An enhanced gain non-isolated quadratic boost DC-DC converter with continuous source current.

In this paper, a non-isolated quadratic boost DC-DC converter has been proposed. The proposed converter provides high output voltage gain with a lower component count on the structure. In addition, the input side inductor provides continuous source current and the output voltage is positive. Since the proposed topology possesses the continuous source current, it simplifies the filter design at the input side further making the converter suitable for photovoltaic applications. Another important feature of this converter includes the utilization of the same switch ground that omits the additional control power supply in the system design. The detailed mathematical modeling of the proposed topology including the steady state analysis for different modes of operations, voltage stress calculations of the components, and power loss calculations have been precisely demonstrated in this work. The simulation has been carried out in Matlab/Simulink software. Finally, a 250 W experimental prototype has been developed and tested in the laboratory environment and the peak efficiency of the proposed topology has been found 92% at 50% duty cycle, which validates the correctness of the theoretical and simulation outcomes of the proposed work.

The relationship between spirituality and aggression in the workplace during the COVID-19 pandemic: A cross-sectional study among Iranian nurses.

BACKGROUND: Aggression towards nurses in the workplace arises from various reasons, reportedly increasing during the COVID-19 pandemic. Where aggression can be maintained by spiritual well-being, as it is said that spirituality is a coping skill and psychological well-being maintainer-but there is little known, especially during the pandemic. Thus, this study explored the effect of spirituality on aggression among the nurses working in the COVID-19 wards. METHODS: This cross-sectional data from 200 nurses involved in the COVID-19 patient treatment were collected using a random sampling method from four hospitals in East Mazandaran province, Iran. Responses were collected based on socio-demographics, Buss-Perry Aggression Questionnaire, and Paloutzian & Ellison Spiritual Well-being Scale. T-test, ANOVA, Pearson correlation coefficient, and multiple linear regression were applied for data analysis. RESULTS: The mean age of nurses was 31.49±6.88 (range: 21-48) years. Nurses working in the COVID-19 wards have a mean score of spiritual health of 67.21±12.84 (out of 120), whereas 51.77±10.96 (out of 116) was for aggression. The results showed a significant negative weak correlation between aggression and spiritual health (r = -.285, p<0.01). As per regression analysis, spiritual health [ß = -.264], age [ß = -.374], and working experience [ß = 4.156] were the significant factors associated with aggression (p<0.05). CONCLUSIONS: It is evident that nurses who consider spirituality in their life actions are in a state of reduced negative emotions, such as aggression. Thus, policymakers and managers of the healthcare settings are suggested to promote spirituality among the nurses through spiritual care education, providing the ground for promoting spirituality and a positive attitude towards it.

Recent Advances in Nondestructive Method and Assessment of Corrosion Undercoating in Carbon-Steel Pipelines.

Carbon-steel pipelines have mostly been utilized in the oil and gas (OG) industry owing to their strength and cost-effectiveness. However, the detection of corrosion under coating poses challenges for nondestructive (ND) pipeline monitoring techniques. One of the challenges is inaccessibility because of the pipeline structure, which leads to undetected corrosion, which possibly leads to catastrophic failure. The drawbacks of the existing ND methods for corrosion monitoring increase the need for novel frameworks in feature extraction, detection, and characterization of corrosion. This study begins with the explanations of the various types of corrosion in the carbon-steel pipeline in the OG industry and its prevention methods. A review of critical sensors integrated with various current ND corrosion monitoring systems is then presented. The importance of acoustic emission (AE) techniques over other ND methods is explained. AE data preprocessing methods are discussed. Several AE-based corrosion detection, prediction, and reliability assessment models for online pipeline condition monitoring are then highlighted. Finally, a discussion with future perspectives on corrosion monitoring followed by the significance and advantages of the emerging AE-based ND monitoring techniques is presented. The trends and identified issues are summarized with several recommendations for improvement in the OG industry.

Thousand-atom ab initio calculations of excited states at organic/organic interfaces: toward first-principles investigations of charge photogeneration.

Predicting electronically excited states across electron-donor/electron acceptor interfaces is essential for understanding the charge photogeneration process in organic solar cells. However, organic solar cells are large and disordered systems, and their excited states cannot be easily accessed by conventional quantum chemistry approaches. Moreover, a large number of excited states must be obtained to fully understand the charge separation mechanism. Recently, we have developed a novel fragment-based excited state method which can efficiently calculate a large number of states in molecular aggregates. In this article, we demonstrate the large-scale excited-state calculations by investigating interfacial charge transfer (ICT) states across the electron-donor/electron acceptor interfaces. As the model systems, we considered the face-on and edge-on configurations of pentacene/C60 bilayer heterojunction structures. These model structures contain approximately 1.8 × 105 atoms, and their local interface regions containing 2000 atoms were treated quantum mechanically, embedded in the electrostatic potentials from the remaining parts. Therefore, the charge delocalization effect, structural disorder, and the resulting heterogeneous electrostatic and polarizable environments were taken into account in the excited-state calculations. The computed energies of the low-lying ICT states are in reasonable agreement with experimental estimates. By comparing the edge-on and face-on configurations of the pentacene/C60 interfaces, we discuss the influence of interfacial morphologies on the energetics and charge delocalization of ICT states. In addition, we present the detailed characterization of excited states and highlight the importance of hybridization effects between pentacene excited states and ICT states. The large-scale ab initio calculations for the interface systems enabled the exploration of the ICT states, leading to first-principles investigation of the charge separation mechanism in organic solar cells.

Crystal and electronic structures of substituted halide perovskites based on density functional calculation and molecular dynamics.

Durability of organo-lead halide perovskite are important issue for its practical application in a solar cells. In this study, using density functional theory (DFT) and molecular dynamics, we theoretically investigated a crystal structure, electronic structure, and ionic diffusivity of the partially substituted cubic MA0.5X0.5PbI3 (MA = CH3NH3+, X = NH4+ or (NH2)2CH+ or Cs+). Our calculation results indicate that a partial substitution of MA induces a lattice distortion, resulting in preventing MA or X from the diffusion between A sites in the perovskite. DFT calculations show that electronic structures of the investigated partially substituted perovskites were similar with that of MAPbI3, while their bandgaps slightly decrease compared to that of MAPbI3. Our results mean that partial substitution in halide perovskite is effective technique to suppress diffusion of intrinsic ions and tune the band gap.

Determination of heavy metals in the soils of tea plantations and in fresh and processed tea leaves: an evaluation of six digestion methods.

BACKGROUND: The aim of this study was to determine the levels of cadmium (Cd), chromium (Cr), lead (Pb), arsenic (As) and selenium (Se) in (1) fresh tea leaves, (2) processed (black) tea leaves and (3) soils from tea plantations originating from Bangladesh. METHODS: Graphite furnace atomic absorption spectrometry (GF-AAS) was used to evaluate six digestion methods, (1) nitric acid, (2) nitric acid overnight, (3) nitric acid-hydrogen peroxide, (4) nitric-perchloric acid, (5) sulfuric acid, and (6) dry ashing, to determine the most suitable digestion method for the determination of heavy metals in the samples. RESULTS: The concentration ranges of Cd, Pb, As and Se in fresh tea leaves were from 0.03-0.13, 0.19-2.06 and 0.47-1.31 µg/g, respectively while processed tea contained heavy metals at different concentrations: Cd (0.04-0.16 µg/g), Cr (0.45-10.73 µg/g), Pb (0.07-1.03 µg/g), As (0.89-1.90 µg/g) and Se (0.21-10.79 µg/g). Moreover, the soil samples of tea plantations also showed a wide range of concentrations: Cd (0.11-0.45 µg/g), Pb (2.80-66.54 µg/g), As (0.78-4.49 µg/g), and Se content (0.03-0.99 µg/g). Method no. 2 provided sufficient time to digest the tea matrix and was the most efficient method for recovering Cd, Cr, Pb, As and Se. Methods 1 and 3 were also acceptable and can be relatively inexpensive, easy and fast. The heavy metal transfer factors in the investigated soil/tea samples decreased as follows: Cd > As > Se > Pb. CONCLUSION: Overall, the present study gives current insights into the heavy metal levels both in soils and teas commonly consumed in Bangladesh.

Prospects of Graphene as a Potential Carrier-Transport Material in Third-Generation Solar Cells.

Third-generation solar cells are understood to be the pathway to overcoming the issues and drawbacks of the existing solar cell technologies. Since the introduction of graphene in solar cells, it has been providing attractive properties for the next generation of solar cells. Currently, there are more theoretical predictions rather than practical recognitions in third-generation solar cells. Some of the potential of graphene has been explored in organic photovoltaics (OPVs) and dye-sensitized solar cells (DSSCs), but it has yet to be fully comprehended in the recent third-generation inorganic-organic hybrid perovskite solar cells. In this review, the diverse role of graphene in third-generation OPVs and DSSCs will be deliberated to provide an insight on the prospects and challenges of graphene in inorganic-organic hybrid perovskite solar cells.

Organochlorine insecticide residues are found in surface, irrigated water samples from several districts in Bangladesh.

The purpose of this study was to investigate the occurrence and distribution of organochlorines such as aldrin, dieldrin, dichlorodiphenyldichloroethylene (DDE), dichlorodiphenyldichloroethane (DDD), dichlorodiphenyltrichloroethane (DDT), endrin, lindane and heptachlor insecticide residues in irrigated surface water samples collected from 22 districts in Bangladesh. The concentrations of the pesticides were determined using gas chromatography mass spectrophotometry. Water samples from five locations (Feni, Nawabganj, Putia, Burichang and Chatak) were contaminated with DDT; the highest DDT concentration detected was 8.29 µg/L, and its metabolite, DDE, was detected at 4.06 µg/L. Water samples from four other locations (Natore, Sikderpara, Chatak and Rajoir) were contaminated with heptachlor residues, and the highest level detected was 5.24 µg/L, which is the above the maximum contaminant level recommended by the World Health Organisation. A water sample collected from Chatak, Sunamganj, was contaminated with both DDT and heptachlor pesticide residues. None of the water samples were contaminated with aldrin, DDD, dieldrin, endrin or lindane. It is concluded that continuous, long-term monitoring and essential steps to limit the use of the pesticides in Bangladesh are needed.

Antibacterial properties of essential oils and methanol extracts of sweet basil Ocimum basilicum occurring in Bangladesh.

The antibacterial potential of essential oils and methanol extracts of sweet basil Ocimum basilicum L. (Lamiaceae) was evaluated for controlling the growth range of food-borne pathogenic bacteria. Essential oils extracted by hydrodistillation from the leaves and stems were analyzed by GC-MS. Fifty-seven compounds representing 94.9 and 96.1% of the total leaf and stem oils, respectively, were identified, of which methyl chavicol (36.7 and 29.9%), gitoxigenin (9.3 and 10.2%), trimethoquinol (10.3 and 8.4%), beta-guaiene (3.7 and 4.1%), aciphyllene (3.4 and 3.0%), alizarin (3.2 and 4.4%), naphthaline (2.2 and 3.8%), (-)-caryophyllene (2.0 and 1.9%), and mequinol (1.6 and 1.8%) were the major compounds. The essential oils (10 microL/disc of 1:5, v/v dilution with methanol) and methanol extracts (300 microg/disc) of O. basilicum displayed a great potential of antibacterial activity against Bacillius cereus, B. subtilis, B. megaterium, Staphylococcus aureus, Listeria monocytogenes, Escherichia coli, Shigella boydii, S. dysenteriae, Vibrio parahaemolyticus, V. mimicus, and Salmonella typhi with their respective zones of inhibition of 11.2-21.1 mm and MIC values of 62.5-500 microg/mL. The results of this study suggest that the natural products derived from O. basilicum may have potential use in the food and/or pharmaceutical industries as antimicrobial agents.