Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
Electrophoresis ; 38(11): 1441-1449, 2017 06.
Article in English | MEDLINE | ID: mdl-28112416

ABSTRACT

Two dielectrophoresis systems are introduced where the induced dielectrophoretic force is constant throughout the experimental region, resulting in uniform (isomotive) microparticle translation. Isomotive dielectrophoresis (isoDEP) is accomplished through a unique geometry where the gradient of the field-squared (∇Erms2) is constant, a characteristic that is otherwise highly nonuniform in traditional DEP platforms. The governing isoDEP equations were derived herein and applied to two different isoDEP prototypes: (i) one fabricated from deep reactive ion etching (DRIE) of a conductive silicon wafer (1-10 Ω-cm) whose patterned features served as electrodes and microchannel sidewalls simultaneously; (ii) a second where the electric field is applied lengthwise through a PDMS microchannel whose geometry follows a specific curvature. Both positive and negative dielectrophoresis was demonstrated with the isoDEP devices using silver-coated hollow glass spheres and polystyrene particles, respectively. Particle tracking was used to compare particle trajectory with the expected dielectrophoretic response; further, particle velocity was used to measure the Clausius-Mossotti factor of individual polystyrene particles (18-24.9 µm) in both devices with a value of -0.40 ± 0.063 (n = 110) and -0.48 ± 0.055 (n = 18) for the DRIE and PDMS isoDEP platforms, respectively. The isoDEP platform is capable of analyzing multiple particles simultaneously, providing greater throughput than traditional electrorotation platforms.


Subject(s)
Computer Simulation , Electrophoresis, Microchip , Equipment Design , Electroosmosis , Electrophoresis, Microchip/instrumentation , Electrophoresis, Microchip/methods , Equipment Design/instrumentation , Equipment Design/methods , Microelectrodes , Models, Theoretical , Particle Size , Polystyrenes
2.
Environ Sci Technol ; 44(7): 2735-9, 2010 Apr 01.
Article in English | MEDLINE | ID: mdl-20199068

ABSTRACT

Mineral carbonation is a potentially attractive alternative to storage of compressed CO(2) in underground repositories, known as geosequestration. Processes for the conversion of basic ores, such as magnesium silicates, to carbonates have been proposed by various researchers, with storage of the carbonate as backfill in the original mine representing a solid carbon sink. The stability of such carbon sinks against acid rain and other sources of strong acids is examined here. It is acknowledged that in the presence of strong acid, carbonates will dissolve and release carbon dioxide. A sensitivity analysis covering annual average rainfall and pH that may be encountered in industrialized areas of the United States, China, Europe, and Australia was conducted to determine maximum CO(2) rerelease rates from mineral carbonation carbon sinks. This analysis is based on a worst-case premise that is equivalent to assuming infinitely rapid kinetics of dissolution of the carbonate. The analysis shows that under any likely conditions of pH and rainfall, leakage rates of stored CO(2) are negligible. This is illustrated in a hypothetical case study under Australian conditions. It is thus proposed that sequestration by mineral carbonation can be considered to be permanent on practical human time scales. Other possible sources of acid have also been considered.


Subject(s)
Acid Rain/analysis , Carbon Dioxide/isolation & purification , Carbonates/chemistry , Minerals/chemistry , Australia , Magnesium/chemistry , Silicic Acid/chemistry , Water/chemistry
SELECTION OF CITATIONS
SEARCH DETAIL
...