A Nonlinear Pulse Shaping Method Using Resonant Piezoelectric MEMS Devices.

In this article, a methodology for increasing the displacement of the membrane in nonlinear transducers is presented. This methodology that relies on pulse shaping is based on the frequency modulation of the excitation signal which in turn results in an amplitude modulation of the displacement of the resonator. The benefits of pulse shaping include the increase of the displacement of the membrane of the resonator, the ability to leverage two mechanisms to dynamically tune the resonant frequency of the device and a relative control of the decay time of the resonator. These properties have been verified using simulations and experimental results. The experimental results are performed using two nonlinear resonators with a frequency of 3.9 and 7.9 kHz. With a constant amplitude of the excitation voltage, experimental results show that the use of pulse shaping allows a velocity increase of the membrane of a piezoelectric microelectromechanical systems (MEMS) resonator of up to 191% for a softening type resonator (STR), and 348% for a hardening type resonator (HTR). The frequency tuning mechanism allowed the operation of the STR and of the HTR over a bandwidth of 280 and 115 Hz, respectively, while providing higher velocity than with the non-optimized excitation signal. The resulting pulse shaping methodology can be applied to other nonlinear resonators as shown using simulation and experimental results. Therefore, this work should lead to an increase of the use of nonlinear resonators for various applications.

Control of Spring Softening and Hardening in the Squared Daisy.

Nonlinear, mechanical microelectromechanical system (MEMS) resonating structures exhibit large displacement and a relatively broad operating bandwidth. These unique features make them particularly of interest for the development of MEMS actuators and sensors. In this work, a mechanical MEMS structure allowing the designer to determine the type of nonlinearity, that is, softening or hardening, based on its anchor scheme is presented. Effects of the excitation signal on the behavior of the proposed MEMS in the frequency domain are investigated. In this regard, a comprehensive experimental comparison among the nonlinear behaviors of softening and hardening has been conducted. To reduce the hysteresis effect to a minimum, an excitation approach, which is a pulsed sweep in frequency with a discrete resolution, is presented. The maximal velocity, quality factor, bandwidth, and resonant frequency of these two types of nonlinear MEMS resonators are compared under three different types of excitation. Finally, it is shown that the performance and characteristics extracted from nonlinear mechanical MEMS resonating structures are highly dependent on the excitation method. Hence, in the present case, the apparent performances of the MEMS resonator can increase by up to 150% or decrease by up to 21%, depending on the excitation approaches. This implies the necessity of a standardized testing methodology for nonlinear MEMS resonators for given end applications.

Design of the Squared Daisy: A Multi-Mode Energy Harvester, with Reduced Variability and a Non-Linear Frequency Response.

With the rise of the Internet of Things (IoT) and the ever-increasing number of integrated sensors, the question of powering these devices represents an additional challenge. The traditional approach is to use a battery; however, harvesting energy from the environment seems to be the most practical approach. To that end, the use of piezoelectric MEMS energy has been proven as a potential power source in a wide range of applications. In this work, a proof of concept for a new architecture for MEMS energy harvesters is presented. The influence of the dimensions and different characteristics of these designs is discussed. These designs have been proven to be resilient to process variation thanks to their unique architecture. This work presents the use of vibration enhancement petals in order to widen the bandwidth of the energy harvester and provide a non-linear frequency response. The use of these vibration enhancement petals has allowed the fabrication of three design variations, each using an area of 1700 µm by 1700 µm. These designs have an operating bandwidth between 3.9 kHz and 14.5 kHz and can be scaled to achieve other targeted resonant frequencies.

Effects of Proof Mass Geometry on Piezoelectric Vibration Energy Harvesters.

Piezoelectric energy harvesters have proven to have the potential to be a power source in a wide range of applications. As the harvester dimensions scale down, the resonance frequencies of these devices increase drastically. Proof masses are essential in micro-scale devices in order to decrease the resonance frequency and increase the strain along the beam to increase the output power. In this work, the effects of proof mass geometry on piezoelectric energy harvesters are studied. Different geometrical dimension ratios have significant impact on the resonance frequency, e.g., beam to mass lengths, and beam to mass widths. A piezoelectric energy harvester has been fabricated and tested operating at a frequency of about 4 kHz within the audible range. The responses of various prototypes were studied, and an optimized T-shaped piezoelectric vibration energy harvester design is presented for improved performance.