ABSTRACT
A new direct gas chromatography procedure (headspace solid phase microextraction) was developed for the quantitative determination of methanol in biodiesel. The analysis was performed by exposing a carboxen-polydimethylsiloxane SPME fiber assembly to the headspace of the biodiesel sample. The gas chromatography used a HP-5 capillary column and flame ionization detection. A polynomial relationship was observed between the methanol concentration and its peak area. This method showed good reproducibility (average relative standard deviation 7.06%) and recovery (average recovery 100.2%).
Subject(s)
Gasoline/analysis , Methanol/analysis , Solid Phase Microextraction/methods , Alcohols/analysis , Calibration , Capillary Action , Chromatography, Gas/methods , Gas Chromatography-Mass Spectrometry , Methanol/isolation & purificationABSTRACT
A laboratory system has been designed, constructed, and validated that reduces the complexity, time required, and data variability associated with catalytic microreactors that require post reaction steps prior to product analysis. In this work, a Varian (Walnut Creek, CA, USA) 3600 GC (gas chromatography) system coupled with a Saturn quadrupole ion trap mass spectrometer was used to perform mass spectral analysis in real-time catalytic cracking reactions. As this was an integrated reactor/analyzer, the GC column was exposed to temperatures beyond the degradation point of the column, and so selective ion storage RF waveform was used to remove the siloxane masses from the spectra. This produced lower detection limits and full scan data for identification. Mass/charge segmentation of the mass spectrometer allowed the complete product identification for electron impact spectra. Hexane was reacted over H-ZSM-5 catalyst for instrument validation. This produced a series of alkanes, alkenes, and aromatics with distributions consistent with that reported for the cracking of hexane.
Subject(s)
Gas Chromatography-Mass Spectrometry/methods , Mass Spectrometry/instrumentation , Online Systems , Spectrometry, Mass, Electrospray Ionization/methods , Tandem Mass Spectrometry/methods , Catalysis , Clinical Laboratory Techniques , Hexanes/chemistry , Mass Spectrometry/methods , Reproducibility of Results , Sensitivity and SpecificityABSTRACT
In this study, zero-valent metal dehalogenation of mirex was conducted with amine solvents at high temperatures. Mirex was treated with excess amine in sealed glass tube reactors under nitrogen. The amines used were n-butyl amine (l), ethyl amine (l), dimethyl amine (g), diethyl amine (l), triethyl amine (l), trimethyl amine (g) and ammonia (g). The metals used were copper, zinc, magnesium, aluminum and calcium. The most suitable amine solvent and metal were selected by running a series of reactions with different amines and different zero-valent metals, in order to optimize the conditions under which complete degradation of mirex takes place. These dehalogenation reactions illustrated the role of zero-valent metals as reductants, whereas the amine solvents acted as proton donors. In this study, we report that mirex was completely degraded with diethyl amine (l) in the presence of copper at 100 degrees C and the hydrogenated products accounted for more than 94 of the degraded mirex.