Variations in micronutrient concentrations and retentions in fufu made from yellow-fleshed cassava as a function of genotype and processing methods.

Introduction: The biofortification of staple foods such as cassava is one of the technological breakthroughs in the nutritional improvement of foods. Fufu is one of the fermented cassava products produced and consumed in major West African countries, including Sierra Leone, and the majority of the processes involved in its production have direct and indirect effects on its properties. This study looked at how the concentration and retention of micronutrients in yellow-fleshed cassava fufu varied depending on genotype and processing method. Methods: Six yellow-fleshed cassava root genotypes (TMS-070557, TMS-011371, TMS-011412, TMS-011663, TMS-083724, TMS-083774) and one white (TME 419 as a control) were processed into fufu using both conventional (oven and sun-dried) and traditional (bowl and river) methods. The Statistical Analysis System (SAS) version 9.4 was used to analyze data using means, percentages, analysis of variance and means separated by least significant differences (LSD). Results and Discussion: In the modified traditional river method, raw and cooked fufu samples had significantly higher ß-carotene concentrations and true retention (TR) percentages (11.06 g/g (46.77%) and 4.54 g/g (16.94%), respectively) than other genotypes (p < 0.0001). Modified traditional fufu processing methods increased total ß-carotene concentrations, while raw roots showed a significant decrease in total carotenoid and ß-carotene concentrations, regardless of genotype or processing method. Sun-drying was the most effective method, with significantly higher concentrations and TR percentages of iron (10.01 mg/kg, 18.02%) and zinc (11.49 mg/kg, 40.64%) in raw and cooked fufu samples. Genotype TMS-083724 outperformed both conventional fufu processing methods, displaying a significant total carotenoid concentration and true retention percentage. Finally, this study found that the concentrations and percentages of TR of micronutrients varied depending on the processing method and genotype. It is recommended that a modified traditional river fufu processing method be further developed and improved in order to maximize provitamin A carotenoids, concentrations, and percentage TR.

Review of instrumental texture measurements as phenotypic tool to assess textural diversity of root, tuber and banana food products.

Roots, tubers and bananas (RTBs) contribute immensely to food security and livelihoods in sub-Saharan Africa, Asia and Latin America. The adoption of RTB genotypes in these regions relies on the interplay among agronomic traits, ease of processing and consumer preference. In breeding RTBs, until recently little attention was accorded key textural traits preferred by consumers. Moreover, a lack of standard, discriminant, repeatable protocols that can be used to measure the textural traits deter linkages between breeding better RTB genotypes and end user/consumer preferences. RTB products texture - that is, behaviour of RTB food products under unique deformations, such as disintegration and the flow of a food under force - is a critical component of these preferences. The preferences consumers have for certain product texture can be evaluated from expert sensory panel and consumer surveys, which are useful tools in setting thresholds for textural traits, and inform breeders on what to improve in the quality of RTBs. Textural characterization of RTBs under standard operating procedures (SOPs) is important in ensuring the standardization of texture measurement conditions, predictability of textural quality of RTBs, and ultimately definition of RTB food product profiles. This paper reviews current SOPs for the textural characterization of RTBs, including their various associated methods, parameters, challenges and merits. Case studies of texture characterized during development of SOPs and evaluation of texture of RTB populations are discussed, together with insights into key textural attributes and correlations between instrumental, sensory and consumer assessment of texture unique to various RTB food products. Hardness was considered a universal key textural attribute to discriminate RTBs. The review should provide adequate insight into texture of RTB food products and critical factors in their measurement. It aims to promote inclusion of texture in breeding pipelines by investigating which textural traits are prioritized by consumers, particularly since the inclusion of textural traits has recently gained prominence by breeders in improving RTBs. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Correlate the cyanogenic potential and dry matter content of cassava roots and leaves grown in different environments.

Cassava (Manihot esculenta Crantz) is an essential stable food crop in Sub-Saharan Africa commonly consumed amongst the low-income communities in Africa. Though cassava roots and leaf have vast economic and commercial benefits, it produces cyanogenic glycosides, which are toxic and most often responsible for the bitter taste of some cassava cultivars. The study evaluates the cassava roots and leaves' cyanogenic potential and dry matter content of the Genetic Gain Assessment trial grown in a different environment. It establishes the association between the cyanogenic potential (CNP) and the roots and leaves dry matter (DM). Genetic Gain Assessment (GGA) cassava genotypes (N = 400) selected for the Uniform Yield Trial (UYT) breeding stage were planted under IVS (Dry season in Inland Valley Hydromorphic area) and Upland (rain-fed conditions) in two locations of IITA Research Farms, namely; Ibadan (IVS and Upland) and Mokwa (Upland) in Nigeria. The CNP content of cassava leaves in IVS, Mokwa, and Upland ranged from 3.39 to 272.16 mg/100 g, 4.28 to 228.72 mg/100 g, and 13.13 to 127.39 mg/100 g, respectively. However, the respective CNP range in root samples across IVS, Mokwa, and Upland was 0.76-76.31 mg/100 g, 0.94-136.53 mg/100 g, and 2.37-47.11 mg/100 g. Also, the mean ± SD of DM content of leaves were 27.97 ± 3.01%, 28.81 ± 4.01%, and 13.65 ± 3.69%, respectively, in IVS, Mokwa, and Upland, while the root samples had mean ± SD of DM content of 38.09 ± 4.80%, 32.69 ± ,5.93% and 24.63 ± 5.07% respectively. Furthermore, location and genotype had a highly significant effect (p < 0.001) on the CNP and DM of roots and leaves. Also, linear regressions were established between CNP and DM of root and leaf with regression equation; DM-Root = 1.1999*DM-Leaf (r = 0.956) and CNP-Root = 0.29006*CNP-Leaf (r = 0.54). The relationship between the DM (root and leaf) and CNP (root and leaf) could serve as a valuable "inter-prediction" tool for these parameters.

Development and validation of near-infrared spectroscopy procedures for prediction of cassava root dry matter and amylose contents in Ugandan cassava germplasm.

BACKGROUND: Cassava utilization for food and/or industrial products depends on inherent properties of root dry matter content (DMC) and the starch fraction of amylose content (AC). Accordingly, in the present study, near-infrared reflectance spectroscopy (NIRS) models were developed to aid breeding and selection of DMC and AC as critical industrial traits taking care of root sample preparation and cassava germplasm diversity available in Uganda. RESULTS: Upon undertaking calibrations and cross-validations, best models were adopted for validation. DMC in calibration samples ranged from 20 to 45 g 100g-1 , whereas, for amylose content, it ranged from 14 to 33 g 100g-1 . In the validation set, average DMC was 29.5 g 100g-1 , whereas, for amylose content, it was 24.64 g 100g-1 . For DMC, a modified partial least square regression model had regression coefficients (R2 ) of 0.98 and 0.96, respectively, in the calibration and validation set. These were also associated with low bias (-0.018) and ratio of performance deviation that ranged from 4.7 to 5.0. In addition, standard error of prediction values ranged from 0.9 g 100g-1 to 1.06 g 100g-1 . For AC, the regression coefficient was 0.91 for the calibration set and 0.94 for the validation set. A bias equivalent to -0.03 and a ratio of performance deviation of 4.23 were observed. CONCLUSION: These findings confirm the robustness of NIRS in the estimation of dry matter content and amylose content in cassava roots and thus justify its use in routine cassava breeding operations. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Food quality profile of pounded yam and implications for yam breeding.

BACKGROUND: Assessment of the key preferred quality traits in pounded yam, a popularly consumed yam food product in West Africa, is often done through sensory evaluation. Such assessment is time-consuming and results may be biased. Therefore, there is a need to develop objective, high-throughput methods to predict the quality of consumer-preferred traits in pounded yam. This study focused on how key quality traits in pounded yam proposed to yam breeders were determined, measured by biophysical and biochemical methods, in order to shorten the breeding selection cycle through adoption of these methods by breeders. RESULTS: Consumer tests and sensory quantitative descriptive analysis (QDA) validated that preferred priority quality traits in pounded yam were related to textural quality (smooth, stretchable, moldable, slightly sticky and moderately hard) and color (white, cream or light yellow). There were significant correlations between sensory textural quality attributes cohesiveness/moldability, hardness, and adhesiveness/stickiness, with textural quality measurements from instrumental texture profile analysis (TPA). Color measurement parameters (L*, a*, and b*) with chromameter agreed with that of sensory evaluation and can replace the sensory panel approach. The smoothness (R2 = 1.00), stickiness (R2 = 1.00), stretchability (R2 = 1.00), hardness (R2 = 0.99), and moldability (R2 = 0.53) of pounded yam samples can be predicted by the starch, amylose, and protein contents of yam tubers estimated by near-infrared spectroscopy. CONCLUSION: TPA and Hunter colorimeter can be used as medium-high throughput methods to evaluate the textural quality and color of pounded yam in place of the sensory panelists. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Drivers of consumer acceptability of cassava gari-eba food products across cultural and environmental settings using the triadic comparison of technologies approach (tricot).

BACKGROUND: Nigeria and Cameroon are multi-ethnic countries with diverse preferences for food characteristics. The present study aimed to inform cassava breeders on consumer-prioritized eba quality traits. Consumer testing was carried out using the triadic comparison of technologies (tricot). Diverse consumers in villages, towns and cities evaluated the overall acceptability of eba made from different cassava genotypes. Data from both countries were combined and linked to laboratory analyses of eba and the gari used to make it. RESULTS: There is a strong preference for eba with higher cohesiveness and eba from gari with higher brightness and especially in Cameroon, with lower redness and yellowness. Relatively higher eba hardness and springiness values are preferred in the Nigerian locations, whereas lower values are preferred in Cameroon. Trends for solubility and swelling power of the gari differ between the two countries. The study also reveals that the older improved cassava genotype TMS30572 is a benchmark genotype with superior eba characteristics across different regions in Nigeria, whereas the recently released variety Game changer performs very well in Cameroon. In both locations, the recently released genotypes Obansanjo-2 and improved variety TM14F1278P0003 have good stability and overall acceptability for eba characteristics. CONCLUSION: The wide acceptance of a single genotype across diverse geographical and cultural conditions in Nigeria, as well as three acceptable new improved varieties in both locations, indicates that consumers' preferences are surprisingly homogeneous for eba. This would enhance breeding efforts to develop varieties with wider acceptability and expand potential target areas for released varieties. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Convolutional neural network allows amylose content prediction in yam (Dioscorea alata L.) flour using near infrared spectroscopy.

BACKGROUND: Yam (Dioscorea alata L.) is the staple food of many populations in the intertropical zone, where it is grown. The lack of phenotyping methods for tuber quality has hindered the adoption of new genotypes from breeding programs. Recently, near-infrared spectroscopy (NIRS) has been used as a reliable tool to characterize the chemical composition of the yam tuber. However, it failed to predict the amylose content, although this trait is strongly involved in the quality of the product. RESULTS: This study used NIRS to predict the amylose content from 186 yam flour samples. Two calibration methods were developed and validated on an independent dataset: partial least squares (PLS) and convolutional neural networks (CNN). To evaluate final model performances, the coefficient of determination (R2 ), the root mean square error (RMSE), and the ratio of performance to deviation (RPD) were calculated using predictions on an independent validation dataset. The tested models showed contrasting performances (i.e., R2 of 0.72 and 0.89, RMSE of 1.33 and 0.81, RPD of 2.13 and 3.49 respectively, for the PLS and the CNN model). CONCLUSION: According to the quality standard for NIRS model prediction used in food science, the PLS method proved unsuccessful (RPD < 3 and R2 < 0.8) for predicting amylose content from yam flour but the CNN model proved to be reliable and efficient method. With the application of deep learning methods, this study established the proof of concept that amylose content, a key driver of yam textural quality and acceptance, can be predicted accurately using NIRS as a high throughput phenotyping method. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Prediction of functional characteristics of gari (cassava flakes) using near-infrared reflectance spectrometry.

Gari is a creamy, granular flour obtained from roasting fermented cassava mash. Its preparation involves several unit operations, including fermentation, which is essential in gari production. Fermentation brings about specific biochemical changes in cassava starch due to the actions of lactic acid bacteria. Consequently, it gives rise to organic acids and a significant reduction in the pH. Consumer preferences for gari are influenced by these changes and impact specific functional characteristics, which are often linked to cassava genotypes. Measurement of these functional characteristics is time-consuming and expensive. Therefore, this study aimed to develop high-throughput and less expensive prediction models for water absorption capacity, swelling power, bulk density, and dispersibility using Near-Infrared Reflectance Spectroscopy (NIRS). Gari was produced from 63 cassava genotypes using the standard method developed in the RTB foods project. The prediction model was developed by dividing the gari samples into two sets of 48 samples for calibration and 15 samples as the validation set. The gari samples were transferred into a ring cell cup and scanned on the NIRS machine within the Vis-NIR range of 400-2,498 nm wavelength, though only the NIR range of 800-2,400 nm was used to build the model. Calibration models were developed using partial least regression algorithms after spectra pre-processing. Also, the gari samples were analysed in the laboratory for their functional properties to generate reference data. Results showed an excellent coefficient of determination in calibrations (R2 Cal) of 0.99, 0.97, 0.97, and 0.89 for bulk density, swelling power, dispersibility, and water absorption capacity, respectively. Also, the performances of the prediction models were tested using an independent set of 15 gari samples. A good prediction coefficient (R2 pred) and low standard error of prediction (SEP) was obtained as follows: Bulk density (0.98), Swelling power (0.93), WAC (0.68), Dispersibility (0.65), and solubility index (0.62), respectively. Therefore, NIRS prediction models in this study could provide a rapid screening tool for cassava breeding programs and food scientists to determine the food quality of cassava granular products (Gari).

Characterizing quality traits of boiled yam: texture and taste for enhanced breeding efficiency and impact.

BACKGROUND: Boiled yam key quality attributes typical for West African consumers are that it is crumbly, easy to break and has a sweet taste. New yam varieties are being developed but high- or medium-throughput tools to assess the required quality traits and their range of acceptance are limited. This study assessed the acceptance thresholds of these quality attributes and established predictive models for screening yam varieties that meet the required consumer preferences. RESULTS: Overall liking was associated with sweet taste, crumbliness and easiness to break (r-values 0.502, 0.291 and -0.087, respectively). These parameters and selected biophysical parameters highly discriminated the boiled yam varieties. Crumbly texture and easiness to break were well predicted by penetration force and dry matter, whereas sweet taste were well predicted by dry matter and sugar intensity. A high crumbliness and sweet taste are preferred (sensory scores above 6.19 and 6.22 for crumbly and sweet taste, respectively, on a 10 cm unstructured line scale), while a too high easiness to break is disliked (sensory scores ranging from 4.72 to 7.62). Desirable biophysical targets were between 5.1 and 7.1 N for penetration force, dry matter around 39% and sugar intensity below 3.62 g 100 g-1 . Some improved varieties fulfilled the acceptable thresholds, and screening was improved through deviation from the optimum. CONCLUSION: Acceptance thresholds and deviation from optimum for boiled yam assessed through the instrumental measurements are promising tools for yam breeders. © 2023 The Authors. Journal of The Science of Food and Agriculture published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry.

Antioxidant, enzymes inhibitory, physicochemical and sensory properties of instant bio-yoghurts containing multi-purpose natural additives.

This study aimed to assess the antioxidant, enzyme inhibitory, physicochemical and sensory properties of instant bio-yoghurts containing multi-purpose natural additives. Multi-purpose natural additives were formulated with three natural additives (sweet detar seed, ginger rhizome, and hibiscus calyx flours, as a thickener, flavourant and colourant, respectively) blends at proportions derived from the Design Expert. The additives' synthetic counterparts were formulated with sodium carboxymethylcellulose, vanilla flavor, and red colourant at the same proportions. After that, yoghurt was produced and the additives blends were incorporated into it either in aqueous extract or flour form, yielding bio-yoghurts designated multi-purpose natural additive extract-containing yoghurt (MNAE-yoghurt), multi-purpose natural additive flour-added yoghurt (MNAF-yoghurt), and their multi-purpose synthetic additives-containing counterparts (MSAE-yoghurt and MSAF-yoghurt). A commercially-available bio-yoghurt served as a control. All the yoghurts were lyophilized to obtain instant bio-yoghurts. Subsequently, bioactive components (total phenolics, tannins, total flavonoids and saponins), antioxidants and enzymes [alpha-amylase, alpha-glucosidase, pancreatic lipase, and angiotensin 1-converting enzyme (ACE)] inhibitory activities, as well as proximate, physicochemical and sensory qualities of the bio-yoghurts were determined. The MNAE-yoghurt and MNAF-yoghurt had higher bioactive constituents, total titratable acid levels, and more potent antioxidant and enzyme inhibitory properties, but a lower pH than their synthetic counterparts and the control. The total phenolics, tannins, total flavonoids and saponins levels of MNAE-yoghurt and MNAF-yoghurt were 14.40 ± 0.24 and 16.54 ± 0.62 mg/g, 1.65 ± 0.04 and 1.74 ± 0.08 mg/g, 4.25 ± 0.03 and 4.40 ± 0.02 mg/g, 0.64 ± 0.01 and 0.66 ± 0.02 mg/g, respectively. Among the natural multi-purpose additives-containing bio-yoghurts, MNAF-yoghurt had higher bioactive constituents and stronger antioxidant and enzymes inhibitory properties. Its α-amylase, α-glucosidase, ACE, and pancreatic lipase IC50 values were 72.47 ± 0.47, 74.07 ± 0.02, 25.58 ± 2.58, and 33.56 ± 29.66 µg/mL, respectively. In contrast, MNAE-yoghurt had the highest protein (13.70 ± 0.85%) and the lowest fat (2.63 ± 0.71%) contents. The sensory attributes of all the bio-yoghurts fell within an acceptable likeness range. Overall, the inclusion of multi-purpose natural additives blends enhanced the instant bio-yoghurts' nutritional, health-promoting, and sensory qualities.

Assessment of biochemical, cooking, sensory and textural properties of the boiled food product of white yam (D. rotundata) genotypes grown at different locations.

Specific biochemical properties and textural attributes determine the final quality and acceptability of yam food products. This study assessed the flour and cooking qualities (boiled yam) of sixteen elite white yam genotypes (D. rotundata) grown in three locations. Fresh yam samples were cut into regular-shaped pieces and boiled using the standard procedure. Sub-samples were oven-dried at 65 °C for 72 h and milled to flour. The biochemical profiling for the yam flour showed, on average, 61.35 ± 5.15% starch, 5.35 ± 0.15% sugar, 1.55 ± 0.24% crude fiber, 1.91 ± 0.31% ash, 5.65 ± 0.66% protein, 0.33 ± 0.02% fat and 34.87 ± 1.94% amylose content. The boiled yam's water absorption and cooking time ranged from 0.35 to 5.17% and 7.00-18 min, with an average of 2.74% and 10.64 min, respectively. The hardness of boiled yam from the sensory assay correlated positively with the hardness of instrumental texture analysis (p < 0.001, r = 0.47). In contrast, the hardness of instrumental texture had a significant negative correlation with the chewiness of sensory profile analysis (p < 0.05, r = 0.37). Likewise, water absorption correlated positively and significantly (p < 0.05, r = 0.43) with the chewiness of the sensory analysis. The study shows that the sensory attributes that determine the acceptability of boiled yam could be determined using instrumental measurements to save time and cost.

Predicting starch content in cassava fresh roots using near-infrared spectroscopy.

The cassava starch market is promising in sub-Saharan Africa and increasing rapidly due to the numerous uses of starch in food industries. More accurate, high-throughput, and cost-effective phenotyping approaches could hasten the development of cassava varieties with high starch content to meet the growing market demand. This study investigated the effectiveness of a pocket-sized SCiO™ molecular sensor (SCiO) (740-1070 nm) to predict starch content in freshly ground cassava roots. A set of 344 unique genotypes from 11 field trials were evaluated. The predictive ability of individual trials was compared using partial least squares regression (PLSR). The 11 trials were aggregated to capture more variability, and the performance of the combined data was evaluated using two additional algorithms, random forest (RF) and support vector machine (SVM). The effect of pretreatment on model performance was examined. The predictive ability of SCiO was compared to that of two commercially available near-infrared (NIR) spectrometers, the portable ASD QualitySpec® Trek (QST) (350-2500 nm) and the benchtop FOSS XDS Rapid Content™ Analyzer (BT) (400-2490 nm). The heritability of NIR spectra was investigated, and important spectral wavelengths were identified. Model performance varied across trials and was related to the amount of genetic diversity captured in the trial. Regardless of the chemometric approach, a satisfactory and consistent estimate of starch content was obtained across pretreatments with the SCiO (correlation between the predicted and the observed test set, (R2 P): 0.84-0.90; ratio of performance deviation (RPD): 2.49-3.11, ratio of performance to interquartile distance (RPIQ): 3.24-4.08, concordance correlation coefficient (CCC): 0.91-0.94). While PLSR and SVM showed comparable prediction abilities, the RF model yielded the lowest performance. The heritability of the 331 NIRS spectra varied across trials and spectral regions but was highest (H2 > 0.5) between 871-1070 nm in most trials. Important wavelengths corresponding to absorption bands associated with starch and water were identified from 815 to 980 nm. Despite its limited spectral range, SCiO provided satisfactory prediction, as did BT, whereas QST showed less optimal calibration models. The SCiO spectrometer may be a cost-effective solution for phenotyping the starch content of fresh roots in resource-limited cassava breeding programs.

Characterization of macro and micro-minerals in cassava leaves from genotypes planted in three different agroecological locations in Nigeria.

Diversity in the mineral composition of cassava leaves bred in sub-Saharan Africa has not been fully investigated. This study characterized macro and micro-minerals in 400 genotypes of Cassava leaves planted in three different agroecological environments in Nigeria. Laboratory analysis of the leaves was done using an Inductively Coupled Optical Emission Spectrometer. Across all three locations sampled in this study, the iron content ranged from 43 to 660 mg/kg, zinc from 16 to 440 mg/kg, Manganese 16-61mg/kg, Copper 0.7-14 mg/kg, Aluminum 5.3-630 mg/kg. Among the macro elements, Calcium ranged from 3600 to 17600 mg/kg, Magnesium 1760-6500 mg/kg, Sodium 0.4-720 mg/kg, Potassium 3100-27000 mg/kg. When the location effect was tested, there was a significant difference among the genotypes for all elements. Cluster analysis resulted in five clusters containing 187, 147, 60, 2, and 4 genotypes, respectively. Cluster 2 contained eight varieties (01/0046, 94/0020, 93/0098, 88/112-7(3X), I00/0017, 91/00417, I00/0017, 88/112-7(3X)) that possessed the highest mineral compositions in Fe, Al, Ti, Na, K, S, Mn, and B, respectively. Genotypes 93/0681(4X), 92/0430, and 95/0460 in cluster 3 had the highest concentrations of Mg, Na, and Zn, respectively. The correlation results showed a notable positive relationship among iron with zinc, copper, aluminum, and titanium (r = 0.33, 0.39, 0.48, and 0.56, respectively), zinc with nickel, titanium, and sulphur (r = 0.52, 0.3,2 and 0.51, respectively) while calcium negatively correlated with potassium (r = ‒ 0.31), phosphorus (r = ‒0.41). This study provides evidence that genotypic diversity exists for mineral composition in cassava leaves and, therefore, can be exploited for genetic improvement by breeders seeking solutions to reduce persistent mineral deficiencies in sub-Saharan Africa.

Influence of traditional processing and genotypes on the antioxidant and antihyperglycaemic activities of yellow-fleshed cassava.

Yellow-fleshed cassava root (YFCR) is processed into traditional products that may influence its bioactivities. In this study, the antioxidant and anti-hyperglycaemic activities of three traditional products (lafun, fufu and gari) from five genotypes (IITA-TMS-IBA070337, 182961, 182962, 182986, 183044) of YFCR were evaluated. The YFCR genotypes were grown at the International Institute of Tropical Agriculture (IITA) research field, Ibadan. The bioactive constituents (total carotenoids, total phenolics, tannins and total flavonoids), antioxidant [2,2-azinobis (3-ethyl-benzothiazoline-6-sulfonic acid) radical cation (ABTS•+) and 1,1-diphenyl-2- picrylhydrazyl radical (DPPH•) scavenging capacities, and reducing power], and starch-digesting enzymes (α-amylase and α-glucosidase) inhibitory activities of the products were determined using standard laboratory methods. The glucose response of the products was assessed in human subjects. The concentrations of the bioactive constituents of the products from different genotypes varied significantly (p < 0.05). The ABTS•+ and DPPH• scavenging capacities and the reducing power of the products also differed significantly (p < 0.05), such that the lafun from IITA-TMS-IBA182962, IITA-TMS-IBA070337 and IITA-TMS-IBA070337 had the strongest ABTS•+ and DPPH• scavenging capacities, and reducing power, respectively. The α-amylase and α-glucosidase inhibitory activities of the three products differed significantly (p < 0.05), with the lafun from IITA-TMS-IBA070337 and IITA-TMS-IBA07033 having the strongest α-amylase and α-glucosidase inhibitory activity, respectively. Also, the lafun from IITA-TMS-182986 had the least glucose response, while the fufu from IITA-TMS-IBA070337 had the highest glucose response. Overall, the lafun from different genotypes of YFCR had the most potent antioxidant and starch-digesting enzymes inhibitory activities and the least glucose responses. Hence, lafun may be a promising dietary intervention targeting oxidative stress, hyperglycaemia, and their resultant type 2 diabetes.

Near-Infrared Reflectance Spectrophotometry (NIRS) Application in the Amino Acid Profiling of Quality Protein Maize (QPM).

The accurate quantification of amino acids in maize breeding programs is challenging due to the high cost of analysis using High-Performance Liquid Chromatography (HPLC) and other conventional methods. Using the Near-Infrared Spectroscopic (NIRS) method in breeding to screen many genotypes has proven to be a fast, cost-effective, and non-destructive method. Thus, this study aimed to develop and apply the NIRS prediction models for quantifying amino acids in biofortified quality protein maize (QPM). Sixty-three (63) QPM maize genotypes were used as the calibration set, and another twenty (20) genotypes were used as the validation set. The microwave hydrolysis system coupled with post-column derivatization with 6-amino-quinoline-succinimidyl-carbamate as the derivatization reagent and the HPLC method were used to generate the reference data set used for the calibration development. The calibration models were developed for essential and non-essential amino acids using WINSI Foss software. Good coefficients of determination in calibration (R2cal) of 0.91, 0.93, 0.93, and 0.91 and low standard errors in calibrations (SEC) of 0.62, 0.71, 0.26, and 1.75 were obtained for glutamic acids, alanine, proline, and leucine, respectively, while aspartic acids, serine, glycine, arginine, tyrosine, valines, and phenylalanine had fairly good R2Cal values of 0.86, 0.71, 0.81, 0.78, 0.68, 0.79, and 0.75. In contrast, poor (R2cal) was obtained for histidine (0.07), cystine (0.09), methionine (0.09), lysine (0.20), threonine (0.51), and isoleucine (0.09), respectively. The models' prediction performances (R2pred) and standard error of prediction (SEP) were reasonably good for certain amino acids such as aspartic acid (0.90), glycine (0.80), arginine (0.94), alanine (0.90), proline (0.80), tyrosine (0.83), valine (0.82), leucine (0.90), and phenylalanine (0.88) with SEP values of 0.24, 0.39,0.24, 0.93, 0.47,0.34, 0.78, 2.20, and 0.77, respectively. However, certain amino acids had their R2pred below 0.50, which could be improved to become useful for screening purposes for those amino acids. Further work is recommended by including a training set representing the sample population's variance to improve the model's performance.

Relationship between quality attributes of backslopped fermented gari and the sensory and instrumental texture profile of the cooked dough (eba).

Knowledge is scarce on the drivers of textural characteristics of cooked dough prepared from gari (eba). To address this need, quality attributes of backslopped fermented gari (BFG) were correlated with the sensory texture profile analysis (STPA) and instrumental texture profile analysis (ITPA) of the eba produced from six cassava varieties. The results showed that a significant and negative correlation exists between the STPA mouldability of the eba and the sugar (p < .05, r = -0.83) and amylose (p < .05, r = -0.86) contents of the BFG. The STPA stretchability of the eba had a significant negative correlation with the bulk density (p < .05, r = -0.83) and a significant positive correlation with the setback viscosity (p < .01, r = 0.92) of the BFG. A significant and negative correlation exists between the STPA stickiness of the eba and the amylose (p < .05, r = -0.84) contents of the BFG. The ITPA adhesiveness of the eba was significant and negatively correlated with the solubility index (p < .05, r = -0.89) and the ash content (p < .05, r = -0.87) of the BFG. The correlation between the ITPA stretchability of the eba and the peak (p < .05, r = 0.83) and breakdown (p < .05, r = 0.88) viscosities of the BFG was significant and positive, while a significant negative correlation (p < .05, r = -0.83) exist between the ITPA stretchability of the eba and the starch content of the BFG. The information provided in this study may assist the breeders in developing varieties with good textural attributes for eba. Practical applications: This study depicts the relationship between the quality attributes of backslopped fermented gari (BFG) and the sensory and instrumental texture profile of the cooked dough (eba). Both the sensory and the instrumental texture attributes of the eba have correlation with the quality attributes of the BFG. Apart from providing information on the drivers of the textural characteristics of eba, this study may also assist the breeders in developing varieties with good textural attributes for eba.

Datasets on the variations of minerals in biofortified cassava ( Manihot esculenta Crantz) as a function of storage root portion, maturity and environment.

Background: The accurate measurements of the mineral content of cassava roots are vital from a nutritional perspective. The research datasets were from the study assessing the influence of storage root portion, maturity, and environment on the variations of minerals in biofortified cassava roots. Methods: Twenty-five biofortified clones with three varieties as checks were harvested 12 months after planting from five different environments. Also,  a different thirty-nine (39) biofortified cassava clones from the unlimited yield trials (UYTs) that included five (5) white-fleshed varieties (as control) were harvested at the age of 9 and 12 months after planting. In addition, two different methods of sample preparations were employed, using a cork borer and without a cork borer. The samples' elemental (minerals) analysis was determined using a standard laboratory method. Results and conclusion: The breeders could use the data in their biofortification cassava programs to know the distribution of minerals in the roots and identify the best promising pipelines. Also, the data could be used by food scientists and nutritionists to understand the parts of the roots with optimum minerals to design their processing protocols and to know those genotypes specific to different environments that could be used for various nutrition intervention programs.

Assessment of Functional and Pasting Properties of Fresh Orange Maize Hybrids and Open-Pollinated Varieties as Influenced by Genotype, Harvesting Time, and Growing Location.

The study evaluates the effects of genotype, maturity, and growing location on the functional and pasting properties of freshly harvested orange maize hybrids and open-pollinated varieties (OPVs). Eight fresh orange maize hybrid and eight fresh maize OPV, including the control, were harvested at three stages: 20, 27, and 34 days after planting (DAP). The freshly harvested maize samples were lyophilized and characterized for the pasting and functional properties using standard laboratory methods. The peak viscosity, final viscosity, and swelling power of the OPVs increased between 20 and 27 DAP. Additionally, the water absorption capacity increased between 20 and 27 DAP for the maize hybrids, with a decreasing trend between 27 and 34 DAP. However, genotypes 2, from the orange maize hybrid, and 5, amongst the OPV, were outstanding with the highest peak viscosities, indicating good final product quality. The combined ANOVA for the fresh orange maize hybrid and OPV showed a highly significant effect (p ≤ 0.01 and p ≤ 0.001) for the maturity and location on the pasting and functional properties except for the pasting temperature, final viscosity, and pasting time which showed no significant effect. In contrast, the location by genotypes by maturity interactions had no significant effects on the pasting and functional properties of the fresh maize hybrid and the orange OPV except only for the setback, which was highly significant at p ≤ 0.001. Nutritionists, food scientists, and maize breeders could use the information from this study to select the best maize genotypes at the appropriate harvesting period suitable for the production of the preferred maize-based products of consumers.

Antioxidant and Starch-Hydrolyzing Enzymes Inhibitory Properties of Striga-Resistant Yellow-Orange Maize Hybrids.

Most of the health benefits derived from cereals are attributed to their bioactive compounds. This study evaluated the levels of the bioactive compounds, and the antioxidant and starch-hydrolyzing enzymes inhibitory properties of six pipeline Striga-resistant yellow-orange maize hybrids (coded AS1828-1, 4, 6, 8, 9, 11) in vitro. The maize hybrids were grown at the International Institute of Tropical Agriculture (IITA), Nigeria. The bioactive compounds (total phenolics, tannins, flavonoids, and phytate) levels, antioxidant (DPPH• and ABTS•+ scavenging capacity and reducing power) and starch-hydrolyzing enzymes (α-amylase and α-glucosidase) inhibitory activities of the maize hybrids were determined by spectrophotometry. At the same time, carotenoids were quantified using a reverse-phase HPLC system. The ranges of the bioactive compounds were: 11.25-14.14 mg GAE/g (total phenolics), 3.62-4.67 mg QE/g (total flavonoids), 3.63-6.29 mg/g (tannins), 3.66-4.31% (phytate), 8.92-12.11 µg/g (total xanthophylls), 2.42-2.89 µg/g (total ß-carotene), and 3.17-3.77 µg/g (total provitamin A carotenoids). Extracts of the maize hybrids scavenged DPPH• (SC50: 9.07-26.35 mg/mL) and ABTS•+ (2.65-7.68 TEAC mmol/g), reduced Fe3+ to Fe2+ (0.25 ± 0.64-0.43 ± 0.01 mg GAE/g), and inhibited α-amylase and α-glucosidase, with IC50 ranges of 26.28-52.55 mg/mL and 47.72-63.98 mg/mL, respectively. Among the six clones of the maize hybrids, AS1828-9 had the highest (p < 0.05) levels of tannins and phytate and the strongest antioxidant and starch-hydrolyzing enzymes inhibitory activities. Significant correlations were observed between total phenolics and the following: ABTS•+ (p < 0.01, r = 0.757), DPPH• SC50 (p < 0.01, r = -0.867), reducing power (p < 0.05, r = 0.633), α-amylase IC50 (p < 0.01, r = -0.836) and α-glucosidase IC50 (p < 0.05, r = -0.582). Hence, the Striga-resistant yellow-orange maize hybrids (especially AS1828-9) may be beneficial for alleviating oxidative stress and postprandial hyperglycemia.

Impact of type and level of stabilizers and fermentation period on the nutritional, microbiological, and sensory properties of short-set Yoghurt.

This study aimed to produce short set yoghurt with different stabilizers at different concentrations and determine the effects of the stabilizers and length of fermentation on the nutritional, microbiological, and sensory properties of short set yoghurt. Stabilized yoghurt samples were produced using 0%, 0.5%, and 1.0% concentrations of carboxyl methylcellulose (CMC), corn starch, and gum acacia with different fermentation periods (1-5 hr), respectively. Samples were analyzed for the proximate, physicochemical, microbial, and sensory properties using standard laboratory methods. Results showed that an increase in stabilizer concentration and fermentation time decreased the moisture content but increased the total solids, protein, fat, ash, sugars, pH level, and total titratable acidity. The viscosity of the yoghurt samples significantly (p < .05) increased with the addition of stabilizers (1.48 ± 0.03 cP to 275.57 ± 4.08 cP), with CMC having the highest increase (p < .05) and gum acacia the least. However, the lactic acid production reduced as the concentration of stabilizers increased but showed an increase with fermentation time. The total viable count (TVC) reduced significantly (p < .05) with an increase in the concentration of stabilizer and fermentation time. Hence, short set yoghurt samples containing CMC yielded highest protein (0.5%), fat (1.0%), and ash contents (1.0%). Yoghurt samples produced with a 1.0% concentration of gum acacia gave an optimum pH (0.5%), TTA, mouthfeel, appearance, flavor, and taste. In contrast, yoghurt produced with corn starch produced the most desirable overall acceptability, viscosity, total solids at 1.0%, and TVC (at 0.5%) concentration.