ABSTRACT
This paper aims to estimate the permeability of concrete by replacing the laboratory tests with robust machine learning (ML)-based models. For this purpose, the potential of twelve well-known ML techniques was investigated in estimating the water penetration depth (WPD) of nano natural pozzolana (NNP)-reinforced concrete based on 840 data points. The preparation of concrete specimens was based on the different combinations of NNP content, water-to-cement (W/C) ratio, median particle size (MPS) of NNP, and curing time (CT). Comparing the results estimated by the ML models with the laboratory results revealed that the hist-gradient boosting regressor (HGBR) and K-nearest neighbors (KNN) algorithms were the most and least robust models to estimate the WPD of NNP-reinforced concrete, respectively. Both laboratory and ML results showed that the WPD of NNP-reinforced concrete decreased with the increase of the NNP content from 1 to 4%, the decrease of the W/C ratio and the MPS, and the increase of the CT. To further aid in the estimation of concrete's WPD for engineering challenges, a graphical user interface for the ML-based models was developed. Proposing such a model may be effectively employed in the management of concrete quality.
ABSTRACT
Combined cooling, heating and power (CCHP) is one of methods for enhancing the efficiency of the energy conversion systems. In this study a CCHP system consisting of a gas turbin (GT) as the topping cycle, and an organic Rankine cycle (ORC) associated with double-effect absorbtion chiller (DEACH) is decisioned as the bottoming cycle to recover the waste heat from GT exhaust gas. The considered CCHP system is investigated to maintain electricity, heating and cooling demand of a town. A parametric study is investigated and the effect decision variables on the performance indicators including exergy efficiency, total cost rate (TCR), cooling capacity, and ORC power generation is examined. Decision variables of the ORC system consist of HRVG pressure, and condenser pressure and the DEACH including evaporator pressure, condseser pressure, concentration of the concentrated solution, concentration of the weak solution, and solution mass flow rate. Finally a multi-objective optimization performed using Genetic Algorithm (GA) and the optimal design point is selected. It is observed at the optimum point the exergy efficiency, TCR, and sustainability index are 17.56%, 74.49 $/h, and 1.21, respectively.