Microphysiological Modeling of Gingival Tissues and Host-Material Interactions Using Gingiva-on-Chip.

Gingiva plays a crucial barrier role at the interface of teeth, tooth-supporting structures, microbiome, and external agents. To mimic this complex microenvironment, an in vitro microphysiological platform and biofabricated full-thickness gingival equivalents (gingiva-on-chip) within a vertically stacked microfluidic device is developed. This design allowed long-term and air-liquid interface culture, and host-material interactions under flow conditions. Compared to static cultures, dynamic cultures on-chip enabled the biofabrication of gingival equivalents with stable mucosal matrix, improved epithelial morphogenesis, and barrier features. Additionally, a diseased state with disrupted barrier function representative of gingival/oral mucosal ulcers is modeled. The apical flow feature is utilized to emulate the mechanical action of mouth rinse and integrate the assessment of host-material interactions and transmucosal permeation of oral-care formulations in both healthy and diseased states. Although the gingiva-on-chip cultures have thicker and more mature epithelium, the flow of oral-care formulations induced increased tissue disruption and cytotoxic features compared to static conditions. The realistic emulation of mouth rinsing action facilitated a more physiological assessment of mucosal irritation potential. Overall, this microphysiological system enables biofabrication of human gingiva equivalents in intact and ulcerated states, providing a miniaturized and integrated platform for downstream host-material and host-microbiome applications in gingival and oral mucosa research.

The MainSTREAM component platform: a holistic approach to microfluidic system design.

A microfluidic component library for building systems driving parallel or serial microfluidic-based assays is presented. The components are a miniaturized eight-channel peristaltic pump, an eight-channel valve, sample-to-waste liquid management, and interconnections. The library of components was tested by constructing various systems supporting perfusion cell culture, automated DNA hybridizations, and in situ hybridizations. The results showed that the MainSTREAM components provided (1) a rapid, robust, and simple method to establish numerous fluidic inputs and outputs to various types of reaction chips; (2) highly parallel pumping and routing/valving capability; (3) methods to interface pumps and chip-to-liquid management systems; (4) means to construct a portable system; (5) reconfigurability/flexibility in system design; (6) means to interface to microscopes; and (7) compatibility with tested biological methods. It was found that LEGO Mindstorms motors, controllers, and software were robust, inexpensive, and an accessible choice as compared with corresponding custom-made actuators. MainSTREAM systems could operate continuously for weeks without leaks, contamination, or system failures. In conclusion, the MainSTREAM components described here meet many of the demands on components for constructing and using microfluidics systems.

HistoFlex--a microfluidic device providing uniform flow conditions enabling highly sensitive, reproducible and quantitative in situ hybridizations.

A microfluidic device (the HistoFlex) designed to perform and monitor molecular biological assays under dynamic flow conditions on microscope slide-substrates, with special emphasis on analyzing histological tissue sections, is presented. Microscope slides were reversibly sealed onto a cast polydimethylsiloxane (PDMS) insert, patterned with distribution channels and reaction chambers. Topology optimization was used to design reaction chambers with uniform flow conditions. The HistoFlex provided uniform hybridization conditions, across the reaction chamber, as determined by hybridization to microscope slides of spotted DNA microarrays when applying probe concentrations generally used in in situ hybridization (ISH) assays. The HistoFlex's novel ability in online monitoring of an in situ hybridization assay was demonstrated using direct fluorescent detection of hybridization to 18S rRNA. Tissue sections were not visually damaged during assaying, which enabled adapting a complete ISH assay for detection of microRNAs (miRNA). The effects of flow based incubations on hybridization, antibody incubation and Tyramide Signal Amplification (TSA) steps were investigated upon adapting the ISH assay for performing in the HistoFlex. The hybridization step was significantly enhanced using flow based incubations due to improved hybridization efficiency. The HistoFlex device enabled a fast miRNA ISH assay (3 hours) which provided higher hybridization signal intensity compared to using conventional techniques (5 h 40 min). We further demonstrate that the improved hybridization efficiency using the HistoFlex permits more complex assays e.g. those comprising sequential hybridization and detection of two miRNAs to be performed with significantly increased sensitivity. The HistoFlex provides a new histological analysis platform that will allow multiple and sequential assays to be performed under their individual optimum assay conditions. Images can subsequently be recorded either in combination or sequentially through the ability of the HistoFlex to monitor assays without disassembly.

Selective determination of aloin in different matrices by HPTLC densitometry in fluorescence mode.

A novel method based on the fluorescence excited solely on aloin by a H3BO3 derivatizing procedure, allowed its rapid and selective determination among the co-occurring components in a variety of complex matrices as several Aloes dried extracts and related commercial products. HPTLC LiChrospher silica gel 60 F254S, 20 cm x 10 cm, plates with ethyl formate: CH3OH:H2O (100:14.5:10, v/v) as the mobile phase were used. Densitometric determinations were performed in fluorescence mode, exciting wavelength 365 nm, optical filter K540 after derivatization with H3BO3. The method was validated giving rise to a dependable and high throughput procedure well suited to routine application. Aloin was quantified in the range of 110-330 ng with RSD of repeatability and intermediate precision not exceeding 2.3% and accuracy inside the acceptance limits.

High throughput headspace GC-MS quantitative method to measure the amount of carbon monoxide in treated tuna fish.

A robust and dependable headspace HS-GC-MS method has been developed for the determination of carbon monoxide (CO) treated tuna fish. The performance of the method has been evaluated by analyzing spiked and blank samples. The proposed method uses a programmed temperature vaporizing (PTV) injector to implement the HS injection and overcome the negative effects on the column of water contained in the sample. The level of CO could be easily detected in the treated samples, its amount differing markedly from that detected in the untreated samples. Proper oven temperature programming prevented any deterioration of chromatographic performance caused by the accumulation of water, carbon dioxide and other low molecular weight hydrocarbons in the column during serial analyses. The introduction of PTV injection and the restoring of GC column, by oven temperature programming, were crucial for obtaining the required robustness. This procedure assures the run-to-run repeatability necessary for high throughput applications. The method affords linear calibration curves ranging from 50 to 2500 ng/g of CO content in tuna sample.

Physico-chemical and structural characterization of diacerhein.

The physico-chemical and structural characterization of diacerhein, an anthraquinone with antiinflammatory activity, employed in the symptomatic treatment of inflammatory osteoarthritis, is reported. The combined use of FT-IR, DSC, X-ray powder and single-crystal diffraction has provided a valuable tool to fully characterize the title compound. The X-ray diffraction study has revealed the existence of hydrogen-bond assisted tight packing of the quasi-planar molecules in the solid. The collected results are intended to implement the information required for the compilation of drug master files.

Validation of a reversed phase high performance thin layer chromatographic-densitometric method for secoisolariciresinol diglucoside determination in flaxseed.

The validation of a HPTLC-densitometric method for the determination of secoisolariciresinol diglucoside (SDG) in flaxseed was performed improving the reproducibility of a previously reported HPTLC densitometric procedure by the use of fully wettable reversed phase plates (silica gel 60 RP18W F(254S), 10cmx10cm) with MeOH:HCOOH 0.1% (40:60, v/v) mobile phase. The analysis required only the alkaline hydrolysis in aqueous medium of undefatted samples and densitometry at 282nm of HPTLC runs. The method was validated following the protocol proposed by the Société Francaise des Sciences et Techniques Pharmaceutiques (SFSTP) giving rise to a dependable and high throughput procedure well suited to routine application. SDG was quantified in the range of 321-1071ng with RSD of repeatability and intermediate precision not exceeding 3.61% and accuracy inside the acceptance limits. Flaxseed of five cultivars of different origin was elected as test-bed.

3-Methyl-1,4-dioxo-1,4-dihydro-naphthalen-2-yl 4-amino-benzoate.

The crystal structure of the title compound, C(18)H(13)NO(4), the oxidized form of the drug aminaftone used in venous disease therapy, is characterized by the presence of ribbons of hydrogen-bonded mol-ecules parallel to the [111] crystallographic direction and by stacking inter-actions between rings [centroid-centroid distance between quinone rings = 3.684 (3) Šand between amino-benzoate rings = 4.157 (3) Å] along the ribbons.

Diisoprop-yl{2-[2-(2-oxopyrrolidin-1-yl)acetamido]eth-yl}ammonium hydrogen sulfate.

The structure of the title compound, C(14)H(28)N(3)O(2) (+)·HSO(4) (-), a nootropic drug (pramiracetam) investigated for cognition-enhancing properties, is closely similar to that of the previously determined acetonitrile solvate, both structures being characterized by the presence of ribbons of hydrogen-bonded ions. The pyrrolidine ring adopts an envelope conformation.

A convenient route to the synthesis of isotopomeric dihydro-2(3H)furanones.

A general synthetic procedure leading to isotopomeric dihydro-2(3H)furanones (gamma-butyrolactones) containing two, four, or six deuterium atoms has been developed. The labeled dihydro-2(3H)furanones were synthesized in quantitative yield from the saturated diacid C4 (succinic) or unsaturated diacids C4 (fumaric, maleic, or acetylendicarboxylic) in the presence of Ru4H4(CO)8(PBu3)4 using a deuterium pressure of 180 bar at 180 degrees C. This methodology was applied to the total synthesis of a hexadeuterated matairesinol lignan: The 3,4-bis[[3-methoxy-4-(phenylmethoxy)phenyl]methyl]dihydro-2(3H)furanone-[7,7',8,8',9',9'-D6] (benzyl-protected matairesinol-D6) was fully characterized.

A validated HPLC stability-indicating method for the determination of diacerhein in bulk drug substance.

A novel stability-indicating high-performance liquid chromatographic (HPLC) method was developed and validated for the assay of diacerhein in bulk forms. Diacerhein was found to degrade in alkaline and acidic conditions and also under oxidative stress. The drug was stable to dry heat and in presence of light. Resolution of drug, its potential impurities and degradation products were achieved on a RP18 (endcapped) column utilizing 0.1 M phosphoric acid and methanol (40:60, v/v) as eluent at the detection wavelength of 254 nm. The validation studies were carried out fulfilling International Conference on Harmonisation (ICH) requirements. The procedure was found to be specific, linear, precise (including intermediate precision), accurate and robust.

High-performance thin-layer chromatographic-densitometric determination of secoisolariciresinol diglucoside in flaxseed.

A HPTLC-densitometric method, based on an external standard approach, was developed in order to obtain a novel procedure for routine analysis of secoisolariciresinol diglucoside (SDG) in flaxseed with a minimum of sample pre-treatment. Optimization of TLC conditions for the densitometric scanning was reached by eluting HPTLC silica gel plates in a horizontal developing chamber. Quantitation of SDG was performed in single beam reflectance mode by using a computer-controlled densitometric scanner and applying a five-point calibration in the 1.00-10.00 microg/spot range. As no sample preparation was required, the proposed HPTLC-densitometric procedure demonstrated to be reliable, yet using an external standard approach. The proposed method is precise, reproducible and accurate and can be employed profitably in place of HPLC for the determination of SDG in complex matrices.