taking, system reviews, clinical/physical examination, and common pitfalls in the medical clearance process.

Generating Color from Polydisperse, Near Micron-Sized TiO2 Particles.

Single particle Mie calculations of near micron-sized TiO2 particles predict strong light scattering dominating the visible range that would give rise to a white appearance. We demonstrate that a polydisperse collection of these "white" particles can result in the generation of visible colors through ensemble scattering. The weighted averaging of the scattering over the particle size distribution modifies the sharp, multiple, high order scattering modes from individual particles into broad variations in the collective extinction. These extinction variations are apparent as visible colors for particles suspended in organic solvent at low concentration, or for a monolayer of particles supported on a transparent substrate viewed in front of a white light source. We further exploit the color variations on optical sensitivity to the surrounding environment to promote micron-sized TiO2 particles as stable and robust agents for detecting the optical index of homogeneous media with high contrast sensitivities. Such distribution-modulated scattering properties provide TiO2 particles an intriguing opportunity to impart color and optical sensitivity to their widespread electronic and chemical platforms such as antibacterial windows, catalysis, photocatalysis, optical sensors, and photovoltaics.

Novel preparation and characterization of human hair-based nanofibers using electrospinning process.

Human hair-based biocomposite nanofibers (NFs) have been fabricated by an electrospinning technique. Aqueous keratin extracted from human hair was successfully blended with poly(vinyl alcohol) (PVA). The focus here is on transforming into keratin/PVA nanofibrous membranes and insoluble property of electrospun NFs. The resulting hair-based NFs were characterized using Fourier transform infrared (FT-IR) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), differential scanning colorimetry (DSC), and thermogravimetric analysis (TGA). Toward the potential use of these NFs after cross-linking with various weight fractions of glyoxal, its physicochemical properties, such as morphology, mechanical strength, crystallinity, and chemical structure were investigated. Keratin/PVA ratio of 2/1 NFs with 6 wt%-glyoxal showed good uniformity in fiber morphology and suitable mechanical properties, and excellent antibacterial activity providing a potential application of hair-based NFs in biomedical field.

Chemiluminescence determination of moxifloxacin in pharmaceutical and biological samples based on its enhancing effect of the luminol-ferricyanide system using a microfluidic chip.

A sensitive determination of a synthetic fluoroquinolone antibacterial agent, moxifloxacin (MOX), by an enhanced chemiluminescence (CL) method using a microfluidic chip is described. The microfluidic chip was fabricated by a soft-lithographic procedure using polydimethyl siloxane (PDMS). The fabricated PDMS microfluidic chip had three-inlet microchannels for introducing the sample, chemiluminescent reagent and oxidant, and a 500 µm wide, 250 µm deep and 82 mm long microchannel. An enhanced CL system, luminol-ferricyanide, was adopted to analyze the MOX concentration in a sample solution. CL light was emitted continuously after mixing luminol and ferricyanide in the presence of MOX on the PDMS microfluidic chip. The amount of MOX in the luminol-ferricyanide system influenced the intensity of the CL light. The linear range of MOX concentration was 0.14-55.0 ng/mL with a correlation coefficient of 0.9992. The limit of detection (LOD) and limit of quantification (LOQ) were 0.06 and 0.2 ng/mL respectively. The presented method afforded good reproducibility, with a relative standard deviation (RSD) of 1.05% for 10 ng/mL of MOX, and has been successfully applied for the determination of MOX in pharmaceutical and biological samples.

Chemiluminescence microfluidic system of gold nanoparticles enhanced luminol-silver nitrate for the determination of vitamin B12.

A rapid and sensitive chemiluminescence (CL) system coupled with a microfluidic chip has been presented to determine vitamin B12 (VB12) based on the reaction of luminol and silver nitrate (AgNO(3)) in the presence of gold nanoparticles (AuNPs). A microfluidic chip was fabricated by a soft-lithographic procedure using polydimethyl siloxane (PDMS) having four inlets and one outlet with a 200 µm wide, 250 µm deep, and 100 mm long microchannel. Ag(+) was used as a chemiluminogenic oxidant in this CL reaction which oxidized luminol to produce strong CL signal in the presence of AuNPs. Luminol reacted with AgNO(3) under the catalysis of AuNPs to produce luminol radicals which reacted with dissolved oxygen and emitted CL light. The proposed CL system was applied to determine the amount of VB12 in VB12 tablets and multivitamin. Under the optimum conditions, the CL intensity of the system was increased with the concentration of VB12 in the range of 0.25-100 ng mL(-1) with the correlation coefficient of 0.9982. The limit of detection was found to be 0.04 ng mL(-1) with the relative standard deviation of 1.56 % for five replicate determinations of 25 ng mL(-1) of VB12. The CL reaction mechanism was demonstrated by UV-visible spectra and CL emission spectra.

Enzymeless determination of total sugar by luminol-tetrachloroaurate chemiluminescence on chip to analyze food samples.

Chemiluminescence (CL) emission from luminol-tetrachloroaurate ([AuCl(4)](-)) system studied in presence of monosaccharide sugars such as glucose and fructose was investigated on a microfluidic chip fabricated by the soft lithography technique. CL emission from the luminol-[AuCl(4)](-) system at 430 nm was intensified remarkably by the catalytic activity of glucose and fructose at room temperature. Under optimized conditions, the CL emission intensity of the system was found to be linearly related to the concentration of the sugars. Based on this observation, nonenzymatic determination of total sugar (glucose, fructose, or hydrolyzable sucrose) was performed in a rapid and sensitive analytical method. The results revealed that the linearity ranged from 9 to 1,750 µM for glucose and 80 to 1,750 µM for fructose, with a limit of detection of 0.65 and 0.69 µM, respectively. The relative standard deviations determined at 250 µM based on six repetitive injections were 1.13 and 1.15% for glucose and fructose, respectively. The developed method was successfully applied for determination of the total sugar concentration in food and beverages.

Silver nanoparticles enhanced luminescence of terbium complex in solution for L-dopa determination.

Luminescent properties of a terbium (Tb3+)-L-3, 4-dihydroxyphenylalanine (L-dopa) complex by binding to colloidal silver nanoparticles (Ag NPs) have been presented. Luminescence intensity of the L-dopa complex was dramatically enhanced about 6-7 times by introducing Ag NPs. The Ag NPs concentration on the luminescent intensity was regarded as a main factor that balancing between an enhancing and a quenching effect of the Ag NPs. It was observed that changing the concentration of L-dopa causes the change in luminescence intensity. Under the optimized condition, the luminescence intensity of the system was linearly related to the concentration of L-dopa. Based on this observation, L-dopa-Tb3+ complex containing Ag NPs has been applied for the determination of L-dopa in pharmaceutical formulation. Linear responses of luminescence intensity were observed in the concentration range of 0.25 to 1.5 nM (r = 0.9934) of L-dopa with limit of detection 0.042 nM. The performance of the system was tested using 1.0 x 10(-9) M of L-dopa, yielding a precision of 1.21% RSD for nine replicate measurements. The present method has been successfully applied to determine L-dopa in pharmaceutical samples.

Enhanced luminescence of lanthanide complexes by silver nanoparticles for ciprofloxacin determination.

We present the enhancement of luminescence of europium complex, Eu(3+)-ciprofloxacin (CIP), in the presence of silver nanoparticles (Ag NPs) for the CIP determination. The increment of the luminescence intensity of the Eu(3+)-CIP complex with Ag NPs was obtained due to the transfer of resonance energy to the fluorophores through the interaction of the excited-state fluorophores and surface plasmon electron in the metal nano surface. The luminescence intensity of Eu3+ was enhanced by complexation with CIP at 614 nm after excitation at 373 nm corresponding to the 5D0-7F2 transitions of Eu3+ ion. Based on the above phenomenon, a sensitive and rapid spectrofluorimetric method has been developed for the CIP determination. Linearity of the calibration curve was obtained in the range of 2.0 x 10(-10)-1.0 x 10(-8) g mL(-1) with correlation coefficient of 0.9992. The limit of detection of CIP was found to be 1.9 x 10(-11) g mL(-1) with the relative standard deviation (RSD) of 1.19% for 5 replicate measurements of 5.0 x 10(-7) g mL(-1) of CIP. The present method has been successfully applied for CIP determination in pharmaceutical and biological samples.

Silver nanoparticle-enhanced chemiluminescence method for determining naproxen based on europium(III)-sensitized Ce(IV)-Na2S2O4 reaction.

A simple and sensitive chemiluminescence (CL) method coupled with flow-injection technique is proposed to determine naproxen (NAP). The method is based upon the enhancement of the weak CL signal arising from the reaction of Ce(IV) and Na(2)S(2)O(4) with Eu(3+) to form the Eu(3+)-Ce(IV)-Na(2)S(2)O(4) system. The CL intensity was significantly increased by the introduction of NAP into this system in the presence of silver nanoparticles (Ag NPs). Examination of the recorded UV-vis spectra and fluorescence spectra indicated that the energy of the intermediate SO(2)*, which originated from the redox reaction of Ce(IV) and Na(2)S(2)O(4), was transferred to Eu(3+) via NAP and that the process was accelerated by Ag NPs due to their catalytic activity. Under the optimum conditions, the CL intensity was increased with increasing NAP concentration and the correlation was linear (r = 0.9992) over the NAP concentration range of 1-420 ng mL(-1). The limit of detection (LOD) was 0.11 ng mL(-1) with a relative standard deviation (RSD) of 1.15% for 5 replicate determinations of 200 ng mL(-1) NAP. The method was successfully applied to determine NAP in pharmaceutical and biological samples.

Spectrofluorimetric study of the interaction between europium(III) and moxifloxacin in micellar solution and its analytical application.

A sensitive spectrofluorimetric method has been developed for the determination of moxifloxacin (MOX) using europium(III)-MOX complex as a fluorescence probe in the presence of an anionic surfactant, sodium dodecyl benzene sulfonate (SDBS). The fluorescence (FL) intensity of Eu(3+) was enhanced by complexation with MOX at 614 nm after excitation at 373 nm. The FL intensity of the Eu(3+)-MOX complex was significantly intensified in the presence of SDBS. Under the optimum conditions, it was found that the enhanced FL intensity of the system showed a good linear relationship with the concentration of MOX over the range of 1.8 × 10(-11)-7.3 × 10(-9) g mL(-1) with a correlation coefficient of 0.9998. The limit of detection of MOX was found to be 2.8 × 10(-12) g mL(-1) with relative standard deviation (RSD) of 1.25% for 5 replicate determination of 1.5 × 10(-8) g mL(-1) MOX. The proposed method is simple, offers higher sensitivity with wide linear range and can be successfully applied to determine MOX in pharmaceutical and biological samples with good reproducibility. The luminescence mechanism is also discussed in detail with ultraviolet absorption spectra.

A terbium-sensitized spectrofluorimetric method for determination of catecholamines in a serum sample with micelle medium.

A terbium-sensitized spectrofluorimetric method has been developed for determination of catecholamines such as norepinephrine (NE), epinephrine (EP) and dopamine (DA), using sodium dodecyl benzene sulphonate (SDBS). Fluorescence sensitization of terbium ions (Tb(3+) ) by complexation with catecholamines in the presence of SDBS was observed. The fluorescence intensities of the Tb(3+) -catecholamine complexes were highly enhanced by introducing SDBS with an emission maximum at 545 nm after excitation at 290 nm. The conditions for the complex formation of Tb(3+) -catecholamine were investigated systematically and optimized to determine catecholamines in a serum sample. Under the optimum conditions, the fluorescence intensities of the Tb(3+) -catecholamine complexes were increased linearly with the concentration of NE, EP and DA over the ranges 2.5 × 10(-10) -1.0 × 10(-8) , 2.5 × 10(-10) -1.0 × 10(-8) and 2.5 × 10(-9) -1.0 × 10(-7) g/mL with correlation coefficients of 0.999, 0.999 and 0.9996, respectively. The limits of detection (3δ) of NE, EP and DA were found to be 4.6 × 10(-11) , 7.8 × 10(-11) and 8.38 × 10(-10) g/mL, respectively. Precision of the method was tested at the concentration level of 1.2 × 10(-7) g/mL for five replicate measurements of NE, EP and DA, giving relative standard deviations (RSDs) of 1.41%, 1.23% and 1.89%, respectively. The interaction mechanism of the Tb(3+) -catecholamine complexes system was investigated and presented with ultraviolet absorption spectra. The proposed method has been applied for the quantitative determination of NE, EP and DA in a spiked serum sample and a pharmaceutical preparation sample.

Ultrasensitive study of gatifloxacin based on its enhancing effect on the cerium (IV)-sodium hyposulfite chemiluminescence reaction in a micellar medium.

A sensitive and rapid flow-injection chemiluminescence (CL) method has been developed for the determination of gatifloxacin in pharmaceutical preparations and biological samples. The method is based on the enhancing effect of gatifloxacin on CL emission generated by the interaction of Ce (IV) in sulphuric acid and sodium hyposulphite (Na(2)S(2)O(4)) sensitized by sodium dodecyl benzene sulfonate (SDBS). Strong CL emission was observed when gatifloxacin was injected into the Ce (IV) in sulphuric acid and Na(2)S(2)O(4) solution incorporated with SDBS in a flow-cell. Several experimental parameters affecting the CL reaction were investigated and optimized systematically. Under the optimum conditions, it was found that the CL intensity is proportional to the concentration of gatifloxacin in the range of 1.12 × 10(-11)-4.40 × 10(-9) g mL(-1) with a co-relation coefficient of 0.9994. The limit of detection was found to be 4.87 × 10(-12) g mL(-1) and the relative standard deviation (RSD, n=7) was 1.8% for 4 × 10(-8) g mL(-1) of GFLX. The proposed method offers higher sensitivity, wide linear range and better stability without requiring sophisticated instrumentation. Thus, the proposed method has been successfully applied to the determination of gatifloxacin in pharmaceuticals, serum and human urine.