An ethically guided preclinical device for phenotyping H2 production in laboratory rodents.

BACKGROUND: Dihydrogen (H2) is produced endogenously by the intestinal microbiota through the fermentation of diet carbohydrates. Over the past few years, numerous studies have demonstrated the significant therapeutic potential of H2 in various pathophysiological contexts, making the characterization of its production in laboratory species of major preclinical importance. METHODS: This study proposes an innovative solution to accurately monitor H2 production in free-moving rodents while respecting animal welfare standards. The developed device consisted of a wire rodent cage placed inside an airtight chamber in which the air quality was maintained, and the H2 concentration was continuously analyzed. After the airtightness and efficiency of the systems used to control and maintain air quality in the chamber were checked, tests were carried out on rats and mice with different metabolic phenotypes, over 12 min to 1-h experiments and repeatedly. H2 production rates (HPR) were obtained using an easy calculation algorithm based on a first-order moving average. RESULTS: HPR in hyperphagic Zucker rats was found to be twice as high as in control Wistar rats, respectively, 2.64 and 1.27 nmol.s-1 per animal. In addition, the ingestion of inulin, a dietary fiber, stimulated H2 production in mice. HPRs were 0.46 nmol.s-1 for animals under control diet and 1.99 nmol.s-1 for animals under inulin diet. CONCLUSIONS: The proposed device coupled with our algorithm enables fine analysis of the metabolic phenotype of laboratory rats or mice with regard to their endogenous H2 production.

Hydrogen inhalation: in vivo rat genotoxicity tests.

Preclinical and clinical studies have shown that molecular hydrogen (H2) has anti-oxidant, anti-inflammatory, and anti-apoptotic properties. Safety data are available in the literature and acute toxicity has been tested in isolated cells and laboratory animals. We have evaluates the genotoxicity of H2 in vivo in rats after 72 h exposure, following the International Council for Harmonization guidelines ICH S2 (R1). The study was conducted on three groups of male Wistar rats: a negative control group, a positive control group receiving methyl methanesulfonate, and a H2-treated group receiving a 3.1% H2 gas mixture for 72 h. Alkaline comet, formamidopyrimidine DNA glycosylase (Fpg)-modified comet and bone marrow micronucleus assays were performed. H2 exposure increased neither comet-tail DNA intensity (DNA damage) nor frequency of "hedgehogs" in blood, liver, lungs, or bronchoalveolar lavage fluid. No increase in Fpg-sensitive sites in lungs, no induction of micronucleus formation, and no imbalance of immature erythrocyte to total erythrocyte ratio (IME%) was observed in rats exposed to H2. The ICH S2 (R1) test-battery revealed no in vivo genotoxicity in Wistar rats after 72 h inhalation of a mixture containing 3.1% H2.

Small-Angle Neutron Scattering Reveals the Nanostructure of Liposomes with Embedded OprF Porins of Pseudomonas aeruginosa.

The use of liposomes as drug delivery systems emerged in the last decades in view of their capacity and versatility to deliver a variety of therapeutic agents. By means of small-angle neutron scattering (SANS), we performed a detailed characterization of liposomes containing outer membrane protein F (OprF), the main porin of the Pseudomonas aeruginosa bacterium outer membrane. These OprF-liposomes are the basis of a novel vaccine against this antibiotic-resistant bacterium, which is one of the main hospital-acquired pathogens and causes each year a significant number of deaths. SANS data were analyzed by a specific model we created to quantify the crucial information about the structure of the liposome containing OprF, including the lipid bilayer structure, the amount of protein in the lipid bilayer, the average protein localization, and the effect of the protein incorporation on the lipid bilayer. Quantification of such structural information is important to enhance the design of liposomal delivery systems for therapeutic applications.

Reuse of medical face masks in domestic and community settings without sacrificing safety: Ecological and economical lessons from the Covid-19 pandemic.

The need for personal protective equipment increased exponentially in response to the Covid-19 pandemic. To cope with the mask shortage during springtime 2020, a French consortium was created to find ways to reuse medical and respiratory masks in healthcare departments. The consortium addressed the complex context of the balance between cleaning medical masks in a way that maintains their safety and functionality for reuse, with the environmental advantage to manage medical disposable waste despite the current mask designation as single-use by the regulatory frameworks. We report a Workflow that provides a quantitative basis to determine the safety and efficacy of a medical mask that is decontaminated for reuse. The type IIR polypropylene medical masks can be washed up to 10 times, washed 5 times and autoclaved 5 times, or washed then sterilized with radiations or ethylene oxide, without any degradation of their filtration or breathability properties. There is loss of the anti-projection properties. The Workflow rendered the medical masks to comply to the AFNOR S76-001 standard as "type 1 non-sanitory usage masks". This qualification gives a legal status to the Workflow-treated masks and allows recommendation for the reuse of washed medical masks by the general population, with the significant public health advantage of providing better protection than cloth-tissue masks. Additionally, such a legal status provides a basis to perform a clinical trial to test the masks in real conditions, with full compliance with EN 14683 norm, for collective reuse. The rational reuse of medical mask and their end-of-life management is critical, particularly in pandemic periods when decisive turns can be taken. The reuse of masks in the general population, in industries, or in hospitals (but not for surgery) has significant advantages for the management of waste without degrading the safety of individuals wearing reused masks.

Nanostructural Characterization of Cardiolipin-Containing Tethered Lipid Bilayers Adsorbed on Gold and Silicon Substrates for Protein Incorporation.

A key to the development of lipid membrane-based devices is a fundamental understanding of how the molecular structure of the lipid bilayer membrane is influenced by the type of lipids used to build the membrane. This is particularly important when membrane proteins are included in these devices since the precise lipid environment affects the ability to incorporate membrane proteins and their functionality. Here, we used neutron reflectometry to investigate the structure of tethered bilayer lipid membranes and to characterize the incorporation of the NhaA sodium proton exchanger in the bilayer. The lipid membranes were composed of two lipids, dioleoyl phosphatidylcholine and cardiolipin, and were adsorbed on gold and silicon substrates using two different tethering architectures based on functionalized oligoethylene glycol molecules of different lengths. In all of the investigated samples, the addition of cardiolipin caused distinct structural rearrangement including crowding of ethylene glycol groups of the tethering molecules in the inner head region and a thinning of the lipid tail region. The incorporation of NhaA in the tethered bilayers following two different protocols is quantified, and the way protein incorporation modulates the structural properties of these membranes is detailed.

Controlled Heat and Humidity-Based Treatment for the Reuse of Personal Protective Equipment: A Pragmatic Proof-of-Concept to Address the Mass Shortage of Surgical Masks and N95/FFP2 Respirators and to Prevent the SARS-CoV2 Transmission.

Background: The coronavirus infectious disease-2019 (COVID-19) pandemic has led to an unprecedented shortage of healthcare resources, primarily personal protective equipment like surgical masks, and N95/filtering face piece type 2 (FFP2) respirators. Objective: Reuse of surgical masks and N95/FFP2 respirators may circumvent the supply chain constraints and thus overcome mass shortage. Methods, design, setting, and measurement: Herein, we tested the effects of dry- and moist-air controlled heating treatment on structure and chemical integrity, decontamination yield, and filtration performance of surgical masks and FFP2 respirators. Results: We found that treatment in a climate chamber at 70°C during 1 h with 75% humidity rate was adequate for enabling substantial decontamination of both respiratory viruses, oropharyngeal bacteria, and model animal coronaviuses, while maintaining a satisfying filtering capacity. Limitations: Further studies are now required to confirm the feasibility of the whole process during routine practice. Conclusion: Our findings provide compelling evidence for the recycling of pre-used surgical masks and N95/FFP2 respirators in case of imminent mass shortfall.

The biocompatibility of biofuel cells operating inside the body.

In 1968 Wolfson et al. published the concept for producing energy inside the body using catalytic electrodes exposed to the body fluid as an electrolyte and utilising naturally occurring fuels such as glucose. Since then, the technology has advanced to enhance the levels of power using enzymes immobilised within three-dimensional bioelectrodes that are nanostructured. Current research in the field of enzymatic fuel cells is directed toward applying electrochemical and nanostructural expertise to increase the energy density, to increase the power density, to increase the operational stability, and to increase the voltage output. Nonetheless, biocompatibility remains the major challenge for increasing the life-time for implanted enzymatic biofuel cells. Here, we discuss the current issues for biocompatibility and suggest directions to enhance the design of biofuel cells so as to increase the life-time of implantation whilst maintaining sufficient performance to provide power for implanted medical devices.

Long duration stabilization of porous silicon membranes in physiological media: Application for implantable reactors.

The natural biodegradabilty of porous silicon (pSi) in physiological media limits its wider usage for implantable systems. We report the stabilization of porous silicon (pSi) membranes by chemical surface oxidation using RCA1 and RCA2 protocols, which was followed by a PEGylation process using a silane-PEG. These surface modifications stabilized the pSi to allow a long period of immersion in PBS, while leaving the pSi surface sufficiently hydrophilic for good filtration and diffusion of several biomolecules of different sizes without any blockage of the pSi structure. The pore sizes of the pSi membranes were between 5 and 20 nm, with the membrane thickness around 70 µm. The diffusion coefficient for fluorescein through the membrane was 2 × 10-10 cm2 s-1, and for glucose was 2.2 × 10-9 cm2 s-1. The pSi membrane maintained that level of glucose diffusion for one month of immersion in PBS. After 2 months immersion in PBS the pSi membrane continued to operate, but with a reduced glucose diffusion coefficient. The chemical stabilization of pSi membranes provided almost 1 week stable and functional biomolecule transport in blood plasma and opens the possibility for its short-term implantation as a diffusion membrane in biocompatible systems.

A PANI supported lipid bilayer that contains NhaA transporter proteins provides a basis for a biomimetic biocapacitor.

We designed a supported lipid bilayer (SLB) biomimetic membrane system that comprised polyaniline (PANI) to support a lipid bilayer membrane that incorporated Na+/H+ transporter proteins (NhaA) to give the system the capability of controllable electrogenic ion transport. The high turnover rate of NhaA (∼105 per min) provides the basis for this PANI-SLB-NhaA system to be a high-speed rechargeable biocapacitor that functions as a low-energy-consuming fast switch for biological engineering applications.

A Biomimetic Lipid Membrane Device Reveals the Interaction of Cancer Biomarkers with Human Serum Lipidic Moieties.

A major problem for the detection of cancer biomarkers in plasma or serum is that common clinical practice does not require the patient to be in a fasting state. Considering that lipoproteins are the main population affected by food intake, the authors hypothesized that biomarkers could be embedded in lipid particles and thereby opens a new avenue for detection. Using the recently published biomarker, soluble VE-cadherin (sVE), the authors tested our hypothesis using techniques of biophysics, biochemistry and the tools of nanobiotechnology on serum samples from kidney cancer patients (n = 106). Optical density as well as contact angle measurements of serum revealed heterogeneity in the particle content of the serum samples. Isolation of the lipidic moieties by ultracentrifugation showed that sVE was detected in this compartment. Further, isolation of lipoprotein subclasses by precipitation with sodium phosphotungstate and MgCl2 , showed that HDL carried the majority of sVE. Immunoprecipitation of sVE confirmed that it was associated with Apolipoprotein A1, a major compound of HDL. Using a biomimetic lipid bilayer membrane coupled with impedance spectroscopy the authors quantified, in real-time, that the sVE adsorbed to the lipid bilayer membrane without altering its structure. Taken together, these results show for the first time a direct interaction of a cancer biomarker with lipids. The authors anticipate these results to prompt fasting for future blood tests for large-scale studies in the biomarkers research field.

Tackling the Concept of Symbiotic Implantable Medical Devices with Nanobiotechnologies.

This review takes an approach to implanted medical devices that considers whether the intention of the implanted device is to have any communication of energy or materials with the body. The first part describes some specific examples of three different classes of implants, analyzed with regards to the type of signal sent to cells. Through several examples, the authors describe that a one way signaling to the body leads to encapsulation or degradation. In most cases, those phenomena do not lead to major problems. However, encapsulation or degradation are critical for new kinds of medical devices capable of duplex communication, which are defined in this review as symbiotic devices. The concept the authors propose is that implanted medical devices that need to be symbiotic with the body also need to be designed with an intended duplex communication of energy and materials with the body. This extends the definition of a biocompatible system to one that requires stable exchange of materials between the implanted device and the body. Having this novel concept in mind will guide research in a new field between medical implant and regenerative medicine to create actual symbiotic devices.

Challenges for successful implantation of biofuel cells.

There is a growing interest in the design and engineering of operational biofuel cells that can be implanted. This review highlights the recent progress in the electrochemistry of biofuel cell technologies, but with a particular emphasis on the medical and physiological aspects that impact the biocompatibility of biofuel cells operating inside a living body. We discuss the challenge of supplying power to implantable medical devices, with regard to the limitations of lithium battery technology and why implantable biofuel cells can be a promising alternative to provide the levels of power required for medical devices. In addition to the challenge of designing a biofuel cell that provides a stable level of sufficient power, the review highlights the biocompatibility and biofouling problems of implanting a biofuel cell that have a major impact on the availability of the substrates inside body that provide fuel for the biofuel cell. These physiological challenges and associated ethical considerations are essential to consider for biofuel cells that are designed to be implanted for long-term operation inside a living animal and eventually to human clinical applications.

Functional Characterization of Cell-Free Expressed OprF Porin from Pseudomonas aeruginosa Stably Incorporated in Tethered Lipid Bilayers.

OprF has a central role in Pseudomonas aeruginosa virulence and thus provides a putative target for either vaccines or antibiotic cofactors that could overcome the bacterium's natural resistance to antibiotics. Here we describe a procedure to optimize the production of highly pure and functional OprF porins that are then incorporated into a tethered lipid bilayer. This is a stable biomimetic system that provides the capability to investigate structural aspects and function of OprF using and neutron reflectometry and electrical impedance spectroscopy. The recombinant OprF produced using the optimized cell-free procedure yielded a quantity of between 0.5 to 1.0 mg/mL with a purity ranging from 85 to 91% in the proteoliposomes. The recombinant OprF is capable of binding IFN-γ and is correctly folded in the proteoliposomes. Because OprF proteins form pores the biomimetic system allowed the measurement of OprF conductance using impedance spectroscopy. The neutron reflectometry measurements showed that the OprF protein is incorporated into the lipid bilayer but with parts of the protein in both the regions above and below the lipid bilayer. Those structural aspects are coherent with the current assumed structure of a transmembrane N-terminal domain composed by eight stranded beta-barrels and a globular C-terminal domain located in the periplasm. Currently there are no crystal structures available for OprF. The experimental model system that we describe provides a basis for further fundamental studies of OprF and particularly for the ongoing biotechnological development of OprF as a target for antibacterial drugs.

Nanostructural determination of a lipid bilayer tethered to a gold substrate.

Tethered lipid bilayer membranes (tBLM) are planar membranes composed of free lipids and molecules tethered to a solid planar substrate providing a useful model of biological membranes for a wide range of biophysical studies and biotechnological applications. The properties of the tBLM depend on the free lipids and on the chemistry of the tethering molecules. We present a nanoscale characterization of a tBLM composed of deuterated 1,2-dimyristoyl-sn-glycero-3-phosphocholine (d-DMPC) free lipids, benzyl disulfide undecaethylene glycol phytanol (DLP) tethering molecules, and benzyl disulfiide tetraethylene glycol polar spacer molecules (PSM) used to control the areal density of tethering molecules through coadsorption. The use of selected isotopic substitution provides a way to distinguish the conformation and location of the tethered lipids from the free lipids and to elucidate how the two components influence the structure of the tBLM. These findings provide useful information to optimise the insertion of transmembrane proteins into the tethered bilayer system.

[Shades of grays for implanting an enzymatic biofuel cell]. / La biopile enzymatique à glucose/oxygène - Quelques nuances de Grays .

An implanted biofuel cell (IBFC) is a novel device that provides the means to create electricity from glucose and oxygen, using an original architecture for the IBFC that provides efficient work inside a living organism. In the future these IBFCs will be required to power implanted devices to assist failing physiological functions in humans. The active ingredients of such IBFCs are glucose oxidase at the anode and laccase at the cathode. These enzymes are entrapped in a 3D network of conductive and insulated materials. This publication solves the issue of the sterilization of such a complex device, using gamma irradiation. A 12kGy dose was sufficient to show absence of implant infection in all the implantations performed. We also prove in vitro functioning of both bioelectrodes with a high dose of 42kGy.

Cell-free production of VDAC directly into liposomes for integration with biomimetic membrane systems.

The mitochondrial voltage-dependent anion channel (VDAC) is a pivotal protein since it provides the major transport pathway between the cytosol and the mitochondrial intermembrane space and it is implicated in cell apoptosis by functioning as a gatekeeper for the trafficking of mitochondrial death molecules. VDAC is a beta-barrel channel with a large conductance, and we use it as a model transport protein for the design of biomimetic systems. To overcome the limitations of classical overexpression methods for producing and purifying membrane proteins (MPs) we describe here the use of an optimized cell-free system. In a one-step reaction VDAC is obtained directly integrated into liposomes and purified by ultracentrifugation. We then combine proteoliposomes with different bilayers models in order to validate VDAC insertion and functionality. This VDAC biomimetic model is the first example validating the use of a cell-free expression system for production of MPs into liposomes and tethered bilayers as a toolbox to build a wide range of biomimetic devices.

Facile bench-top fabrication of enclosed circular microchannels provides 3D confined structure for growth of prostate epithelial cells.

We present a simple bench-top method to fabricate enclosed circular channels for biological experiments. Fabricating the channels takes less than 2 hours by using glass capillaries of various diameters (from 100 µm up to 400 µm) as a mould in PDMS. The inner surface of microchannels prepared in this way was coated with a thin membrane of either Matrigel or a layer-by-layer polyelectrolyte to control cellular adhesion. The microchannels were then used as scaffolds for 3D-confined epithelial cell culture. To show that our device can be used with several epithelial cell types from exocrine glandular tissues, we performed our biological studies on adherent epithelial prostate cells (non-malignant RWPE-1 and invasive PC3) and also on breast (non-malignant MCF10A) cells We observed that in static conditions cells adhere and proliferate to form a confluent layer in channels of 150 µm in diameter and larger, whereas cellular viability decreases with decreasing diameter of the channel. Matrigel and PSS (poly (sodium 4-styrenesulphonate)) promote cell adhesion, whereas the cell proliferation rate was reduced on the PAH (poly (allylamine hydrochloride))-terminated surface. Moreover infusing channels with a continuous flow did not induce any cellular detachment. Our system is designed to simply grow cells in a microchannel structure and could be easily fabricated in any biological laboratory. It offers opportunities to grow epithelial cells that support the formation of a light. This system could be eventually used, for example, to collect cellular secretions, or study cell responses to graduated hypoxia conditions, to chemicals (drugs, siRNA, …) and/or physiological shear stress.

The modulation of attachment, growth and morphology of cancerous prostate cells by polyelectrolyte nanofilms.

The behaviour of cancerous epithelial prostatic cells (PC3) growing on polyelectrolytes (PE) coatings was compared to the behaviour of immortalized normal prostatic cells (PNT-2). The cell behaviour was evaluated and quantified in terms of initial cell attachment, growth, metabolic activity, morphometry, adhesion, apoptosis and stress related gene expression. Both the anionic PSS (poly(sodium 4-styrenesulphonate))-terminated surface and cationic PAH (poly(allylamine hydrochloride))-terminated surfaces were not cytotoxic. The initial attachment of cells was better on the PAH-terminated surface compared to fibronectin. However, the proliferation rate of PC3 cells was reduced on the PAH-terminated surface and slightly increased on the PSS coatings. Only PAH prevented the clustering phenotype of PC3 and reduced the number of focal adhesion points as compared to fibronectin or PSS coatings. In contrast, none of the PE surfaces significantly affected the biological responses of PNT-2 cells. PAH-terminating films provide a tool to preferentially modulate the growth of some cancerous phenotypes, in this case as a micro-environment that reduces the growth of metastatic PC3 cells.

Identification of three tomato flower and fruit MADS-box proteins with a putative histone deacetylase binding domain.

MADS-box transcription factors play crucial roles in organ and cell differentiation in organisms ranging from yeast to humans. Most of the work on plant MADS-box proteins focused on their roles in floral development whereas less information is available on their function in fruit maturation. We cloned three distinct tomato cDNAs using a RT-PCR approach, encoding LeMADS1, LeMADS5 and LeMADS6 factors and whose mRNAs mostly accumulate in tomato flowers and fruits. Phylogeny analysis indicates that LeMADS1, 5 and 6 belong to the MEF2-like family. When transiently expressed in tobacco leaves or in human cells, LeMADS1, 5 and 6 are targeted to the cell nucleus. As the endogenous target genes of these putative transcription factors are unknown, the transcriptional activity of these proteins was characterized in a heterologous system and we showed that, when fused to a Gal4-DNA-binding domain, they repress the transcription of heterologous reporter genes. Since histone deacetylases control MEF2 transcriptional activity and since a putative histone deacetylase binding site was present in LeMADS1, 5 and 6, we tested the potential interaction between these factors and HDAC5 deacetylase. Surprisingly, in this heterologous system, LeMADS1, 5 and 6 interacted with HDAC5 N-terminal region. Our data suggest that, like mammalian MEF2A, plant MADS-box transcriptional activity might be regulated by enzymes controlling chromatin acetylation.

A glucose biofuel cell implanted in rats.

Powering future generations of implanted medical devices will require cumbersome transcutaneous energy transfer or harvesting energy from the human body. No functional solution that harvests power from the body is currently available, despite attempts to use the Seebeck thermoelectric effect, vibrations or body movements. Glucose fuel cells appear more promising, since they produce electrical energy from glucose and dioxygen, two substrates present in physiological fluids. The most powerful ones, Glucose BioFuel Cells (GBFCs), are based on enzymes electrically wired by redox mediators. However, GBFCs cannot be implanted in animals, mainly because the enzymes they rely on either require low pH or are inhibited by chloride or urate anions, present in the Extra Cellular Fluid (ECF). Here we present the first functional implantable GBFC, working in the retroperitoneal space of freely moving rats. The breakthrough relies on the design of a new family of GBFCs, characterized by an innovative and simple mechanical confinement of various enzymes and redox mediators: enzymes are no longer covalently bound to the surface of the electron collectors, which enables use of a wide variety of enzymes and redox mediators, augments the quantity of active enzymes, and simplifies GBFC construction. Our most efficient GBFC was based on composite graphite discs containing glucose oxidase and ubiquinone at the anode, polyphenol oxidase (PPO) and quinone at the cathode. PPO reduces dioxygen into water, at pH 7 and in the presence of chloride ions and urates at physiological concentrations. This GBFC, with electrodes of 0.133 mL, produced a peak specific power of 24.4 microW mL(-1), which is better than pacemakers' requirements and paves the way for the development of a new generation of implantable artificial organs, covering a wide range of medical applications.