Indirect bandgap MoSe2 resonators for light-emitting nanophotonics.

Transition metal dichalcogenides (TMDs) are promising for new generation nanophotonics due to their unique optical properties. However, in contrast to direct bandgap TMD monolayers, bulk samples have an indirect bandgap that restricts their application as light emitters. On the other hand, the high refractive index of these materials allows for effective light trapping and the creation of high-Q resonators. In this work, a method for the nanofabrication of microcavities from indirect TMD multilayer flakes, which makes it possible to achieve pronounced resonant photoluminescence enhancement due to the cavity modes, is proposed. Whispering gallery mode (WGM) resonators are fabricated from bulk indirect MoSe2 using resistless scanning probe lithography. A micro-photoluminescence (µ-PL) investigation revealed the WGM spectra of the resonators with an enhancement factor up to 100. The characteristic features of WGMs are clearly seen from the scattering experiments which are in agreement with the results of numerical simulations. It is shown that the PL spectra in the fabricated microcavities are contributed by two mechanisms demonstrating different temperature dependences. The indirect PL, which is quenched with the temperature decrease, and the direct PL which almost does not depend on the temperature. The results of the work show that the suggested approach has great prospects in nanophotonics.

Nanoscale Electric Field Probing in a Single Nanowire with Raman Spectroscopy and Elastic Strain.

In this work we investigate the Raman response of extremely strained gallium phosphide nanowires. We analyze new strain-induced spectral phenomena such as 2-fold and 3-fold phonon peak splitting which arise due to nontrivial internal electric field distribution coupled with inhomogeneous strain. We show that high bending strain acts as a probe allowing us to define the electric field distribution with deep subwavelength resolution using the corresponding changes of the Raman spectra. We investigate the nature of the localization with respect to nanowire diameter, excitation spot position, and light polarization, supporting the experiment with 3D numerical modeling. Based on our findings we propose a research tool allowing to precisely localize the electric field in a certain subwavelength region of the nanophotonic resonator.

Photon Drag Currents and Terahertz Generation in α-Sn/Ge Quantum Wells.

We have fabricated α-Sn/Ge quantum well heterostructures by sandwiching nano-films of α-Sn between Ge nanolayers. The samples were grown via e-beam deposition and characterized by Raman spectroscopy, atomic force microscopy, temperature dependence of electrical resistivity and THz time-resolved spectroscopy. We have established the presence of α-Sn phase in the polycrystalline layers together with a high electron mobility µ = 2500 ± 100 cm2 V-1 s-1. Here, the temperature behavior of the resistivity in a magnetic field is distinct from the semiconducting films and three-dimensional Dirac semimetals, which is consistent with the presence of linear two-dimensional electronic dispersion arising from the mutually inverted band structure at the α-Sn/Ge interface. As a result, the α-Sn/Ge interfaces of the quantum wells have topologically non-trivial electronic states. From THz time-resolved spectroscopy, we have discovered unusual photocurrent and THz radiation generation. The mechanisms for this process are significantly different from ambipolar diffusion currents that are responsible for THz generation in semiconducting thin films, e.g., Ge. Moreover, the THz generation in α-Sn/Ge quantum wells is almost an order of magnitude greater than that found in Ge. The substantial strength of the THz radiation emission and its polarization dependence may be explained by the photon drag current. The large amplitude of this current is a clear signature of the formation of conducting channels with high electron mobility, which are topologically protected.

Effect of crystal structure on the Young's modulus of GaP nanowires.

Young's modulus of tapered mixed composition (zinc-blende with a high density of twins and wurtzite with a high density of stacking faults) gallium phosphide (GaP) nanowires (NWs) was investigated by atomic force microscopy. Experimental measurements were performed by obtaining bending profiles of as-grown inclined GaP NWs deformed by applying a constant force to a series of NW surface locations at various distances from the NW/substrate interface. Numerical modeling of experimental data on bending profiles was done by applying Euler-Bernoulli beam theory. Measurements of the nano-local stiffness at different distances from the NW/substrate interface revealed NWs with a non-ideal mechanical fixation at the NW/substrate interface. Analysis of the NWs with ideally fixed base resulted in experimentally measured Young's modulus of 155 ± 20 GPa for ZB NWs, and 157 ± 20 GPa for WZ NWs, respectively, which are in consistence with a theoretically predicted bulk value of 167 GPa. Thus, impacts of the crystal structure (WZ/ZB) and crystal defects on Young's modulus of GaP NWs were found to be negligible.

Study of local anodic oxidation regimes in MoSe2.

Scanning probe microscopy is widely known not only as a well-established research method but also as a set of techniques enabling precise surface modification. One such technique is local anodic oxidation (LAO). In this study, we investigate the LAO of MoSe2 transferred on an Au/Si substrate, focusing specifically on the dependence of the height and diameter of oxidized dots on the applied voltage and time of exposure at various humidities. Depending on the humidity, two different oxidation regimes were identified. The first, at a relative humidity (RH) of 60%-65%, leads to in-plane isotropic oxidation. For this regime, we analyze the dependence of the size of oxidized dots on the oxidation parameters and modify the classical equation of oxidation kinetics to account for the properties of MoSe2 and its oxide. In this regime, patterns with a maximum spatial resolution of 10 nm were formed on the MoSe2 surface. The second is the in-plane anisotropic oxidation regime that arises at a RH of 40%-50%. In this regime, oxidation leads to the formation of triangles oxidized inside the zigzag edges. Based on the mutual orientation of zigzag and armchair directions in successive oxidized layers, the stacking type and phase of MoSe2 flakes were determined. These results allow LAO to be considered not only as an ultra-high-resolution nanolithography method, but also as a method for investigating the crystal structure of materials with strong intrinsic anisotropy, such as transition metal dichalcogenides.

Effect of the Uniaxial Compression on the GaAs Nanowire Solar Cell.

Research regarding ways to increase solar cell efficiency is in high demand. Mechanical deformation of a nanowire (NW) solar cell can improve its efficiency. Here, the effect of uniaxial compression on GaAs nanowire solar cells was studied via conductive atomic force microscopy (C-AFM) supported by numerical simulation. C-AFM I-V curves were measured for wurtzite p-GaAs NW grown on p-Si substrate. Numerical simulations were performed considering piezoresistance and piezoelectric effects. Solar cell efficiency reduction of 50% under a -0.5% strain was observed. The analysis demonstrated the presence of an additional fixed electrical charge at the NW/substrate interface, which was induced due to mismatch between the crystal lattices, thereby affecting the efficiency. Additionally, numerical simulations regarding the p-n GaAs NW solar cell under uniaxial compression were performed, showing that solar efficiency could be controlled by mechanical deformation and configuration of the wurtzite and zinc blende p-n segments in the NW. The relative solar efficiency was shown to be increased by 6.3% under -0.75% uniaxial compression. These findings demonstrate a way to increase efficiency of GaAs NW-based solar cells via uniaxial mechanical compression.

Control of Conductivity of InxGa1-xAs Nanowires by Applied Tension and Surface States.

The electronic properties of semiconductor AIIIBV nanowires (NWs) due to their high surface/volume ratio can be effectively controlled by NW strain and surface electronic states. We study the effect of applied tension on the conductivity of wurtzite InxGa1-xAs (x ∼ 0.8) NWs. Experimentally, conductive atomic force microscopy is used to measure the I-V curves of vertically standing NWs covered by native oxide. To apply tension, the microscope probe touching the NW side is shifted laterally to produce a tensile strain in the NW. The NW strain significantly increases the forward current in the measured I-V curves. When the strain reaches 4%, the I-V curve becomes almost linear, and the forward current increases by 3 orders of magnitude. In the latter case, the tensile strain is supposed to shift the conduction band minima below the Fermi level, whose position, in turn, is fixed by surface states. Consequently, the surface conductivity channel appears. The observed effects confirm that the excess surface arsenic is responsible for the Fermi level pinning at oxidized surfaces of III-As NWs.

Half-disk laser: insight into the internal mode structure of laser resonators.

Usually electromagnetic modes inside a laser resonator are a matter of the theoretical studies. In a sense we manage "to have a look into a whispering gallery mode (WGM) resonator" and observe how the resonator modes arrange in reality. The picture occurs to be quite different from the commonly used Bessel modes in a disk resonator. A chance to explore optical modes inside a resonator appears in a WGM laser with a cleaved cavity. The flat laser facet gives an opportunity to study both far and near field patterns formed by different modes. In this research we use a high resolution technique of detection of laser emission based on an atomic force microscope, which allowed us to visualize even high Q modes normally sealed inside the resonator. This information was completed with spatially resolved emission spectra and far-field patterns measured using an infrared camera. The analysis of the obtained results using both wave and geometrical optics approaches and finite elements simulations showed that emission of the studied devices is governed by a few low order optical modes experiencing a small number of reflections from the resonator walls. These modes can be considered as counter propagating Gaussian beams and their interference at the laser facet was also observed in the experiment. This work showed that, contrary to conventional ridge or surface emitting lasers, in such deformed disk resonators outputs of different optical modes are spatially separated and can be studied individually along the cleaved facet of the laser.

Unified mechanism of the surface Fermi level pinning in III-As nanowires.

Fermi level pinning at the oxidized (110) surfaces of III-As nanowires (GaAs, InAs, InGaAs, AlGaAs) is studied. Using scanning gradient Kelvin probe microscopy, we show that the Fermi level at oxidized cleavage surfaces of ternary Al x Ga1-x As (0 ≤ x ≤ 0.45) and Ga x In1-x As (0 ≤ x ≤ 1) alloys is pinned at the same position of 4.8 ± 0.1 eV with regard to the vacuum level. The finding implies a unified mechanism of the Fermi level pinning for such surfaces. Further investigation, performed by Raman scattering and photoluminescence spectroscopy, shows that photooxidation of the Al x Ga1-x As and Ga x In1-x As nanowires leads to the accumulation of an excess of arsenic on their crystal surfaces which is accompanied by a strong decrease of the band-edge photoluminescence intensity. We conclude that the surface excess arsenic in crystalline or amorphous forms is responsible for the Fermi level pinning at oxidized (110) surfaces of III-As nanowires.

Nitride surface passivation of GaAs nanowires: impact on surface state density.

Surface nitridation by hydrazine-sulfide solution, which is known to produce surface passivation of GaAs crystals, was applied to GaAs nanowires (NWs). We studied the effect of nitridation on conductivity and microphotoluminescence (µ-PL) of individual GaAs NWs using conductive atomic force microscopy (CAFM) and confocal luminescent microscopy (CLM), respectively. Nitridation is found to produce an essential increase in the NW conductivity and the µ-PL intensity as well evidence of surface passivation. Estimations show that the nitride passivation reduces the surface state density by a factor of 6, which is of the same order as that found for GaAs/AlGaAs nanowires. The effects of the nitride passivation are also stable under atmospheric ambient conditions for six months.