Potential health risk assessment for heavy metals in Tilapia fish of different spatiotemporal monitoring patterns in Kafr El-Shaikh and El-Faiyum Governorates of Egypt.

Heavy metal (HMs) levels were evaluated in aquacultured tilapia fish collected from two highly producing districts in Egypt (Kafr El-Sheikh and El-Faiyum Governorates) during two seasons (autumn 2021 and spring 2022). As well, health risk assessment of exposure to HMs in tilapia fish was studied. The results revealed that six HMs: As, Cu, Fe, Mn, Cr and Zn were predominant in fish samples of the first season (autumn 2021), while most of HMs were existed in samples of the second season. All samples of the two seasons were free of Hg. Notably, autumn season's fish samples showed higher concentrations of HMs than those of the spring season. As well, Kafr El-Sheikh farms were highly contaminated with HMs than those of El-Faiyum governorate. Risk assessment results indicated that the THQ values of As substantially exceeded 1 either for Kafr El-Shaikh samples (3.15 ± 0.5) or for El-Faiyum samples (2.39 ± 0.8) of autumn season. Meanwhile, THQ values for all HMs, in spring season 2021, were less than one whole. These results indicated a potential health risk arising from the exposure to HMs, As in particular, in fish samples of autumn season as compared to those of spring season. Therefore, there is a need for remedial applications, in such polluted aquacultures in autumn season, which are currently under investigation as an integral part of the research project that funded the current study.

Mass flow and consumption calculations of pharmaceuticals in sewage treatment plant with emphasis on the fate and risk quotient assessment.

In Egypt, pharmaceuticals consumption increased dramatically owing to the population growth and the unrestricted sale manner. Accordingly, the occurrence and fate of nine common pharmaceutical active compounds (PhACs) were scrutinized at a sewage treatment plant (STP) in Giza, Egypt. The levels of these PhACs were assessed in different the wastewater treatment stages and dewatered sludge phase using high-performance liquid chromatography coupled with photodiode arrays detector. The average concentrations of the total PhACs detected in influent, primary sedimentation effluent (PSE) and final effluent (FE) were 227, 155 and 89 µg L-1, respectively. The overall removal efficiency of the individual PhACs ranged from 18 to 72% removal. The occurrence trend revealed that biodegradation and adsorption are the concurrently removal mechanisms of the studied PhACs. The overall consumption per day in West of Greater Cairo was estimated based on influent concentration of STP. Sulfamethoxazole, paracetamol and diclofenac were detected with the highest levels in the influent of STP, PSE and FE as well as in the dewatered sludge. Furthermore, the high concentrations of these compounds in the sludge confirm the adsorption pathway removal of theses PhACs. The risk quotient (RQ) assessment for the detected PhACs in FE is greatly higher than the predicted non-effect concentration (PNEC). Conclusively, the FE of STP is considered a risky source for PhACs in adjacent surface water.

Innovative green/non-toxic Bi2S3@g-C3N4 nanosheets for dark antimicrobial activity and photocatalytic depollution: Turnover assessment.

Herein, green and non-toxic bismuth sulphide@graphitic carbon nitride (Bi2S3@g-C3N4) nanosheets (NCs) were firstly synthesized by ultrasonicated-assisted method and characterized with different tool. Bi2S3@g-C3N4 NCs antimicrobial activity tested against three types of microbes. As well the heterostructured Bi2S3@g-C3N4 NCs was investigated for removing dye and hexavalent chromium under visible light and showed high efficiency of photocatalytic oxidation/reduction higher than g-C3N4 alone, attributing to lower recombination photogenerated electron-hole pairs. Bi2S3@g-C3N4 NCs showed high antimicrobial efficiencies against Staphylococcus aureus (S. aureus) as a Gram positive bacterium, Escherichia coli (E. Coli)as a Gram negative bacterium and Candida albicans (C. albicans) and that the disinfection rates are 99.97%, 99.98% and 99.92%, respectively. The core mechanism is that the bacterial membrane could be destroyed by reactive oxygen species. The Bi2S3@g-C3N4 NCs is promising for environmental disinfection including water and public facilities disinfection and solar photocatalytic depollution. Turnover number (TON) and Turnover frequency (TOF) are used as concise assessment indicator for photocatalytic efficiency.

Utilization of activated carbon for maximizing the efficiency of zirconium oxide for photodegradation of 4-octylphenol.

Utilization of AC/zirconium oxide (ZrO2) for the removal of 4-octylphenol (4-OP) from aqueous solution has been studied under simulated visible-light as a cost effective technique. To draw complete images for the prepared materials, a series of characterization methods was performed. Brunauer-Emmett-Teller (BET) data has proved that AC has high surface area and total pore volumes that are decreased after incorporation of ZrO2. Morphologically, TEM showed massive quantity of ZrO2 spherical shape nanoparticles loaded with carbon and EDX showed the uniform distribution of all the prepared materials. The photocatalytic performance has been traced via adopting a matrix effect analysis to correlate the photodegradation of 4-OP in the presence of visible light as a time function, pH, photocatalyst dose and initial concentration of 4-OP. The positive impact of AC content in AC/ZrO2 composite on the adsorption of 4-OP was strikingly observed with expanding the AC content in AC/ZrO2 composite up to 33% (wt/wt). Almost 97% of the 4-OP was removed within 180 min under simulated visible light. The optimum reaction conditions for 95% removal of 4-OP were 120 min, 1 g L-1 catalyst dose at pH 8. The photocatalytic degradation of the 4-OP was well fitted with pseudo first-order L-H kinetic model.

Revealing the role of the 1T phase on the adsorption of organic dyes on MoS2 nanosheets.

Herein, different phases of MoS2 nanosheets were synthesized, characterized and tested for dye removal from water. The influence of the MoS2 phases as well as the 1T concentration on the adsorption performance of organic dyes MO, RhB and MB was deeply investigated. The results revealed that the 1T-rich MoS2 nanosheets have superior adsorption performance compared to other 2H and 3R phases. The kinetic results of the adsorption process demonstrate that the experimental data followed the pseudo-second order equation. Meanwhile, the adsorption of dyes over the obtained materials was fitted with several isotherm models. The Langmuir model gives the best fitting to the experimental data with maximum a adsorption capacity of 787 mg g-1. The obtained capacity is significantly higher than that of all previous reports for similar MoS2 materials. Computational studies of the 2H and 1T/2H-MoS2 phases showed that the structural defects present at the 1T/2H grain boundaries enhance the binding of hydroxide and carboxyl groups to the MoS2 surface which in turn increase the adsorption properties of the 1T/2H-MoS2 phase.

Removal of pharmaceutical pollutants from synthetic wastewater using chemically modified biomass of green alga Scenedesmus obliquus.

Pharmaceutical compounds are considered emerging environmental pollutants that have a potential harmful impact on environment and human health. In this study, the biomass of alga (Scenedesmus obliquus) was modified using alkaline solution, and used for the biosorption of tramadol (TRAM) and other pharmaceuticals. The adsorption kinetics and isotherms were investigated. The obtained results reveal high adsorption capacity of tramadol over modified algal biomass (MAB) after 45min with removal percentage of 91%. Pseudo-second order model was well fitted with the experimental data with correlation coefficient (0.999). Biosorption of tramadol on modified algal biomass proceeds with Freundlich isotherm model with correlation coefficient (0.942) that emphasized uptake of TRAM by MAB is driven by chemisorption. FTIR spectra of MAB before and after the adsorption were analyzed; some IR bands were detected with slight shift and low intensity suggesting their involving in adsorption. The tramadol biosorption by MAB is a chemical process as confirmed by Dubinin-Radushkevich. The adsorption of pharmaceutical over MAB is mainly preceded by hydrophilic interactions between amino and carbonyl groups in pharmaceutical molecules and hydroxyl and carbonyl functional groups on surface of biosorbent. It was emphasized by disappearance O-H and C-O from biomass IR spectra after adsorption. In matrix of pharmaceutical, the recorded adsorption capacities for CEFA, PARA, IBU, TRAM and CIP are 68, 58, 42, 42 and 39mg/g over MAB at natural pH and MAB dose of 0.5g/L. Furthermore, oxygen uptake by bacteria was applied for estimate the toxicity of pharmaceutical. The recorded result concluded the efficient reusability of modified algal biomass for biosorption of pharmaceuticals, as well only the adsorption efficiency decreased by 4.5% after three runs. Subsequently, the modified algal biomass is a promising reusable adsorbent for decontamination of wastewater from pharmaceuticals.

Minimization of the formation of disinfection by-products.

The drinking water industry is required to minimize DBPs levels while ensuring adequate disinfection. In this study, efficient and appropriate treatment scheme for the reduction of disinfection by-product (DBPs) formation in drinking water containing natural organic matter has been established. This was carried out by the investigation of different treatment schemes consisting of enhanced coagulation, sedimentation, disinfection by using chlorine dioxide/ozone, filtration by sand filter, or granular activated carbon (GAC). Bench scale treatment schemes were applied on actual samples from different selected sites to identify the best conditions for the treatment of water. Samples were collected from effluent of each step in the treatment train in order to analyze pH, UV absorbance at 254 nm (UVA(254)), specific UV absorbance at 254 nm (SUVA(254)), dissolved organic carbon (DOC), haloacetic acids (HAAs) and trihalomethanes (THMs). The obtained results indicated that using pre-ozonation/enhanced coagulation/activated carbon filtration treatment train appears to be the most effective method for reducing DBPs precursors in drinking water treatment.

Photocatalytic oxidation of ciprofloxacin under simulated sunlight.

Ciprofloxacin (CIP) is a famous synthetic chemotherapeutic antibiotic. It is widely found either in water or wastewater. In this study ciprofloxacin was photocatalytically degraded using commercial anatase titanium dioxide (TiO(2)) under simulated sunlight. The rate of reaction was found to be affected by pH, TiO(2) concentration and antibiotic concentration. The best reaction rate was obtained in natural ciprofloxacin pH (5.8) and 1000 mg/L TiO(2). More titania concentration was found to reduce the reaction rate because of the limitation in light transmittance. From kinetic studies, the reaction was proved to proceed through adsorption step then photooxidation and obeys pseudo-first order kinetics.