ABSTRACT
Introduction: This study investigated the effect of fractional CO2 laser on shear bond strength (SBS) of resin cement to feldspathic porcelain. Methods: Sixty blocks of unglazed feldspathic porcelain were randomly divided into 5 groups of 12 by treatment. Group 1 and 2 underwent etching with 9.6% hydrofluoric acid (HF) and air abrasion with alumina particles, respectively. In groups 3 and 4, a fractional CO2 laser was applied for 10 seconds using 20 W/10 mJ (group 3) or 15 W/20 mJ (group 4). The specimens in group 5 were first treated by fractional CO2 laser (15 W/20 mJ) and then etched by HF acid. After silane application, a resin cement (Clearfil SA) was poured into plastic molds over the porcelain surface and light cured. SBS was assessed by a universal testing machine and the type of bond failure was determined. Results: Analysis of variance (ANOVA) indicated a significant difference in SBS among the study groups (P<0.001). Pairwise comparison demonstrated that the application of fractional CO2 laser followed by HF acid yielded SBS that was significantly greater than that of the other groups (P<0.05). The SBS of both laser groups (groups 3 and 4) were comparable to each other and significantly lower than the other groups (P<0.05). No significant difference was found in the distribution of failure modes among the groups (P=0.522) Conclusion: The application of fractional CO2 laser followed by HF acid treatment can improve SBS of resin cement to feldspathic porcelain and could be recommended when demanding extra retention.
ABSTRACT
BACKGROUND: This study investigated the impact of different surface treatments, including fractional carbon dioxide (CO2) laser on shear bond strength (SBS) of resin cement to lithium disilicate ceramic. MATERIALS AND METHODS: In this in vitro study, 72 blocks of IPS e.max CAD ceramic were randomly divided into six groups in terms of treatment (n = 12). Group 1 underwent etching with 9.6% hydrofluoric (HF) acid, whereas group 2 was subjected to air abrasion with aluminum oxide particles. Groups 3 and 4 were treated with a fractional CO2 laser for 10 s using 10 W/14 mJ (group 3) or 20 W/10 mJ (group 4). In groups 5 and 6, the CO2 laser was applied similar to that in groups 3 and 4, respectively; then, the specimens were etched by HF acid. After silane application, luting cement was bonded to the specimens. The SBS was assessed with a universal testing machine, and the type of bond failure was determined. Data were analyzed by ANOVA, Duncan, and Fisher's exact tests. RESULTS: Surface conditioning with fractional CO2 laser alone resulted in significantly lower SBS than HF acid treatment (P < 0.05). Bond strengths of the specimens treated with a combination of laser irradiation and acid etching were significantly greater than all the other groups (P < 0.05). No significant difference was found in the distribution of failure modes among the groups (P = 0.337). CONCLUSION: The combination of fractional CO2 laser irradiation and HF acid etching could be recommended when extra retention is required for lithium disilicate-based restorations, whereas laser treatment alone cannot produce sufficient SBS.
ABSTRACT
AIMS: The present study investigated the effect of different surface treatments on shear bond strength (SBS) of resin cement to zirconia. MATERIALS AND METHODS: Ninety zirconia blocks were prepared and divided into 6 groups of 15 by treatment. Group 1 served as the control group, whereas groups 2 and 3 were treated with air abrasion and a universal primer (Monobond plus), respectively. The remaining zirconia copings were treated with a fractional CO2 laser for 10 seconds using 10 W/10 mJ (group 4), 10 w/14 mJ (group 5) or 20 W/10 mJ (group 6). A luting cement (Clearfil SA) was bonded to the treated zirconia surfaces and cured for 40 seconds. SBS was measured with a universal testing machine and the type of bond failure was determined. RESULTS: There was a statistically significant difference in SBS among the study groups (p<0.001). The highest SBS values were observed in the groups treated with the fractional CO2 laser at settings of 20 W/10 mJ (28.1 MPa) or 10 W/14 mJ (27.4 MPa), followed by the specimens treated with the universal primer (22.8 MPa). The control specimens exhibited the lowest SBS (9.4 MPa) among the study groups (p<0.05). There was no significant difference in the distribution of failure modes among the groups (p=0.871). CONCLUSIONS: The application of fractional CO2 laser can improve bond strength of resin cement to zirconia ceramic, and thus it could be considered as an appropriate alternative to conventional methods of zirconia surface treatment.
