Biomechanical Comparison of Impaction Techniques and Cross-Sectional Femoral Stem Shapes for Cementless Total Hip Arthroplasty.

Introduction: Traditional mallet broaching and stem seating in cementless total hip arthroplasty (THA) can result in femoral stem misalignment, potentially reducing implant longevity. This study aimed to compare the pullout strength of cementless THA femoral stems with different cross-sectional designs achieved through the powered impactor method versus the traditional mallet method. Methods: The authors utilized 24 polyurethane foam femurs and two femoral bone preservation stems with different proximal cross-sectional shapes (double taper: ACTIS®, size 5; flat taper: TRI-LOCK®, size 5). A single orthopedic surgeon broached each femur from size 0 to size 5 using either the powered impactor or mallet impaction methods. Broaching time and component implantation times were recorded. A load-to-failure pullout strength test was conducted, and the ultimate pullout load was recorded. Results: The broaching time for the TRI-LOCK® stem showed a statistically significant difference between the two impaction methods (powered: 37±7 seconds, mallet: 75±29 seconds, F[3, 20] = 4.56, p = 0.002), but no statistically significant difference was detected for the ACTIS® stem between the two impaction methods (powered: 47±22 seconds, mallet: 59±9 seconds, F[3, 20] = 4.56, p = 0.304). There was a statistically significant difference in pullout strength between the two impaction groups, and this strength was influenced by the implant cross-sectional shape (ACTIS®: 774±75N versus 679±22N, F(3,20) = 16.38, p = 0.018; TRI-LOCK®: 616±57N versus 859±85N, F(3, 20) = 16.38, p <0.001). Conclusions: The technique used for femoral bone preparation (powered impactor versus mallet) and the cross-sectional design of the cementless femoral stem are crucial factors that affect initial stem stability and operation time.

The Effect of Bone Quality on Treatment of Intertrochanteric Fractures with Helical Blade Versus Lag Screw Fixation in Cephalomedulary Nails.

Introduction: The specific aim of this retrospective study was to determine whether bone quality has any effect on the complication rates or overall survivorship between helical blades and lag screws in cephalomedullary nails used for intertrochanteric hip fractures. Methods: The authors reviewed clinical charts and radiographic studies of patients between January 2012 and August 2019. We reviewed radiographic images (pre-, intra-, and post-operative) to evaluate fracture fixation type, fracture reduction grade, and post-operative complications. We collected dual energy x-ray absorptiometry scan results (T-score) and serum alkaline phosphatase (ALP) isoenzyme activity values to evaluate patient bone quality. Results: We included 303 cases (helical: 197, screw: 106) in the study. Complications were found in 31 (16%) helical blade cases and 23 (22%) lag screw cases. No statistically significant difference was detected when comparing complication rates with patient bone quality between the two groups. These two groups had similar one-year implant survivorship with respect to T-score, the low ALP level group, and normal ALP level group. The helical blade had higher implant survivorship compared to lag screw in five-year survival rate with respect to osteoporotic group, high ALP level group, and normal ALP level group (osteoporotic: 77% vs 69%, high ALP: 73% vs 67%, normal ALP: 70% vs 64%). Conclusions: Similar complication rates were observed between helical blade and lag screw constructs in cephalomedullary femoral nails when accounting for patient bone quality. However, the helical blade design had a higher five-year survival rate.

A Biomechanical Evaluation of Casting Technique and Cast Core Size Effect.

BACKGROUNDS: The goals of this study were to (1) compare the effect of casting technique on biomechanical function with different casting materials and different cast core diameters, and (2) compare the strength of a cast based on the number of layers in relation to the core diameter. METHODS: Two standardized cylindrical cast model sizes were used to simulate forearm and short leg casts (core diameter: 60 mm, 100 mm) with 2 different casting techniques (non-smoothing vs. smoothing with lamination), utilizing 2 casting materials [fiberglass and Plaster of Paris (POP)]. Each cast was created using 3 different layers (Fiberglass: 2 to 4 layers; POP: 3 to 5 layers). Ultimate load-to-failure and flexural rigidity were analyzed through cyclic 4-point bend testing. RESULTS: The biomechanical comparison between forearm and short leg casts were significantly different regardless of the same number of layers for both casting materials and between 2 casting techniques. Increased cast thickness significantly increased the ultimate load-to-failure and bending strength. An increased core diameter size significantly decreased the cast's ultimate load-to-failure (fiberglass: 50% to 108%; POP: 10% to 93%) and bending strength (fiberglass: 17% to 35%; POP: 37% to 49%). Casting technique with smoothing with lamination technique had a negative biomechanical effect on POP and a minimal effect on fiberglass. CONCLUSION: The number of layers to apply for a cast should be based on the size of the extremity. Smoothing and lamination technique did not significantly improve the cast mechanical behavior. CLINICAL RELEVANCE: The findings of this study provide valuable evidence, analysis, and supplementary knowledge that helps guide physicians in proper casting technique.

Degassing of early-formed planetesimals restricted water delivery to Earth.

The timing of delivery and the types of body that contributed volatiles to the terrestrial planets remain highly debated1,2. For example, it is unknown if differentiated bodies, such as that responsible for the Moon-forming giant impact, could have delivered substantial volatiles3,4 or if smaller, undifferentiated objects were more probable vehicles of water delivery5-7. Here we show that the water contents of minerals in achondrite meteorites (mantles or crusts of differentiated planetesimals) from both the inner and outer portions of the early Solar System are ≤2 µg g-1 H2O. These are among the lowest values ever reported for extraterrestrial minerals. Our results demonstrate that differentiated planetesimals efficiently degassed before or during melting. This finding implies that substantial amounts of water could only have been delivered to Earth by means of unmelted material.

Symptomatic Hammertoes Treatment Comparison: Peg-in-Hole Arthrodesis Versus End-to-End Screw Fixation.

Proximal interphalangeal (PIP) arthrodesis technique utilizing the peg-in-hole arthrodesis was founded to avoid the use of retained internal fixation implants and thereby potentially decrease the concern of hardware complication. The specific aim of this study was to report the complication rates of the modified peg-in-hole arthrodesis technique and the end-to-end arthrodesis with single screw fixation technique for correcting symptomatic hammertoe deformities in lesser digits. This retrospective chart review included patients who underwent surgical hammertoe correction of lesser digits between the dates of January 2012 and December 2019. Patient demographic data and charts were reviewed to evaluate need for revision including screw/pin removal and complications related to corrective surgery. Five hundred ninety-three symptomatic hammertoe deformity cases (443 female, 150 male) were identified, with 113 cases (88 female, 25 male) treated with peg-in-hole arthrodesis technique and 480 cases (355 female, 125 male) treated with end-to-end arthrodesis with a single screw technique. The deformity recurrence rate was not significantly different between the two techniques (peg-in-hole: 10%, end-to-end: 13%, p = .428). There were 97 cases with postoperative complications that required re-operation (peg-in-hole: 7 cases, end-to-end: 90 cases) with the majority detected at <6 months. There was no statistically significant difference in reoperation rate between the peg-in-hole technique and the end-to-end arthrodesis technique reoperated with reasons excluding simple screw removal (p = .068). This study tended to show these two arthrodesis techniques have equivalent risks and similar success in bone healing; however, the peg-in-hole arthrodesis technique offers an advantage that does not result in retained hardware.

Can a Blade-Stopping Mechanism on Circular Table Saws Reduce the Severity of Hand Injuries in Contact Scenarios? A Cadaveric Study.

PURPOSE: Table saws are commonly used woodworking tools that carry a substantial risk of injury. Blade-stopping technology has been developed and has the potential to reduce the frequency and severity of injury. This study aimed to evaluate this technology on human tissue and characterize the resulting injuries. METHODS: Twenty-seven fresh, frozen cadaveric specimen hands were used. Three scenarios were tested, with the specimen (1) moving forward ("forward"); (2) moving backward, such as in a kickback scenario ("reverse"); and (3) dropped from above the saw blade ("top"). Each scenario was tested at both slow (0.001 m/sec) and fast (forward: 0.6 m/sec; reverse: 0.5 m/sec; top: 2.4 m/sec) approach speeds. The severity of the injuries was characterized by anatomic evaluation and confirmed with radiographic evaluation. Injuries were classified as no laceration, superficial soft tissue injury, deep soft tissue injury, and bony injury. RESULTS: For the slow approach speed, the brake cartridge engaged in 100% of the trials for all 3 scenarios, and 100% of the specimens sustained no injuries. Forward testing at a fast approach speed revealed the brake cartridge engaged in 89% of the trials (injuries: 4 superficial, 2 deep, 3 bony). Reverse testing at a fast approach speed revealed the brake cartridge engaged in 11% of trials (injuries: 1 superficial, 8 bony). Top testing at a fast approach speed revealed the brake cartridge engaged in 89% of the trials (injuries: 9 bony). CONCLUSIONS: Modern blade-stopping technology did not prevent all traumatic hand injuries in fast approach speed scenarios, but it reduced the incidence and severity of injuries. The technology was more effective at low approach speed scenarios. CLINICAL RELEVANCE: The findings of this study provide information to help understand the factors that can prevent or reduce the severity of contact injuries (hand, finger, or thumb) for operators of table saws.

Biomechanical Comparison of Knotless Suture Anchor Versus Percutaneous End-to-End Technique for Mid-Substance Achilles Tendon Rupture Repair.

Percutaneous Achilles tendon repairs can be performed with 2 distal fixation techniques: knotless suture anchor repair (KL) or percutaneous end-to-end repair (ETE). There is a paucity of literature comparing the biomechanical strength of these 2 distal fixation techniques. The aim of this study was to compare the strength of KL and ETE repairs using flat-braided suture for mid-substance Achilles tendon rupture during simulated progressive rehabilitation. Nine matched pairs of fresh-frozen below-knee cadaveric extremities were randomly assigned into these 2 repair groups. Each specimen was tested in 2 parts sequentially; Part I simulating passive ankle range of motion (cyclic: 20N-100N), and Part II simulating ambulation in a walking boot (cyclic: 20N-190N). The number of cycles, gap displacement, and the mode of failure were recorded for each repair. Achilles tendon repairs using the percutaneous methods of ETE and KL techniques showed no significant difference in the number of cycles to clinical failure, mean gap displacement, or overall failure rate. During Part I, the survival rate in terms of clinical failure for KL and ETE groups was 8 of 9 repairs and 7 of 9 repairs, respectively. During Part II, all repairs experienced clinical failure in both groups. Five repairs in the KL group experienced suture anchor pull out from the calcaneus, and 3 repairs failed at suture-tendon interface. Four repairs in the ETE group failed due to knot slippage and 5 repairs failed at suture-tendon interface. Both techniques are viable options in treating acute mid-substance Achilles tendon ruptures.

Use of electrocautery devices for suture passage through the greater tuberosity: a biomechanical study.

BACKGROUND: The use of electrocautery to facilitate passage of a suture needle through bone without the aid of a drill or burr is a novel technique that has potential utility in orthopedic procedures, but there is a scarcity of research to support its utility. The specific aims of this cadaveric biomechanical study were to evaluate (1) the axial force reduction during suture passage using electrocautery when applied to rotator cuff repair, (2) the temperature change caused while using electrocautery, and (3) the failure loads and failure modes of this technique. METHODS: Five matched pairs of fresh frozen humeri were used, classified into 2 groups: with electrocautery on needle (study group) and without electrocautery on needle (control group). Four individual osseous tunnels were made on the greater tuberosity around the insertion of the supraspinatus tendon. Each specimen was sequentially tested in 2 parts: a needle penetration test (part I) to measure the peak axial force and temperature change and a single load-to-failure test (part II) to measure the maximum load to failure as well as the mechanism of failure. A No. 2 FiberWire suture with a straight needle was used. RESULTS: In part I, the mean peak axial force was lower in the study group compared with the control group for all osseous tunnels but was not statistically significant for individual tunnels. However, there was a significant decrease in peak axial force in the study group of 36% compared with the control group overall (P = .033). There was no significant change in temperature of the tunnel site with the use of electrocautery (mean: 0.2 ± 0.3°C, P = .435). In part II, 100% of the samples from each study group experienced bone tunnel failure. Forty percent of the trials in the study group found lower ultimate failure loads compared with the control group (reduction range: 7%-38%). There was no statistically significant difference in the ultimate failure load between either the loop tested or between the 2 study groups (loop 1: P = .352; loop 2: P = .270). CONCLUSION: Suture passage using electrocautery does significantly decrease the peak force needed to pass a needle directly through the greater tuberosity. This technique does not appear to burn the bone or weaken the bone tunnels. This technique may be useful during open rotator cuff repair or shoulder arthroplasty, although clinicians should be cautious when using this technique as its utility depends on bone quality and cortical thickness, and in vivo results may differ.

Complication rate of overlapping versus nonoverlapping functional and stereotactic surgery: a retrospective cohort study.

OBJECTIVE: Overlapping surgery, in which one attending surgeon manages two overlapping operating rooms (ORs) and is present for all the critical portions of each procedure, is an important policy that improves healthcare access for patients and case volumes for surgeons and surgical trainees. Despite several studies demonstrating the safety and efficacy of overlapping neurosurgical operations, the practice of overlapping surgery remains controversial. To date, there are no studies that have investigated long-term complication rates of overlapping functional and stereotactic neurosurgical procedures. The primary objective of this study was to investigate the 1-year complication rates and OR times for nonoverlapping versus overlapping functional procedures. The secondary objective was to gain insight into what types of complications are the most prevalent and test for differences between groups. METHODS: Seven hundred eighty-three functional neurosurgical cases were divided into two cohorts, nonoverlapping (n = 342) and overlapping (n = 441). The American Society of Anesthesiologists (ASA) scale score was used to compare the preoperative risk for both cohorts. A complication was defined as any surgically related reason that required readmission, reoperation, or an unplanned emergency department or clinic visit that required intervention. Complications were subdivided into infectious and noninfectious. Chi-square tests, independent-samples t-tests, and uni- and multivariable logistic regressions were used to determine significance. RESULTS: There were no significant differences in mean ASA scale score (2.7 ± 0.6 for both groups, p = 0.997) or overall complication rates (8.8% nonoverlapping vs 9.8% overlapping, p = 0.641) between the two cohorts. Infections accounted for the highest percentage of complications in both cohorts (46.6% vs 41.8%, p = 0.686). There were no statistically significant differences between mean in-room OR time (187.5 ± 141.7 minutes vs 197.1 ± 153.0 minutes, p = 0.373) or mean open-to-close time (112.2 ± 107.9 minutes vs 121.0 ± 123.1 minutes, p = 0.300) between nonoverlapping and overlapping cases. CONCLUSIONS: There was no increased risk of 1-year complications or increased OR time for overlapping functional and stereotactic neurosurgical procedures compared with nonoverlapping procedures.

Computed Tomography Derived Patient-specific Instrumentation Total Ankle Arthroplasty Survivorship Outcomes.

Computed tomography (CT) derived patient-specific total ankle arthroplasty (TAA) systems have been utilized for improved accuracy and reproducible implant alignment. The purpose of the present study was to report the overall implant survivorship as well as radiographic analysis of patients who underwent primary TAA utilizing CT-derived patient-specific instrumentation. A retrospective review of medical charts and radiographs were performed on patients who had undergone primary TAA at a single institution in the Midwest region from March 2013 to October 2020. Radiographic analysis included preoperative, initial postoperative, and final follow-up coronal and sagittal tibiotalar alignment as well as periprosthetic radiolucency. A total of 96 patients with a mean follow-up of 3 years (range, 0.3-7.3 years) were included. Implant survivorship was found to be 92% at median follow-up of 3 years. A total of 8 cases (8.3%) required revision/reoperation, with 6 (6.3%) of these reoperations directly related for failure of one of the metallic implant components. There was significant improvement in both coronal and sagittal tibiotalar alignment from preoperative to initial postoperative follow-up (p < .001). At latest postoperative follow-up, there were 88% of TAAs that remained in a neutral alignment following surgery. A total of 10 cases were found to have radiolucency at latest follow-up. In conclusion, the use of CT derived patient-specific TAA showed high implant survivorship with significant improvement of sagittal and coronal tibiotalar alignment. With better implant alignment and position, it potentially reduces the risk of early implant failure or implant loosening in long-term follow-up.

Use of Electrocautery to Facilitate Suture Passage Through the Greater Trochanter of the Femur: A Biomechanical Study.

Introduction: The specific aims of this study were to evaluate (1) the axial force reduction of suture passage utilizing electrocautery when applied to the greater trochanter of the femur, (2) the temperature change caused while using electrocautery for suture passage, and (3) the failure loads and failure modes utilizing this technique. Methods: Five matched pairs of fresh-frozen femurs were used and classified into two groups: with electrocautery on needle (study group) and without electrocautery on needle (control group). Two bicortical, osseous tunnels were made around the insertion of the gluteus medius tendon. Each specimen was sequentially tested in a needle penetration test and a single load-to-failure test. A #5 Ethibond suture with a straight needle was used. Results: Electrocautery reduced the peak axial force for bone penetration in 40% (near cortex) and 70% (far cortex) of the trials, and no significant difference was detected between groups or between two osseous tunnels. The average peak force was significantly higher for the far cortex for both groups and for both osseous tunnels compared to the near cortex. There was no significant change in temperature of the tunnel site with electrocautery. Ninety percent of the samples experienced bone tunnel failure for the study group compared to 70% in the control group. The average ultimate failure load for the study group was lower compared with the control group, but this finding was not statistically significant (range: 6%-15%). Conclusions: Suture passage using electrocautery may not significantly decrease the peak force needed to pass a needle directly through the greater trochanter.

Clinical Outcome of Different Postoperative Prophylactic Strategies on Symptomatic Venous Thromboembolism after Total Knee Arthroplasty.

Introduction: The objective of this study was to evaluate the use of different post-operative prophylactic strategies on the rates of symptomatic venous thromboembolic events (VTE) incidence after primary total knee arthroplasty (TKA). Methods: A retrospective study of patients who underwent primary TKA procedure was performed from January 2015 through July 2020. Outcomes examined prophylaxis medication used during inpatient and outpatient care, amount of medication, length of medication, complications occurring within 90 days post-operatively, including symptomatic VTE (deep venous thrombosis (DVT), and pulmonary embolism (PE)), gastrointestinal (GI) bleeding requiring medical attention, change in management protocols after post-operative complications, and mortality. Results: In total, 5,663 cases were included (mean age 66 ± 10 years, mean BMI 34.1 ± 7.1kg/m2). The overall post-operative complication rate was 0.9% (DVT: 0.5%, PE: 0.3%, VTE: 0.04%, and GI bleeding: 0.09%). Enoxaparin use as inpatient anticoagulation medication was reduced significantly (67% vs. 13%, p < 0.001), and apixaban was increased significantly (6% vs. 49%, p < 0.001). Average hospital stays were reduced significantly among the years (3 ± 2 days vs. 2 ± 1 days, p < 0.001), and complication rates were not significantly different between the five years (~1%, p < 0.001). Most post-operative complications occurred on either aspirin 325 mg (36%) or apixaban (26%). However, the relative risk ratio results indicating that utilization of warfarin, rivaroxaban, and aspirin 81 mg as outpatient anticoagulation medication were more likely to increase the risk of symptomatic VTE incidence compared to other anticoagulants. The average time of complication detected was 21 ± 21 days (range: 1 - 87 days). More than 54% of complication events occurred after the patient had completed their medication (enoxaparin, rivaroxaban, and apixaban). Conclusions: The observed incidence of symptomatic VTE in this study was similar to previous studies regardless of the type of post-operative inpatient or outpatient prophylaxis prescribed. The ultimate choice of prophylaxis should remain with the treating physician and their knowledge of a particular patient's medical history.

Telemedicine in Spine Surgery: Outcomes for 138 Patients With Virtual Preoperative Assessment Compared to Historical Controls.

INTRODUCTION: COVID-19 has accelerated the use of telemedicine in all aspects of health care delivery, including initial surgical evaluation. No existing literature investigates the safety and efficacy of telemedicine to preoperatively evaluate spine surgery candidates. Our objectives were: (1) Compare the change in visual analogue scale (VAS) scores between the telemedicine preoperative visit and in-person preoperative visit groups. (2) Compare the average surgical time, estimated blood loss (EBL), length of hospital stay (LOS), rates of intraoperative complications, rates of readmission, and rates of reoperation between the telemedicine preoperative visit and in-person preoperative visit groups. METHODS: The previously stated metrics were collected for 276 patients, 138 who were exclusively evaluated preoperatively with telemedicine and 138 historical controls who were evaluated preoperatively in person. We used χ2 and independent samples t tests to determine significance. RESULTS: There were no significant differences in the mean change in VAS scores (-2.7 ± 3.1 telemedicine vs. -2.2 ± 3.7 in-person, P = 0.317), mean percentage change in VAS scores (-40.5% ± 54.3% vs. -39.5% ± 66.6%, P = 0.811), mean surgical time (2.4 ± 1.4 hours vs. 2.3 ± 1.3 ours, P = 0.527), mean EBL (150.4 ± 173.3 mL vs. 156.7 ± 255.0 mL, P = 0.811), mean LOS (3.3 ± 2.4 days vs. 3.3 ± 2.5 days, P = 0.954), intraoperative complication rates (0.7% vs. 1.4%, P = 0.558), reoperation rates (7.9% vs. 4.3%, P = 0.208), or readmission rates (10.1% vs. 5.1%, P = 0.091) between the telemedicine preoperative visit and in-person preoperative visit groups. CONCLUSIONS: Preoperative evaluation via telemedicine leads to the same short-term surgical outcomes as in-person evaluation with no increased risk of surgical complications.

Contrasting recruitment of skin-associated adipose depots during cold challenge of mouse and human.

KEY POINTS: Several distinct strategies produce and conserve heat to maintain the body temperature of mammals, each associated with unique physiologies, with consequences for wellness and disease susceptibility Highly regulated properties of skin offset the total requirement for heat production  We hypothesize that the adipose component of skin is primarily responsible for modulating heat flux; here we evaluate the relative regulation of adipose depots in mouse and human, to test their recruitment to heat production and conservation We found that insulating mouse dermal white adipose tissue accumulates in response to environmentally and genetically induced cool stress; this layer is one of two adipose depots closely apposed to mouse skin, where the subcutaneous mammary gland fat pads are actively recruited to heat production In contrast, the body-wide adipose depot associated with human skin produces heat directly, potentially creating an alternative to the centrally regulated brown adipose tissue ABSTRACT: Mammalian skin impacts metabolic efficiency system-wide, controlling the rate of heat loss and consequent heat production. Here we compare the unique fat depots associated with mouse and human skin, to determine whether they have corresponding functions and regulation. For humans, we assay a skin-associated fat (SAF) body-wide depot to distinguish it from the subcutaneous fat pads characteristic of the abdomen and upper limbs. We show that the thickness of SAF is not related to general adiposity; it is much thicker (1.6-fold) in women than men, and highly subject-specific. We used molecular and cellular assays of ß-adrenergic-induced lipolysis and found that dermal white adipose tissue (dWAT) in mice is resistant to lipolysis; in contrast, the body-wide human SAF depot becomes lipolytic, generating heat in response to ß-adrenergic stimulation. In mice challenged to make more heat to maintain body temperature (either environmentally or genetically), there is a compensatory increase in thickness of dWAT: a corresponding ß-adrenergic stimulation of human skin adipose (in vivo or in explant) depletes adipocyte lipid content. We summarize the regulation of skin-associated adipocytes by age, sex and adiposity, for both species. We conclude that the body-wide dWAT depot of mice shows unique regulation that enables it to be deployed for heat preservation; combined with the actively lipolytic subcutaneous mammary fat pads they enable thermal defence. The adipose tissue that covers human subjects produces heat directly, providing an alternative to the brown adipose tissues.

Does Surgeon Subspecialty Training Affect Outcomes in the Treatment of Displaced Supracondylar Humerus Fractures in Children?

INTRODUCTION: The effect of the treating surgeon's subspecialty training on the outcomes of managing displaced supracondylar humerus fractures in the pediatric cohort remains under debate. The objective of this study was to examine patient outcomes and treatment variables for these injuries based on the surgeon subspecialty training. METHODS: A retrospective study of children who had undergone primary closed reduction and percutaneous fixation for displaced supracondylar humerus fractures was done from January 2012 through May 2019. The following four groups with differing orthopaedic subspecialty training were evaluated: (1) pediatric fellowship trained (2) trauma fellowship trained, (3) sports medicine fellowship trained, and (4) all others. Outcomes examined included time to surgery, surgical time, fluoroscopy usage, postoperative follow-up protocols, radiographic measurements of alignment, and complications between surgeon groups. RESULTS: Two hundred thirty-one cases were included (mean age 6 ± 2 years). Pediatric fellowship-trained surgeons took patients to surgery in a more delayed fashion (>12 hours, P = 0.02). Surgical time and fluoroscopy usage were significantly shorter for pediatric fellowship-trained surgeons (P < 0.001). No statistical difference was noted in pin configuration constructs between the groups. Pediatric fellowship-trained surgeons, on average, saw patients two times postoperatively within a year with most patients being within 30 days. Complications were not statistically different between the groups. CONCLUSIONS: Pediatric fellowship-trained orthopaedic surgeons provide more efficient care on a more delayed basis for displaced supracondylar humerus fractures than other subspecialty-trained orthopaedic surgeons. However, if barriers exist that limit the practicality or availability of these specialists, nonpediatric fellowship-trained surgeons achieve similar and satisfactory outcomes. LEVEL OF EVIDENCE: Level III retrospective cohort study.

Evaluation of a personal protective equipment support programme for staff during the COVID-19 pandemic in London.

BACKGROUND: The coronavirus disease 2019 pandemic has presented an enormous challenge to healthcare providers worldwide. The appropriate use of personal protective equipment (PPE) has been essential to ensure staff and patient safety. The 'PPE Helper Programme' was developed at a large London hospital group to counteract suboptimal PPE practice. Based on a behaviour change model of capability, opportunity and motivation (COM-B), the programme provided PPE support, advice and education to ward staff. AIM: Evaluation of the PPE Helper Programme. METHODS: Clinical and non-clinical ward staff completed a questionnaire informed by the Theoretical Domains Framework and COM-B model. The questionnaire was available in paper and electronic versions. Quantitative responses were analysed using descriptive and non-parametric statistics, and free-text responses were analysed thematically. FINDINGS: Over a 6-week period, PPE helpers made 268 ward visits. Overall, 261 questionnaires were available for analysis. Across the Trust, 68% of respondents reported having had contact with a PPE helper. Staff who had encountered a PPE helper responded significantly more positively to a range of statements about using PPE than staff who had not encountered a PPE helper. Black and minority ethnic staff were significantly more anxious regarding the adequacy of PPE. Non-clinical and redeployed staff (e.g. domestic staff) were most positive about the impact of PPE helpers. Free-text comments showed that staff found the PPE Helper Programme supportive and would have liked it earlier in the pandemic. CONCLUSION: The PPE Helper Programme is a feasible and beneficial intervention for providing support, advice and education to ward staff during infectious disease outbreaks.

Telemedicine in the Evaluation and Management of Neurosurgical Spine Patients: Questionnaire Assessment of 346 Consecutive Patients.

STUDY DESIGN: Retrospective questionnaire study of all patients seen via telemedicine during the COVID-19 pandemic at a large academic institution. OBJECTIVE: This aim of this study was to compare patient satisfaction of telemedicine clinic to in-person visits; to evaluate the preference for telemedicine to in-person visits; to assess patients' willingness to proceed with major surgery and/or a minor procedure based on a telemedicine visit alone. SUMMARY OF BACKGROUND DATA: One study showed promising utility of mobile health applications for spine patients. No studies have investigated telemedicine in the evaluation and management of spine patients. METHODS: An 11-part questionnaire was developed to assess the attitudes toward telemedicine for all patients seen within a 7-week period during the COVID-19 crisis. Patients were called by phone to participate in the survey. χ2 and the Wilcoxon Rank-Sum Test were performed to determine significance. RESULTS: Ninety-five percent were "satisfied" or "very satisfied" with their telemedicine visit, with 62% stating it was "the same" or "better" than previous in-person appointments. Patients saved a median of 105 minutes by using telemedicine compared to in-person visits. Fifty-two percent of patients have to take off work for in-person visits, compared to 7% for telemedicine. Thirty-seven percent preferred telemedicine to in-person visits. Patients who preferred telemedicine had significantly longer patient-reported in-person visit times (score mean of 171) compared to patients who preferred in-person visits (score mean of 137, P = 0.0007). Thirty-seven percent of patients would proceed with surgery and 73% would proceed with a minor procedure based on a telemedicine visit alone. CONCLUSION: Telemedicine can increase access to specialty care for patients with prolonged travel time to in-person visits and decrease the socioeconomic burden for both patients and hospital systems. The high satisfaction with telemedicine and willingness to proceed with surgery suggest that remote visits may be useful for both routine management and initial surgical evaluation for spine surgery candidates.Level of Evidence: 3.

Correction to: Low-chloride- versus high-chloride-containing hypertonic solution for the treatment of subarachnoid hemorrhage-related complications: The ACETatE (A low ChloriE hyperTonic solution for brain Edema) randomized trial.

[This corrects the article DOI: 10.1186/s40560-020-00449-0.].

Impact of Cigarette Smoking on Re-operation and Revision Surgery after Femoral Neck Fracture Treatment.

INTRODUCTION: Smokers and nicotine users have a higher risk of femoral neck fracture non-union and prolonged time to fracture union. The impact of smoking resulting in revision surgery after fixation of femoral neck fractures, however, rarely has been studied. The aim of this retrospective study was to review if cigarette smoking had an influence on re-operation and revision after femoral neck fracture treatment. METHODS: Three groups of patients (Group 1: active smokers; Group 2: former smokers; and Group 3: non-smokers) who sustained a femoral neck fracture from January 2012 through August 2018 were included. Outcomes investigated included femoral neck fracture type, operative fixation type, fixation failure, and time interval between initial fixation and revision. RESULTS: A total of 1,452 subjects were identified (Group 1: 165 subjects; Group 2: 507 subjects; and Group 3: 780 subjects). In the male population, Groups 1 and 2 had higher rates of femoral neck fracture than Group 3. Twelve cases required revisions (Group 1: three cases (6%); Group 2: two cases (2%); Group 3: seven cases (4%)), with all but one revision within the first year following initial fixation. Group 1 patients tended to be younger than the other two groups. CONCLUSION: Smoking has a positive association with the risk of femoral neck fracture amongst active and former male smokers. This study concluded that active smokers have a higher risk of non-union compared with non-smokers or former smokers. Smoking history, especially heavy or long-term, should play a role in deciding which fixation construct type to use for femoral neck fractures.