An OpenSim thoracolumbar spine model applying a bottom-up modelling approach is similar to a top-down approach.

The kinetic demands of the spine can be assessed using a top-down (TD) or bottom-up (BU) approach, which start calculations from the either the hands or from the feet, respectively. Biomechanists have traditionally favored a BU approach, though existing modeling approaches encourage a TD approach. Regardless of the approach the demands should be similar, provided the external forces and linked segment parameters are equivalently measured and modeled. Demonstrating a level of agreement between the two approaches can help evaluate a model. Further, having both approaches can be advantageous when data is inaccurate or unavailable for one. The purpose of this study was to compare the internal moments and forces at multiple lumbar and thoracic intervertebral joint (IVJ) levels during lifting tasks from an established OpenSim thoracolumbar spine model that applies a TD approach and a similar model modified to adopt a BU approach. Kinematics and external forces were recorded from twelve participants during sagittal and lateral lifts of different lifting speeds and crate masses. For both approaches IVJ kinetics were estimated using a standard OpenSim modeling pipeline. The BU and TD approach IVJ joint moments generally agreed both temporally (R2 = .94 ± .17) and in magnitude (RMSE=6.2 ± 3.5 Nm) of the primary planes of movement. There were however some temporal fit exceptions for off axes moments with low magnitudes (i.e., < 10 Nm). Bland-Altman plots also indicated acceptable agreement for IVJ peak forces (BU-TD difference of 12 ± 111 and 8 ± 31 N in compression and resultant shear, respectfully). These results support the application of the BU approach and the assigned linked segment parameters of the model. The new BU model is available on the SimTK site (https://simtk.org/projects/spine_ribcage).

Changes in Vertebral Bone Density and Paraspinal Muscle Morphology Following Spaceflight and 1 Year Readaptation on Earth.

Astronauts have an increased risk of back pain and disc herniation upon returning to Earth. Thus, it is imperative to understand the effects of spaceflight and readaptation to gravity on the musculoskeletal tissues of the spine. Here we investigated whether ~6 months of spaceflight led to regional differences in bone loss within the vertebral body. Additionally, we evaluated the relationships between vertebral bone density and paraspinal muscle morphology before flight, after flight, and after readaptation on Earth. We measured vertebral trabecular bone mineral density (Tb.BMD), paraspinal muscle cross-sectional area (CSA), and muscle density in 17 astronauts using computed tomography (CT) images of the lumbar spine obtained before flight (before flight, n = 17), after flight (spaceflight, n = 17), and ~12 months of readaptation to gravitational loading on Earth (follow-up, n = 15). Spaceflight-induced declines in Tb.BMD were greater in the superior region of the vertebral body (-6.7%) than the inferior (-3.1%, p = 0.052 versus superior region) and transverse regions (-4.3%, p = 0.057 versus superior region). After a year of readaptation to Earth's gravity, Tb.BMD in the transverse region remained significantly below preflight levels (-4.66%, p = 0.0094). Paraspinal muscle CSA and muscle density declined -1.0% (p = 0.005) and -0.83% (p = 0.001) per month of spaceflight, respectively. Ultimately, bone loss in the superior vertebral body, along with fatty infiltration of paraspinal muscles and incomplete recovery even after a year of readaptation on Earth, may contribute to spinal pathology in long-duration astronauts. © 2023 The Authors. JBMR Plus published by Wiley Periodicals LLC on behalf of American Society for Bone and Mineral Research.

Dependence of trunk muscle size and position on age, height, and weight in a multi-ethnic cohort of middle-aged and older men and women.

Trunk muscle size and location relative to the spine are key factors affecting their capacity to assist in trunk movement, strength, and function. There remains limited information on how age, weight and height affect these measurements across multiple spinal levels, and prior studies had limited samples in terms of size and ethnicity. In this study, we measured trunk muscles in coronal plane slices at T4 - L4 of CT scans acquired in 507 participants, aged 40-90 years, from the community-based Framingham Heart Study. Mixed-effects linear regressions, stratified by sex, determined the contributions of age, height and weight, to muscle cross-sectional area (CSA), the distance from the vertebral body centroid (CD), and the in-plane angle of the line between the vertebral body and the muscle centroids (CA). Muscle CSA decreased with higher age by an average of -0.8% per year, but weight (average 0.8% per kg) and height (average -0.05% per cm) had mixed results, with both positive and negative effects depending on muscle group and level. Muscle CD increased with weight by an average of 0.3% per kg, but had mixed effects for age (average 0.8% per year) and height (average 0.1% per cm). Muscle CA had mixed associations with age (average 0.05% per year), weight (average 0.01% per kg) and height (average -0.05% per cm). A prediction program created with these results provides a simple approach for estimating probable values for trunk muscle size and position in the absence of medical imaging.

EMG Validation of a Subject-Specific Thoracolumbar Spine Musculoskeletal Model During Dynamic Activities in Older Adults.

Musculoskeletal models can uniquely estimate in vivo demands and injury risk. In this study, we aimed to compare muscle activations from subject-specific thoracolumbar spine OpenSim models with recorded muscle activity from electromyography (EMG) during five dynamic tasks. Specifically, 11 older adults (mean = 65 years, SD = 9) lifted a crate weighted to 10% of their body mass in axial rotation, 2-handed sagittal lift, 1-handed sagittal lift, and lateral bending, and simulated a window opening task. EMG measurements of back and abdominal muscles were directly compared to equivalent model-predicted activity for temporal similarity via maximum absolute normalized cross-correlation (MANCC) coefficients and for magnitude differences via root-mean-square errors (RMSE), across all combinations of participants, dynamic tasks, and muscle groups. We found that across most of the tasks the model reasonably predicted temporal behavior of back extensor muscles (median MANCC = 0.92 ± 0.07) but moderate temporal similarity was observed for abdominal muscles (median MANCC = 0.60 ± 0.20). Activation magnitude was comparable to previous modeling studies, and median RMSE was 0.18 ± 0.08 for back extensor muscles. Overall, these results indicate that our thoracolumbar spine model can be used to estimate subject-specific in vivo muscular activations for these dynamic lifting tasks.

Using static postures to estimate spinal loading during dynamic lifts with participant-specific thoracolumbar musculoskeletal models.

Static biomechanical simulations are sometimes used to estimate in vivo kinetic demands because they can be solved efficiently, but this ignores any potential inertial effects. To date, comparisons between static and dynamic analyses of spinal demands have been limited to lumbar joint differences in young males performing sagittal lifts. Here we compare static and dynamic vertebral compressive and shear force estimates during axial, lateral, and sagittal lifting tasks across all thoracic and lumbar vertebrae in older men and women. Participant-specific thoracolumbar full-body musculoskeletal models estimated vertebral forces from recorded kinematics both with and without consideration of dynamic effects, at an identified frame of peak vertebral loading. Static analyses under-predicted dynamic compressive and resultant shear forces, by an average of about 16% for all three lifts across the thoracic and lumbar spine but were highly correlated with dynamic forces (average r2 > .95). The study outcomes have the potential to enable standard clinical and occupational estimates using static analyses.

Accumulation in Visceral Adipose Tissue Over 6 Years Is Associated With Lower Paraspinal Muscle Density.

CONTEXT: Visceral adipose tissue (VAT) has been recognized to be a metabolically active fat depot that may have paracrine effects on surrounding tissues, including muscle. Since many adults accumulate VAT as they age, the effect of changes in VAT on muscle is of interest. OBJECTIVE: We determined the association between 6-year changes in VAT and paraspinal muscle density, an indicator of fatty infiltration. METHODS: This study included 1145 participants from the Framingham Study third-generation cohort who had both quantitative computed tomography scans of the spine at baseline and 6-year's follow-up, on whom muscle density was measured along with VAT. We implemented multiple regression to determine the association of muscle density at follow-up as primary outcome measure with changes in VAT (follow-up minus baseline divided by 100), adjusting for VAT at baseline, age, sex, height, menopausal status, presence of diabetes, and physical activity. Analyses were performed in men and women separately. RESULTS: After adjustment for covariates, individuals with the greatest accumulation of VAT over 6 years had significantly lower paraspinal density at the follow-up with an estimated 0.302 (95% CI, -0.380 to -0.224) and 0.476 (95% CI: -0.598 to -0.354) lower muscle density (HU) per 100-cm3 increase in VAT (both P values < .001) in men and women, respectively. CONCLUSION: These results highlight that age-related accumulation of VAT in men and women is associated with lower muscle density. VAT may represent a modifiable risk factor for poor musculoskeletal outcomes with aging.

Evaluation of Load-To-Strength Ratios in Metastatic Vertebrae and Comparison With Age- and Sex-Matched Healthy Individuals.

Vertebrae containing osteolytic and osteosclerotic bone metastases undergo pathologic vertebral fracture (PVF) when the lesioned vertebrae fail to carry daily loads. We hypothesize that task-specific spinal loading patterns amplify the risk of PVF, with a higher degree of risk in osteolytic than in osteosclerotic vertebrae. To test this hypothesis, we obtained clinical CT images of 11 cadaveric spines with bone metastases, estimated the individual vertebral strength from the CT data, and created spine-specific musculoskeletal models from the CT data. We established a musculoskeletal model for each spine to compute vertebral loading for natural standing, natural standing + weights, forward flexion + weights, and lateral bending + weights and derived the individual vertebral load-to-strength ratio (LSR). For each activity, we compared the metastatic spines' predicted LSRs with the normative LSRs generated from a population-based sample of 250 men and women of comparable ages. Bone metastases classification significantly affected the CT-estimated vertebral strength (Kruskal-Wallis, p < 0.0001). Post-test analysis showed that the estimated vertebral strength of osteosclerotic and mixed metastases vertebrae was significantly higher than that of osteolytic vertebrae (p = 0.0016 and p = 0.0003) or vertebrae without radiographic evidence of bone metastasis (p = 0.0010 and p = 0.0003). Compared with the median (50%) LSRs of the normative dataset, osteolytic vertebrae had higher median (50%) LSRs under natural standing (p = 0.0375), natural standing + weights (p = 0.0118), and lateral bending + weights (p = 0.0111). Surprisingly, vertebrae showing minimal radiographic evidence of bone metastasis presented significantly higher median (50%) LSRs under natural standing (p < 0.0001) and lateral bending + weights (p = 0.0009) than the normative dataset. Osteosclerotic vertebrae had lower median (50%) LSRs under natural standing (p < 0.0001), natural standing + weights (p = 0.0005), forward flexion + weights (p < 0.0001), and lateral bending + weights (p = 0.0002), a trend shared by vertebrae with mixed lesions. This study is the first to apply musculoskeletal modeling to estimate individual vertebral loading in pathologic spines and highlights the role of task-specific loading in augmenting PVF risk associated with specific bone metastatic types. Our finding of high LSRs in vertebrae without radiologically observed bone metastasis highlights that patients with metastatic spine disease could be at an increased risk of vertebral fractures even at levels where lesions have not been identified radiologically.

Walking Biomechanics and Spine Loading in Patients With Symptomatic Lumbar Spinal Stenosis.

Symptomatic lumbar spinal stenosis is a leading cause of pain and mobility limitation in older adults. It is clinically believed that patients with lumbar spinal stenosis adopt a flexed trunk posture or bend forward and alter their gait pattern to improve tolerance for walking. However, a biomechanical assessment of spine posture and motion during walking is broadly lacking in these patients. The purpose of this study was to evaluate lumbar spine and pelvic sagittal angles and lumbar spine compressive loads in standing and walking and to determine the effect of pain and neurogenic claudication symptoms in patients with symptomatic lumbar spinal stenosis. Seven participants with symptomatic lumbar spinal stenosis, aged 44-82, underwent a 3D opto-electronic motion analysis during standing and walking trials in asymptomatic and symptomatic states. Passive reflective marker clusters (four markers each) were attached to participants at T1, L1, and S2 levels of the spine, with additional reflective markers at other spinal levels, as well as the head, pelvis, and extremities. Whole-body motion data was collected during standing and walking trials in asymptomatic and symptomatic states. The results showed that the spine was slightly flexed during walking, but this was not affected by symptoms. Pelvic tilt was not different when symptoms were present, but suggests a possible effect of more forward tilt in both standing (p = 0.052) and walking (p = 0.075). Lumbar spine loading during symptomatic walking was increased by an average of 7% over asymptomatic walking (p = 0.001). Our results did not show increased spine flexion (adopting a trunk-flexed posture) and only indicate a trend for a small forward shift of the pelvis during both symptomatic walking and standing. This suggests that provocation of symptoms in these patients does not markedly affect their normal gait kinematics. The finding of increased spine loading with provocation of symptoms supports our hypothesis that spine loading plays a role in limiting walking function in patients with lumbar spinal stenosis, but additional work is needed to understand the biomechanical cause of this increase.

The Influence of Kinematic Constraints on Model Performance During Inverse Kinematics Analysis of the Thoracolumbar Spine.

Motion analysis is increasingly applied to spine musculoskeletal models using kinematic constraints to estimate individual intervertebral joint movements, which cannot be directly measured from the skin surface markers. Traditionally, kinematic constraints have allowed a single spinal degree of freedom (DOF) in each direction, and there has been little examination of how different kinematic constraints affect evaluations of spine motion. Thus, the objective of this study was to evaluate the performance of different kinematic constraints for inverse kinematics analysis. We collected motion analysis marker data in seven healthy participants (4F, 3M, aged 27-67) during flexion-extension, lateral bending, and axial rotation tasks. Inverse kinematics analyses were performed on subject-specific models with 17 thoracolumbar joints allowing 51 rotational DOF (51DOF) and corresponding models including seven sets of kinematic constraints that limited spine motion from 3 to 9DOF. Outcomes included: (1) root mean square (RMS) error of spine markers (measured vs. model); (2) lag-one autocorrelation coefficients to assess smoothness of angular motions; (3) maximum range of motion (ROM) of intervertebral joints in three directions of motion (FE, LB, AR) to assess whether they are physiologically reasonable; and (4) segmental spine angles in static ROM trials. We found that RMS error of spine markers was higher with constraints than without (p < 0.0001) but did not notably improve kinematic constraints above 6DOF. Compared to segmental angles calculated directly from spine markers, models with kinematic constraints had moderate to good intraclass correlation coefficients (ICCs) for flexion-extension and lateral bending, though weak to moderate ICCs for axial rotation. Adding more DOF to kinematic constraints did not improve performance in matching segmental angles. Kinematic constraints with 4-6DOF produced similar levels of smoothness across all tasks and generally improved smoothness compared to 9DOF or unconstrained (51DOF) models. Our results also revealed that the maximum joint ROMs predicted using 4-6DOF constraints were largely within physiologically acceptable ranges throughout the spine and in all directions of motions. We conclude that a kinematic constraint with 5DOF can produce smooth spine motions with physiologically reasonable joint ROMs and relatively low marker error.

Patterns of Load-to-Strength Ratios Along the Spine in a Population-Based Cohort to Evaluate the Contribution of Spinal Loading to Vertebral Fractures.

Vertebral fractures (VFx) are common among older adults. Epidemiological studies report high occurrence of VFx at mid-thoracic and thoracolumbar regions of the spine; however, reasons for this observation remain poorly understood. Prior reports of high ratios of spinal loading to vertebral strength in the thoracolumbar region suggest a possible biomechanical explanation. However, no studies have evaluated load-to-strength ratios (LSRs) throughout the spine for a large number of activities in a sizeable cohort. Thus, we performed a cross-sectional study in a sample of adult men and women from a population-based cohort to: 1) determine which activities cause the largest vertebral LSRs, and 2) examine patterns of LSRs along the spine for these high-load activities. We used subject-specific musculoskeletal models of the trunk to determine vertebral compressive loads for 109 activities in 250 individuals (aged 41 to 90 years, 50% women) from the Framingham Heart Study. Vertebral compressive strengths from T4 to L4 were calculated from computed tomography-based vertebral size and bone density measurements. We determined which activities caused maximum LSRs at each of these spinal levels. We identified nine activities that accounted for >95% of the maximum LSRs overall and at least 89.6% at each spinal level. The activity with the highest LSR varied by spinal level, and three distinct spinal regions could be identified by the activity producing maximum LSRs: lateral bending with a weight in one hand (upper thoracic), holding weights with elbows flexed (lower thoracic), and forward flexion with weight (lumbar). This study highlights the need to consider a range of lifting, holding, and non-symmetric activities when evaluating vertebral LSRs. Moreover, we identified key activities that produce higher loading in multiple regions of the spine. These results provide the first guidance on what activities to consider when evaluating vertebral load-to-strength ratios in future studies, including those examining dynamic motions and the biomechanics of VFx. © 2020 American Society for Bone and Mineral Research (ASBMR).

Validity of flexicurve and motion capture for measurements of thoracic kyphosis vs standing radiographic measurements.

Thoracic kyphosis varies among healthy adults and typically increases with age. Excessive kyphosis (hyperkyphosis) is associated with negative health. Spinal alignment also affects spine loading, with implications for conditions such as vertebral fractures and back pain. Valid measurements of kyphosis are necessary for clinical and research assessment of age-related posture changes, and to support improved biomechanical understating of spine conditions. Independent validation of non-radiographic techniques, however, remains limited. The goal of this study was to compare standing radiographic kyphosis measurements with non-radiographic measurements and predictions of thoracic kyphosis using flexicurve and motion analysis markers, in order to determine their validity. Thirteen non-radiographic measures of thoracic kyphosis were obtained in each of 40 adult subjects who also underwent standing radiographs of the thoracic spine. Measures included estimates derived by fitting of polynomials or circles to the non-radiographic data, as well as predictions calculated using previously published methods. Intra-class correlations (ICC) and root-mean square errors (RMSEs) were calculated between radiographic and non-radiographic measures to determine validity. Most non-radiographic estimates of kyphosis show similar, weak to moderate levels of validity when compared to radiographic measurements, and RMSEs ranging from 8.0° to 20.8°. Unbiased estimates of radiographic measurements with moderate to good ICCs were identified, however, based on marker measurements, and new prediction equations were created with similar validity that also account for age and body habitus. Clinical significance: These non-radiographic measurements of thoracic kyphosis can be applied to clinical practice or to clinical studies with recognition of specific limitations.

Spinal Compressive Forces in Adolescent Idiopathic Scoliosis With and Without Carrying Loads: A Musculoskeletal Modeling Study.

The pathomechanisms of curve progression in adolescent idiopathic scoliosis (AIS) remain poorly understood and biomechanical data are limited. A deeper insight into spinal loading could provide valuable information toward the improvement of current treatment strategies. This work therefore aimed at using subject-specific musculoskeletal full-body models of patients with AIS to predict segmental compressive forces around the curve apex and to investigate how these forces are affected by simulated load carrying. Models were created based on spatially calibrated biplanar radiographic images from 24 patients with mild to moderate AIS and validated by comparing predictions of paravertebral muscle activity with reported values from in vivo studies. Spinal compressive forces were predicted during unloaded upright standing as well as standing with external loads of 10, 15, and 20% of body weight (BW) applied to the scapulae to simulate carrying a backpack in the regular way on the back as well as in front of the body and over the shoulder on the concave and convex sides of the scoliotic curve. The predicted muscle activities around the curve apex were higher on the convex side for the erector spinae (ES) and multifidi (MF) muscles, which was comparable to the EMG-based in vivo measurements from the literature. In terms of spinal loading, the implementation of spinal deformity resulted in a 10% increase of compressive force at the curve apex during unloaded upright standing. Apical compressive forces further increased by 50-62% for a simulated 10% BW load and by 77-94% and 103-128% for 15% and 20% BW loads, respectively. Moreover, load-dependent compressive force increases were the lowest in the regular backpack and the highest in the frontpack and convex conditions, with concave side-carrying forces in between. The predictions indicated increased segmental compressive forces during unloaded upright standing, which could be ascribed to the scoliotic deformation. When carrying loads, compressive forces further increased depending on the carrying mode and the weight of the load. These results can be used as a basis for further studies investigating segmental loading in AIS patients during functional activities. Models can thereby be created using the same approach as proposed in this study.

Musculoskeletal full-body models including a detailed thoracolumbar spine for children and adolescents aged 6-18 years.

Currently available musculoskeletal inverse-dynamics thoracolumbar spine models are entirely based on data from adults and might therefore not be applicable for simulations in children and adolescents. In addition, these models lack lower extremities, which are required for comprehensive evaluations of functional activities or therapeutic exercises. We therefore created OpenSim-based musculoskeletal full-body models including a detailed thoracolumbar spine for children and adolescents aged 6-18 years and validated by comparing model predictions to in vivo data. After combining our recently developed adult thoracolumbar spine model with a lower extremity model, children and adolescent models were created for each year of age by adjusting segmental length and mass distribution, center of mass positions and moments of inertia of the major body segments as well as sagittal pelvis and spine alignment based on literature data. Similarly, muscle strength properties were adjusted based on CT-derived cross-sectional area measurements. Simulations were conducted from in vivo studies reported in the literature involving children and adolescents evaluating maximum trunk muscle strength (MTMS), lumbar disc compressibility (LDC), intradiscal pressure (IDP) and trunk muscle activity (MA). Model predictions correlated highly with in vivo data (MTMS: r ≥ 0.82, p ≤ 0.03; LDC: r = 0.77, p < 0.001; IDP: r ≥ 0.78, p < 0.001; MA: r ≥ 0.90, p < 0.001), indicating suitability for the reasonably accurate prediction of maximal trunk muscle strength, segmental loading and trunk muscle activity in children and adolescents. When aiming at investigating children or adolescents with pathologies such as idiopathic scoliosis, our models can serve as a basis for the creation of deformed spine models and for comparative purposes.

A Longitudinal Study of Trunk Muscle Properties and Severity of Thoracic Kyphosis in Women and Men: The Framingham Study.

BACKGROUND: Cross-sectional studies suggest that trunk muscle morphology in the lumbar spine is an important determinant of kyphosis severity in older adults. The contribution of age-related changes in muscle morphology in the thoracic and lumbar spine to progression of kyphosis is not known. Our objective was to determine cross-sectional and longitudinal associations of thoracic and lumbar muscle size and density with kyphosis. METHODS: Participants were 1,087 women and men (mean age: 61 years) of the Framingham Heart Study who underwent baseline and follow-up quantitative computed tomography (QCT) scanning 6 years apart. We used QCT scans to measure trunk muscle cross-sectional area (CSA, cm2) and density (HU) at the thoracic and lumbar spine and Cobb angle (degrees) from T4 to T12. Linear regression models estimated the association between muscle morphology and kyphosis. RESULTS: At baseline, smaller muscle CSA and lower density of thoracic (but not lumbar) spine muscles were associated with a larger (worse) Cobb angle in women and men. For example, each standard deviation decrease in baseline thoracic paraspinal muscle CSA was associated with a larger baseline Cobb angle in women (3.7 degrees, 95% CI: 2.9, 4.5) and men (2.5 degrees, 95% CI: 1.6, 3.3). Longitudinal analyses showed that loss of muscle CSA and density at the thoracic and lumbar spine was not associated with progression of kyphosis. CONCLUSIONS: Our findings suggest that kyphosis severity is related to smaller and lower density trunk muscles at the thoracic spine. Future studies are needed to determine how strengthening mid-back musculature alters muscle properties and contributes to preventing kyphosis progression.

Thoracic Kyphosis and Physical Function: The Framingham Study.

OBJECTIVE: To evaluate the association between thoracic kyphosis and physical function. DESIGN: Prospective cohort. SETTING: Framingham, Massachusetts. PARTICIPANTS: Framingham Heart Study Offspring and Third Generation cohort members who had computed tomography (CT) performed between 2002 and 2005 and physical function assessed a mean 3.4 years later (N = 1,100; mean age 61 ± 8, range 50-85). MEASUREMENTS: Thoracic kyphosis (Cobb angle, T4-T12) was measured in degrees using supine CT scout images. Participants were categorized according to Cobb angle to compare those in the highest quartile (Q4, most-severe kyphosis) with those in the lowest quartiles (Q1-Q3). Quick walking speed (m/s), chair-stand time (seconds), grip strength (kg), and self-reported impairments were assessed using standardized procedures. Analyses were adjusted for age, height, weight, smoking, follow-up time, vertebral fractures, and prevalent spinal degeneration. RESULTS: Thoracic kyphosis was not associated with physical function in women or men, and these results were consistent in those younger than 65 and those aged 65 and older. For example, walking speed was similar in adults younger than 65 with and without severe kyphosis (women, Q4: 1.38 m/s, Q1-Q3: 1.40 m/s, P = .69; men, Q4: 1.65 m/s, Q1-Q3: 1.60 m/s; P = .39). CONCLUSION: In healthy relatively high-functioning women and men, kyphosis severity was not associated with subsequent physical function. Individuals at risk of functional decline cannot be targeted based on supine CT thoracic curvature measures alone.

Incorporation of CT-based measurements of trunk anatomy into subject-specific musculoskeletal models of the spine influences vertebral loading predictions.

We created subject-specific musculoskeletal models of the thoracolumbar spine by incorporating spine curvature and muscle morphology measurements from computed tomography (CT) scans to determine the degree to which vertebral compressive and shear loading estimates are sensitive to variations in trunk anatomy. We measured spine curvature and trunk muscle morphology using spine CT scans of 125 men, and then created four different thoracolumbar spine models for each person: (i) height and weight adjusted (Ht/Wt models); (ii) height, weight, and spine curvature adjusted (+C models); (iii) height, weight, and muscle morphology adjusted (+M models); and (iv) height, weight, spine curvature, and muscle morphology adjusted (+CM models). We determined vertebral compressive and shear loading at three regions of the spine (T8, T12, and L3) for four different activities. Vertebral compressive loads predicted by the subject-specific CT-based musculoskeletal models were between 54% lower to 45% higher from those estimated using musculoskeletal models adjusted only for subject height and weight. The impact of subject-specific information on vertebral loading estimates varied with the activity and spinal region. Vertebral loading estimates were more sensitive to incorporation of subject-specific spinal curvature than subject-specific muscle morphology. Our results indicate that individual variations in spine curvature and trunk muscle morphology can have a major impact on estimated vertebral compressive and shear loads, and thus should be accounted for when estimating subject-specific vertebral loading. © 2017 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 35:2164-2173, 2017.

Evaluation of a new approach to compute intervertebral disc height measurements from lateral radiographic views of the spine.

PURPOSE: Current standard methods to quantify disc height, namely distortion compensated Roentgen analysis (DCRA), have been mostly utilized in the lumbar and cervical spine and have strict exclusion criteria. Specifically, discs adjacent to a vertebral fracture are excluded from measurement, thus limiting the use of DCRA in studies that include older populations with a high prevalence of vertebral fractures. Thus, we developed and tested a modified DCRA algorithm that does not depend on vertebral shape. METHODS: Participants included 1186 men and women from the Framingham Heart Study Offspring and Third Generation Multidetector CT Study. Lateral CT scout images were used to place 6 morphometry points around each vertebra at 13 vertebral levels in each participant. Disc heights were calculated utilizing these morphometry points using DCRA methodology and our modified version of DCRA, which requires information from fewer morphometry points than the standard DCRA. RESULTS: Modified DCRA and standard DCRA measures of disc height are highly correlated, with concordance correlation coefficients above 0.999. Both measures demonstrate good inter- and intra-operator reproducibility. 13.9 % of available disc heights were not evaluable or excluded using the standard DCRA algorithm, while only 3.3 % of disc heights were not evaluable using our modified DCRA algorithm. CONCLUSIONS: Using our modified DCRA algorithm, it is not necessary to exclude vertebrae with fracture or other deformity from disc height measurements as in the standard DCRA. Modified DCRA also yields identical measurements to the standard DCRA. Thus, the use of modified DCRA for quantitative assessment of disc height will lead to less missing data without any loss of accuracy, making it a preferred alternative to the current standard methodology.

Heritability of Thoracic Spine Curvature and Genetic Correlations With Other Spine Traits: The Framingham Study.

Hyperkyphosis is a common spinal disorder in older adults, characterized by excessive forward curvature of the thoracic spine and adverse health outcomes. The etiology of hyperkyphosis has not been firmly established, but may be related to changes that occur with aging in the vertebrae, discs, joints, and muscles, which function as a unit to support the spine. Determining the contribution of genetics to thoracic spine curvature and the degree of genetic sharing among co-occurring measures of spine health may provide insight into the etiology of hyperkyphosis. The purpose of our study was to estimate heritability of thoracic spine curvature using T4 -T12 kyphosis (Cobb) angle and genetic correlations between thoracic spine curvature and vertebral fracture, intervertebral disc height narrowing, facet joint osteoarthritis (OA), lumbar spine volumetric bone mineral density (vBMD), and paraspinal muscle area and density, which were all assessed from computed tomography (CT) images. Participants included 2063 women and men in the second and third generation offspring of the original cohort of the Framingham Study. Heritability of kyphosis angle, adjusted for age, sex, and weight, was 54% (95% confidence interval [CI], 43% to 64%). We found moderate genetic correlations between kyphosis angle and paraspinal muscle area (ρˆG , -0.46; 95% CI, -0.67 to -0.26), vertebral fracture (ρˆG , 0.39; 95% CI, 0.18 to 0.61), vBMD (ρˆG , -0.23; 95% CI, -0.41 to -0.04), and paraspinal muscle density (ρˆG , -0.22; 95% CI, -0.48 to 0.03). Genetic correlations between kyphosis angle and disc height narrowing (ρˆG , 0.17; 95% CI, -0.05 to 0.38) and facet joint OA (ρˆG , 0.05; 95% CI, -0.15 to 0.24) were low. Thoracic spine curvature may be heritable and share genetic factors with other age-related spine traits including trunk muscle size, vertebral fracture, and bone mineral density. © 2016 American Society for Bone and Mineral Research.

Associations of Computed Tomography-Based Trunk Muscle Size and Density With Balance and Falls in Older Adults.

BACKGROUND: Deficits in balance and muscle function are important risk factors for falls in older adults. Aging is associated with significant declines in muscle size and density, but associations of trunk muscle size and density with balance and falls in older adults have not been previously examined. METHODS: Trunk muscle size (cross-sectional area) and attenuation (a measure of tissue density) were measured in computed tomography scans (at the L2 lumbar level) in a cohort of older adults (mean ± SD age of 81.9±6.4) residing in independent living communities. Outcome measures were postural sway measured during quiet standing and Short Physical Performance Battery (SPPB) at baseline, and falls reported by participants for up to 3 years after baseline measurements. RESULTS: Higher muscle density was associated with reduced postural sway, particularly sway velocities, in both men and women, and better Short Physical Performance Battery score in women, but was not associated with falls. Larger muscle size was associated with increased postural sway in men and women and with increased likelihood of falling in men. CONCLUSIONS: The results suggest that balance depends more on muscle quality than on the size of the muscle. The unexpected finding that larger muscle size was associated with increased postural sway and increased fall risk requires further investigation, but highlights the importance of factors besides muscle size in muscle function in older adults.