Evaluation of mechanical properties of anatomically customized fiber posts using E-glass short fiber-reinforced composite to restore weakened endodontically treated premolars.

OBJECTIVE: This study was conducted to assess the influence of combining different forms of fiber-reinforced composites (FRC) on the mechanical behavior and bond strength of compromised endodontically treated teeth (ETT). MATERIALS AND METHODS: Eighty extracted human premolar teeth were randomly divided into five experimental groups according to the type of intra-radicular restoration and the canal preparation design which was either non-flared (Group 1), flared (Groups 2-5), closed-apex (Groups 1,3,5) or open-apex (Groups 2,4). Standard prefabricated fiber posts were used as intra-radicular restoration for Groups 1-3 while Groups 4-5 were restored with anatomically customized relined fiber posts. After composite core fabrication, all samples were sent for an artificial aging process. Fracture resistance and push-out bond strength tests were then carried out through a universal testing machine followed by mode of failure analysis via a stereomicroscope and scanning electron microscope. RESULTS: Pairwise Log-Rank comparisons revealed that the survival rate of Group 2 and Group 3 was significantly lower than all other groups after artificial aging. The highest fracture resistance value (1796 N) was recorded in Group 5 and was significantly higher than that of the other groups (p < 0.05), while Group 2 exhibited the lowest fracture resistance (758 N), which was significantly lower compared to the other groups. Group 5 and Group 4 demonstrated a significantly higher push-out bond strength, at all root thirds, than Group 3, Group 2, and Group 1 (p < 0.05). The most frequently observed failure mode in the tested groups occurred between the resin cement and radicular dentin. CONCLUSION: The use of short fiber-reinforced composite (SFRC) to reline the prefabricated FRC post has been proven to have superior fracture resistance with favorable failure patterns and increased push-out bond strength values compared to standard prefabricated FRC posts.

Construction of Custom Ocular Prosthesis With Reduced Number of Visits: A Case Report.

Construction of an ocular or eye prosthesis can be challenging, as it is a cosmetic device. It needs good communication between dentists and maxillofacial technicians. The construction process normally requires multiple appointments, which involve at least four visits starting with ocular impression to insertion of the prosthesis. This article will outline the clinical step and propose a clinical technique to reduce the number of appointments from four to three appointments, which would benefit both the patient and practitioner.

Effects of Fiber Loading on Mechanical Properties of Kenaf Nanocellulose Reinforced Nanohybrid Dental Composite Made of Rice Husk Silica.

The innovation of nanocellulose as reinforcement filler in composites has been a topic of interest in the development of new biomaterials. The objective of this study was to investigate the mechanical properties of a nanohybrid dental composite made of rice husk silica and loaded with different percentages of kenaf nanocellulose. Kenaf cellulose nanocrystals (CNC) were isolated and characterized using a transmission electron microscope (TEM) (Libra 120, Carl Zeiss, Germany). The experimental composite was fabricated with fiber loadings of 1 wt%, 2 wt%, 3 wt%, 4 wt%, and 6 wt% silane-treated kenaf CNC, and subjected to a flexural and compressive strength test (n = 7) using an Instron Universal Testing Machine (Shimadzu, Kyoto, Japan), followed by a scanning electron microscopic assessment of the flexural specimen's fracture surface using a scanning electron microscope (SEM) (FEI Quanta FEG 450, Hillsborough, OR, USA). Commercial composites Filtek Z350XT (3M ESPE, St. Paul, MN, USA), Neofil (Kerr Corporation, Orange, CA, USA) and Ever-X Posterior (GC Corporation, Tokyo, Japan) were used as a comparison. The average diameter of kenaf CNC under TEM was 6 nm. For flexural and compressive strength tests, one-way ANOVA showed a statistically significant difference (p < 0.05) between all groups. Compared to the control group (0 wt%), the incorporation of kenaf CNC (1 wt%) into rice husk silica nanohybrid dental composite showed a slight improvement in mechanical properties and modes of reinforcement, which was reflected in SEM images of the fracture surface. The optimum dental composite reinforcement made of rice husk was 1 wt% kenaf CNC. Excessive fiber loading results in a decline in mechanical properties. CNC derived from natural sources may be a viable alternative as a reinforcement co-filler at low concentrations.

Oral Rehabilitation of a Patient With Generalized Inflammatory Gingival Overgrowth Exacerbated by Felodipine: A Case Report.

Gingival enlargement may manifest as a side effect of medications (calcium channel blockers, anticonvulsants, or immunosuppressants) and may be associated with inflammation, malignancy, or genetic inheritance. This condition has a significant impact on a patient's quality of life and affects their oral health status. This case report describes the management of a 68-year-old gentleman who presented with generalized gingival enlargement and chronic periapical abscess originating from tooth 34, which served as an abutment for a fixed partial prosthesis. The patient's medical history revealed that felodipine, an antihypertensive medication, was prescribed to him. A comprehensive treatment plan was developed to improve the patient's quality of life.

Evaluation of Microleakage Between Different Post and Core Systems Under Gradual Loading: an In-Vitro Study.

OBJECTIVE: This study aimed to compare the difference in marginal dye penetration between everStick, Parapost XP, Parapost fiber white and control groups under gradual loading. MATERIALS AND METHODS: Sixty-eight human maxillary permanent incisors were divided into four groups. Each specimen was endodontically treated with step-back technique and prepared for each post system according to experimental groups, subsequently cemented in the canal. Composite resin cores were built and laboratory fabricated metal crowns were cemented. All specimens except those in the control group were subjected to thermal cycling. All groups were subjected to gradual loading from 0N-50N for 100 cycles. Specimens were sectioned transversely and the depths of dye penetration along the post were measured. Data were entered in SPSS ver. 22 and analyzed using two-way ANOVA test. RESULTS: There was no significant difference in marginal dye penetration between each group (p-value>0.05). However, there was a significant difference in percentage of marginal dye penetration between all groups (p-value<0.05); post-hoc comparison showed significant difference between Fiber White and Control groups (p-value=0.009). CONCLUSION: All the groups showed dye penetration but the percentage was significant only between Parapost Fiber White and the control groups.

Intracanal Adaptation of a Fiber Reinforced Post System as Compared to a Cast Post-and-Core.

BACKGROUND: The purpose of this study was to compare the adaptation of fiber reinforced composite post system and cast post-and-core. METHODS: 17 extracted human permanent maxillary central incisors were endodontically treated following the standard protocol. 17 fiber reinforced composite post had been fabricated and adapted to the prepared parallel root canals. A light body poly vinyl siloxane (EXAMIX NDS, Japan) impression material was inserted into the root canals followed by the post. A digital scale was used to measure the weight of the remaining material that filled the gap between the post and the canal wall. The adaptation was indicated by the weight difference before and after impression material insertion. The same procedures were repeated with 17 cast post-and-core in the same teeth specimens. RESULT: The mean difference for the weight of the material within the group was statistically significant (P-value <0.001) with the value of 6.1mg(± 2.7mg) for cast metal post and 6.4mg(± 2.7mg) for fiber reinforced composite post. However, the mean difference was not statistically significant when compared with both materials (P-value>0.05). CONCLUSIONS: Both cast post-and-core and fiber reinforced composite post systems showed similar adaptation to the canal.