Localization of Craniomaxillofacial Landmarks on CBCT Images Using 3D Mask R-CNN and Local Dependency Learning.

Cephalometric analysis relies on accurate detection of craniomaxillofacial (CMF) landmarks from cone-beam computed tomography (CBCT) images. However, due to the complexity of CMF bony structures, it is difficult to localize landmarks efficiently and accurately. In this paper, we propose a deep learning framework to tackle this challenge by jointly digitalizing 105 CMF landmarks on CBCT images. By explicitly learning the local geometrical relationships between the landmarks, our approach extends Mask R-CNN for end-to-end prediction of landmark locations. Specifically, we first apply a detection network on a down-sampled 3D image to leverage global contextual information to predict the approximate locations of the landmarks. We subsequently leverage local information provided by higher-resolution image patches to refine the landmark locations. On patients with varying non-syndromic jaw deformities, our method achieves an average detection accuracy of 1.38± 0.95mm, outperforming a related state-of-the-art method.

Two-Stage Treatment of a Large Premaxillary Defect.

ABSTRACT: Bilateral cleft lip and palate (CLP) patients commonly require surgical management to treat maxillary hypoplasia following the primary repair. Rarer is the CLP patient who also presents with a missing premaxillary segment. Here the authors present the case of a 19-year-old female with a history of bilateral CLP who demonstrated significant maxillary hypoplasia in addition to a large premaxillary defect. To correct this deformity, LeFort I advancement with fibular reconstruction of the maxilla and dental implant placement was performed as a single surgical procedure. The authors discuss the advantages of undergoing this single-staged operation. By utilizing virtual surgical planning (VSP) and incorporating a multidisciplinary team within the operating room, the patient was able to successfully undergo maxillary reconstruction and dental implant placement in a single operation.

Automatic Localization of Landmarks in Craniomaxillofacial CBCT Images Using a Local Attention-Based Graph Convolution Network.

Landmark localization is an important step in quantifying craniomaxillofacial (CMF) deformities and designing treatment plans of reconstructive surgery. However, due to the severity of deformities and defects (partially missing anatomy), it is difficult to automatically and accurately localize a large set of landmarks simultaneously. In this work, we propose two cascaded networks for digitizing 60 anatomical CMF landmarks in cone-beam computed tomography (CBCT) images. The first network is a U-Net that outputs heatmaps for landmark locations and landmark features extracted with a local attention mechanism. The second network is a graph convolution network that takes the features extracted by the first network as input and determines whether each landmark exists via binary classification. We evaluated our approach on 50 sets of CBCT scans of patients with CMF deformities and compared them with state-of-the-art methods. The results indicate that our approach can achieve an average detection error of 1.47mm with a false positive rate of 19%, outperforming related methods.

A New Approach of Predicting Facial Changes following Orthognathic Surgery using Realistic Lip Sliding Effect.

Accurate prediction of facial soft-tissue changes following orthognathic surgery is crucial for improving surgical outcome. However, the accuracy of current prediction methods still requires further improvement in clinically critical regions, especially the lips. We develop a novel incremental simulation approach using finite element method (FEM) with realistic lip sliding effect to improve the prediction accuracy in the area around the lips. First, lip-detailed patient-specific FE mesh is generated based on accurately digitized lip surface landmarks. Second, an improved facial soft-tissue change simulation method is developed by applying a lip sliding effect in addition to the mucosa sliding effect. The soft-tissue change is then simulated incrementally to facilitate a natural transition of the facial change and improve the effectiveness of the sliding effects. A preliminary evaluation of prediction accuracy was conducted using retrospective clinical data. The results showed that there was a significant prediction accuracy improvement in the lip region when the realistic lip sliding effect was applied along with the mucosa sliding effect.

Estimating Reference Bony Shape Model for Personalized Surgical Reconstruction of Posttraumatic Facial Defects.

In this paper, we introduce a method for estimating patient-specific reference bony shape models for planning of reconstructive surgery for patients with acquired craniomaxillofacial (CMF) trauma. We propose an automatic bony shape estimation framework using pre-traumatic portrait photographs and post-traumatic head computed tomography (CT) scans. A 3D facial surface is first reconstructed from the patient's pre-traumatic photographs. An initial estimation of the patient's normal bony shape is then obtained with the reconstructed facial surface via sparse representation using a dictionary of paired facial and bony surfaces of normal subjects. We further refine the bony shape model by deforming the initial bony shape model to the post-traumatic 3D CT bony model, regularized by a statistical shape model built from a database of normal subjects. Experimental results show that our method is capable of effectively recovering the patient's normal facial bony shape in regions with defects, allowing CMF surgical planning to be performed precisely for a wider range of defects caused by trauma.

The Use of Patient-Specific Implants in Oral and Maxillofacial Surgery.

This article summarizes the current use of patient-specific implants in oral and maxillofacial surgery.

Design, development and clinical validation of computer-aided surgical simulation system for streamlined orthognathic surgical planning.

PURPOSE: There are many proven problems associated with traditional surgical planning methods for orthognathic surgery. To address these problems, we developed a computer-aided surgical simulation (CASS) system, the AnatomicAligner, to plan orthognathic surgery following our streamlined clinical protocol. METHODS: The system includes six modules: image segmentation and three-dimensional (3D) reconstruction, registration and reorientation of models to neutral head posture, 3D cephalometric analysis, virtual osteotomy, surgical simulation, and surgical splint generation. The accuracy of the system was validated in a stepwise fashion: first to evaluate the accuracy of AnatomicAligner using 30 sets of patient data, then to evaluate the fitting of splints generated by AnatomicAligner using 10 sets of patient data. The industrial gold standard system, Mimics, was used as the reference. RESULT: When comparing the results of segmentation, virtual osteotomy and transformation achieved with AnatomicAligner to the ones achieved with Mimics, the absolute deviation between the two systems was clinically insignificant. The average surface deviation between the two models after 3D model reconstruction in AnatomicAligner and Mimics was 0.3 mm with a standard deviation (SD) of 0.03 mm. All the average surface deviations between the two models after virtual osteotomy and transformations were smaller than 0.01 mm with a SD of 0.01 mm. In addition, the fitting of splints generated by AnatomicAligner was at least as good as the ones generated by Mimics. CONCLUSION: We successfully developed a CASS system, the AnatomicAligner, for planning orthognathic surgery following the streamlined planning protocol. The system has been proven accurate. AnatomicAligner will soon be available freely to the boarder clinical and research communities.

Tissue-engineered autologous grafts for facial bone reconstruction.

Facial deformities require precise reconstruction of the appearance and function of the original tissue. The current standard of care-the use of bone harvested from another region in the body-has major limitations, including pain and comorbidities associated with surgery. We have engineered one of the most geometrically complex facial bones by using autologous stromal/stem cells, native bovine bone matrix, and a perfusion bioreactor for the growth and transport of living grafts, without bone morphogenetic proteins. The ramus-condyle unit, the most eminent load-bearing bone in the skull, was reconstructed using an image-guided personalized approach in skeletally mature Yucatán minipigs (human-scale preclinical model). We used clinically approved decellularized bovine trabecular bone as a scaffolding material and crafted it into an anatomically correct shape using image-guided micromilling to fit the defect. Autologous adipose-derived stromal/stem cells were seeded into the scaffold and cultured in perfusion for 3 weeks in a specialized bioreactor to form immature bone tissue. Six months after implantation, the engineered grafts maintained their anatomical structure, integrated with native tissues, and generated greater volume of new bone and greater vascular infiltration than either nonseeded anatomical scaffolds or untreated defects. This translational study demonstrates feasibility of facial bone reconstruction using autologous, anatomically shaped, living grafts formed in vitro, and presents a platform for personalized bone tissue engineering.

Bupivacaine mandibular nerve block affects intraoperative blood pressure and heart rate in a Yucatan miniature swine mandibular condylectomy model: a pilot study.

PURPOSE/AIM: The primary objective was to evaluate the effect of a bupivacaine mandibular nerve block on intraoperative blood pressure (BP) and heart rate (HR) in response to surgical stimulation and the need for systemic analgesics postoperatively. We hypothesized that a mandibular nerve block would decrease the need for systemic analgesics both intraoperatively and postoperatively. MATERIALS AND METHODS: Fourteen adult male Yucatan pigs were purchased. Pigs were chemically restrained with ketamine, midazolam, and dexmedetomidine and anesthesia was maintained with isoflurane inhalant anesthesia. Pigs were randomized to receive a mandibular block with either bupivacaine (bupivacaine group) or saline (control group). A nerve stimulator was used for administration of the block with observation of masseter muscle twitch to indicate the injection site. Invasive BP and HR were measured with the aid of an arterial catheter in eight pigs. A rescue analgesic protocol consisting of fentanyl and lidocaine was administered if HR or BP values increased 20% from baseline. Postoperative pain was quantified with a customized ethogram. HR and BP were evaluated at base line, pre-rescue, 10 and 20 min post-rescue. RESULTS: Pre-rescue mean BP was significantly increased (p = .001) for the bupivacaine group. Mean intraoperative HR was significantly lower (p = .044) in the bupivacaine versus saline group. All other parameters were not significant. CONCLUSION: Addition of a mandibular nerve block to the anesthetic regimen in the miniature pig condylectomy model may improve variations in intraoperative BP and HR. This study establishes the foundation for future studies with larger animal numbers to confirm these preliminary findings.

Diagnostic imaging for submandibular duct atresia: literature review and case report.

PURPOSE: The basic aim of this review was to retrospectively study the role of imaging, particularly magnetic resonance imaging, in the diagnosis of submandibular duct (SMD) orifice atresia. MATERIALS AND METHODS: From a literature review, data were collected from previously reported cases of imaged SMD atresia and from the present case. RESULTS: Five images, 4 from the literature and 1 magnetic resonance image from our case, were obtained to illustrate the singular appearance of SMD orifice atresia. CONCLUSIONS: To the authors' knowledge, this is the first study, using a review of the literature concerning SMD orifice atresia, to call specific attention to the role imaging plays in illustrating the pathognomonic presence of the uniquely dilated and segmented salivary duct seen in SMD orifice atresia.

Nicotine nasal spray as an adjuvant analgesic for third molar surgery.

PURPOSE: To determine the efficacy of preoperatively administered nicotine nasal spray (3 mg) for analgesia after third molar (TM) surgery. MATERIALS AND METHODS: A single-center, prospective, randomized, double-blind, crossover trial was conducted. The study population consisted of 20 nonsmoking patients referred to the Department of Oral and Maxillofacial Surgery of Columbia University College of Dental Medicine for extraction of all 4 TMs. Each patient received nicotine nasal spray or placebo spray before TM surgery. At a subsequent visit the contralateral TMs were removed with prior administration of the alternate treatment. For an hour postoperatively, subjects reported information on pain and nausea, and hemodynamic variables were recorded at 15-minute intervals. Telephone follow-up was recorded for 5 days postoperatively, where patients reported information on pain, nausea, and use of hydrocodone/acetaminophen as rescue analgesia. RESULTS: Nicotine treatment was associated with a highly significant decrease in pain reported during the 5 days after TM surgery. There was no difference in the amount of hydrocodone/acetaminophen used or amount of nausea reported. There was a small but significant increase in heart rate after nicotine treatment compared with placebo during the first hour after surgery. There was no difference in blood pressure between groups. CONCLUSION: Pain is well controlled by hydrocodone/acetaminophen in most patients after TM surgery. However, there is significant variability in pain reported. Nicotinic agonists represent a new class of analgesic that can be considered for patients who are expected to have significant opioid-resistant pain after TM surgery. Caution should be used with patients in whom a small increase in heart rate would be deleterious.

Drug-induced paraparotid fat deposition in patients with HIV: case reports.

BACKGROUND: The treatment of patients with HIV is managed effectively with highly active antiretroviral therapy, but complications in the form of a lipodystrophy syndrome (LDS) often develop. CASE DESCRIPTION: . The authors describe two patients who had bilateral parotid area fatty swellings, which are a manifestation of the fat redistribution seen in LDS. Fat hypertrophy, fat atrophy or both in other regions; dyslipidemia; and glucose abnormalities also were present. CONCLUSION AND CLINICAL IMPLICATIONS: Although the LDS in patients with HIV is recognized visibly by fat redistribution, the syndrome includes dyslipidemia and insulin resistance. Dental visits give dentists the opportunity to recognize HIV-related cervicofacial fat alterations. For appropriate attention, referral to the patient's physician who is managing the HIV is indicated.