Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 13 de 13
Filter
Add more filters










Publication year range
1.
Front Chem ; 12: 1400881, 2024.
Article in English | MEDLINE | ID: mdl-38831914

ABSTRACT

The integumentary system, a vital organ, constitutes a multifaceted barrier against pathogens and environmental factors, crucial for maintaining homeostasis. Intrinsic and extrinsic factors can accelerate skin aging and compromise its homeostatic functions and solar rays, particularly ultraviolet (UV) radiation, pose a significant risk for skin cancer. Polyphenols are molecules that donate hydrogen or electrons, preventing the oxidation of substances, such as lipids, or the formation of inflammatory mediators by cyclooxygenase enzymes. This study explored the in vitro safety, by HET-CAM (hen's egg test on chorioallantoic membrane), and protective effects of polyphenols (chlorogenic acid, apigenin, kaempferol, and naringenin) against stratum corneum UV-induced lipid peroxidation using an innovative method, the HPLC-TBARS-EVSC (high-performance liquid chromatography-thiobarbituric acid reactive substances-ex vivo stratum corneum), and a stress test using methyl nicotinate and laser Doppler flowmetry to establish in vivo the samples' topical anti-inflammatory ability. An aqueous gel containing 0.1% w/w of each polyphenol was formulated using ammonium acryloyldimethyltaurate/VP copolymer. Through the utilization of the HET-CAM assay for in vitro safety assessment, chlorogenic acid, apigenin, kaempferol, and naringenin were classified as non-irritating active ingredients. This classification was based on their lack of adverse reactions within the vascularization of the chorioallantoic membrane. To assess the protective capabilities of four polyphenols against lipid peroxidation in the stratum corneum, the HPLC-TBARS-EVSC protocol was conducted. It was observed that only naringenin exhibited a significant reduction in epidermal lipoperoxidation, indicating superior anti-radical potential. Conversely, chlorogenic acid, apigenin, and kaempferol displayed a pro-oxidant profile under the specified test conditions. The laser Doppler flowmetry suggested the anti-inflammatory potential of naringenin, kaempferol, and chlorogenic acid, with naringenin showing superior efficacy involving all parameters quantified. Naringenin emerged as the only polyphenol capable of reducing the intensity of the inflammatory response induced by methyl nicotinate solution in the participants, compared to the blank gel and the untreated area. This comprehensive investigation underscores the diverse protective roles of polyphenols in skin health, emphasizing naringenin's notable anti-radical and anti-inflammatory properties.

2.
Mar Drugs ; 20(8)2022 Jul 27.
Article in English | MEDLINE | ID: mdl-36005483

ABSTRACT

The current mindset in the cosmetics market about sustainable ingredients had increased the search for new sources of natural active ingredients. Cyanobacteria are a great source of functional ingredients for cosmetics, as a producer of pigments with described bioactive potential (carotenoids and phycobiliproteins). This work aimed to evaluate the cosmetic potential of marine cyanobacterium Cyanobium sp. pigment-targeted extracts (carotenoids and phycobiliproteins), evaluating their in vitro safety through cytotoxicity assays, cosmetic-related enzyme inhibition, ingredient stability, and putative product (serum formulation). Results showed no cytotoxicity from the extracts in skin-related cell lines. Carotenoid extract showed anti-hyaluronidase capacity (IC50 = 108.74 ± 5.74 mg mL-1) and phycobiliprotein extract showed anti-hyaluronidase and anti-collagenase capacity (IC50 = 67.25 ± 1.18 and 582.82 ± 56.99 mg mL-1, respectively). Regarding ingredient and serum stability, both ingredients showed higher stability at low-temperature conditions, and it was possible to maintain the pigment content and bioactive capacity stable during the tested period, although in higher temperatures the product was degraded in a week. As a major conclusion, both extracts can be potential natural and sustainable ingredients for cosmetic uses, with relatively simple formulation and storage, and can be promising natural anti-aging ingredients due to their bioactive capacity.


Subject(s)
Cosmetics , Cyanobacteria , Carotenoids/pharmacology , Phycobiliproteins , Plant Extracts
3.
Heliyon ; 8(5): e09455, 2022 May.
Article in English | MEDLINE | ID: mdl-35637671

ABSTRACT

There is an increasingly growing demand for the use of natural and sustainable bioactives in the field of the pharmaceutical and cosmetic industries. The biomass from black soldier fly larvae (Hermetia illucens) can be viewed as an innovative source of compounds with high aggregate value and marketing potential due to the sustainable organic matter bioconversion process used as substrate for its development. This insect can be a source of lipid compounds with high added value, mainly due to its high content in fatty acids (FA) with potential applicability in the pharmaceutical and cosmetic industry. In this context, in this work different extraction methods were tested (decoction, microwaves, maceration and ultrasound), using water, acetone, n-hexane as extraction solvents, to evaluate yields of the BSF larvae lipid extracts, as well as their lipid profile, and a preliminary safety screening was conducted. Results show that despite using different extraction techniques and solvents, similar FA composition profiles were obtained. The lauric acid content (C12: 0) is elevated in all the extracts in relation to the other FA, ranging 37%-62%. The contents in palmitic (C16: 0) and oleic (C18: 1n-9) acids, were also high in all applied extraction methods. The omega-6 FA (ω-6 PUFAs), mainly linoleic acid (C18: 2n6c), were also identified in the lipid fraction of BSF larvae biomass, with a content variation between 4.5% and 17.7%, while the omega-3 group, namely α-Linolenic acid (C18: 3n3), presented values between 0.66% and 1.95%. None of the extracts presented toxicity in preliminary tests with the Artemia salina model. Through this study, it was possible to confirm that BSF larvae oil can be obtained by sustainable methods, containing a broad mixture of FA and being highly rich in lauric acid, with a promising skin care applicability.

4.
Nanomaterials (Basel) ; 12(2)2022 Jan 15.
Article in English | MEDLINE | ID: mdl-35055292

ABSTRACT

The human epidermis has a characteristic lipidic composition in the stratum corneum, where ceramides play a crucial role in the skin barrier homeostasis and in water-holding capacity. Several skin diseases, such as atopic dermatitis and psoriasis, exhibit a dysfunction in the lipid barrier with altered ceramide levels and increased loss of transepidermal water. Glucocorticoids are normally employed in the therapeutical management of these pathologies. However, they have shown a poor safety profile and reduced treatment efficiency. The main objective of this review is to, within the framework of the limitations of the currently available therapeutical approaches, establish the relevance of nanocarriers as a safe and efficient delivery strategy for glucocorticoids and ceramides in the topical treatment of skin disorders with barrier impairment.

5.
Biomolecules ; 10(7)2020 06 29.
Article in English | MEDLINE | ID: mdl-32610700

ABSTRACT

Due to the sustainable organic matter bioconversion process used as substrate for its development, the Hermetia illucens (Linnaeus) larvae biomass is considered a source of compounds with high aggregate value and quite a promising market. The materials that can be extracted from H. illucens larvae have opened the door to a diverse new field of ingredients, mainly for the feed and food industry, but also with potential applicability in cosmetics. In this review we succinctly describe the larval development and rearing cycle, the main compounds identified from different types of extractions, their bioactivities and focus on possible applications in cosmetic products. A search was made in the databases PubMed, ScienceDirect and Web of Science with the terms 'Hermetia illucens', 'bioactives', 'biochemical composition' and 'cosmetics ingredients', which included 71 articles published since 1994.


Subject(s)
Biological Factors/pharmacology , Cosmetics/pharmacology , Diptera/growth & development , Animals , Biomass , Diptera/metabolism , Larva/growth & development , Larva/metabolism , Life Cycle Stages
6.
Braz. arch. biol. technol ; 63: e20190204, 2020. tab, graf
Article in English | LILACS | ID: biblio-1132263

ABSTRACT

Abstract Microalgae are potential sources of a wide range of bioproducts. It is essential to choose the proper microalgae strain and culture condition to achieve an efficient production. The production yield of carotenoids by Dunaliella salina under the stress-induced culture conditions of nitrogen deprivation and excessive light intensity was evaluated. Also, a survey at laboratorial scale of the growth kinetics under different culture conditions of photoperiod, aeration, and agitation was performed for the seven species of green microalgae Ankistrodesmus fusiformis, Chlamydocapsa bacillus, Desmodesmus brasiliensis, Kirchneriella lunaris, Pseudokirchneriella subcapitata, and Scenedesmus obliquus. As a result, aeration of atmospheric air is enough to improve the growth kinetics of the seven species studied. Production of carotenoids was enhanced under stress by excessive light intensity. Although D. salina does not grow effectively under nitrogen deprivation, this stress condition may be used to quickly stimulate carotenoid production once the culture reaches a high cellular population.


Subject(s)
Carotenoids/biosynthesis , Chlorophyceae/growth & development , Chlorophyceae/chemistry , Stress, Physiological , Biotechnology , Kinetics , Biomass
7.
Braz. dent. j ; 27(3): 309-312, May-June 2016. tab, graf
Article in English | LILACS | ID: lil-782826

ABSTRACT

Abstract Dental sealants are important for prevention of carious lesions, if they have good shear strength. The aim of this study was to evaluate the shear bond strength (SBS) of two sealants to saliva-contaminated and non-contaminated enamel with and without an intermediate adhesive layer underneath the sealant. Ninety flat enamel surfaces from human third molars were randomly assigned to 6 groups (n=15): F (control): Fluroshield(tm) sealant; EWB (control): Embrace(tm) WetBond(tm); SB/F: Single Bond adhesive system + F; SB/EWB, s-SB/F and s-SB/EWB. In the s-SB/F and s-SB/EWB groups, the acid-etched enamel was contaminated with 0.01 mL of fresh human saliva for 20 s. Sealant cylinders were bonded to enamel surface with and without an intermediate adhesive system layer. The shear tests were performed using a universal testing machine (0.5 mm/min). Data were analyzed statistically by Kruskal-Wallis and Mann-Whitney tests (α=0.05). F presented higher mean SBS than EWB in all experimental conditions. The lowest SBS mean was obtained for EWB on contaminated enamel (p<0.05). In conclusion, an adhesive system layer should be used prior to sealant placement, in both dry and saliva-contaminated enamel. F had the best performance in all experimental conditions. EWB sealant showed very low results, but an adhesive layer underneath the sealant increased its SBS even after salivary contamination.


Resumo Selantes dentários são importantes para a prevenção de lesões de cárie desde que tenham boa resistência ao cisalhamento. O objetivo deste trabalho foi avaliar a resistência ao cisalhamento (SBS), de dois selantes em esmalte contaminado e não contaminado com saliva, com e sem uma camada adesiva intermediária sob o selante. Noventa superfícies de esmalte de terceiros molares humanos foram planificadas e divididas aleatoriamente em 6 grupos (n=15): F (controle): selante Fluroshield(tm); EWB (controle): Embrace(tm) WetBond(tm); SB/F: sistema adesivo Single Bond + F; SB/EWB, s-SB/F and s-SB/EWB. Nos grupos s-SB/F e s-SB/EWB, a contaminação do esmalte condicionado foi obtida com 0,01 mL de saliva humana fresca durante 20 s. Cilindros de selante foram colocados sobre a superfície do esmalte com e sem uma camada de sistema adesivo intermediária. Os ensaios de cisalhamento foram realizados utilizando uma máquina universal de ensaios (0,5 mm/min). Os dados foram analisados estatisticamente pelo teste de Kruskal-Wallis e Mann-Whitney (?#61537;=0,05). F apresentou valores médios de SBS maiores do que EWB em todas as condições experimentais. O menor valor médio de SBS foi obtido pelo EWB em esmalte contaminado (p<0,05). Em conclusão, uma camada de sistema de adesivo deve ser utilizada antes da colocação do selante, tanto em superfície seca quanto contaminada por saliva. F teve o melhor desempenho em todas as condições experimentais. O selante EWB apresentou resultados insatisfatórios, porém o uso de uma camada adesiva abaixo do selante aumentou sua SBS, mesmo após a contaminação salivar.


Subject(s)
Humans , Dental Bonding , Pit and Fissure Sealants , Saliva/chemistry , Benzhydryl Compounds , Phenols
8.
Braz Dent J ; 27(3): 309-12, 2016.
Article in English | MEDLINE | ID: mdl-27224565

ABSTRACT

Dental sealants are important for prevention of carious lesions, if they have good shear strength. The aim of this study was to evaluate the shear bond strength (SBS) of two sealants to saliva-contaminated and non-contaminated enamel with and without an intermediate adhesive layer underneath the sealant. Ninety flat enamel surfaces from human third molars were randomly assigned to 6 groups (n=15): F (control): Fluroshield(tm) sealant; EWB (control): Embrace(tm) WetBond(tm); SB/F: Single Bond adhesive system + F; SB/EWB, s-SB/F and s-SB/EWB. In the s-SB/F and s-SB/EWB groups, the acid-etched enamel was contaminated with 0.01 mL of fresh human saliva for 20 s. Sealant cylinders were bonded to enamel surface with and without an intermediate adhesive system layer. The shear tests were performed using a universal testing machine (0.5 mm/min). Data were analyzed statistically by Kruskal-Wallis and Mann-Whitney tests (α=0.05). F presented higher mean SBS than EWB in all experimental conditions. The lowest SBS mean was obtained for EWB on contaminated enamel (p<0.05). In conclusion, an adhesive system layer should be used prior to sealant placement, in both dry and saliva-contaminated enamel. F had the best performance in all experimental conditions. EWB sealant showed very low results, but an adhesive layer underneath the sealant increased its SBS even after salivary contamination.


Subject(s)
Dental Bonding , Pit and Fissure Sealants , Saliva/chemistry , Benzhydryl Compounds , Humans , Phenols
9.
Lasers Med Sci ; 30(4): 1183-7, 2015 May.
Article in English | MEDLINE | ID: mdl-24532087

ABSTRACT

The objective of this study was to use Fourier Transform Infrared (FTIR) spectroscopy and Scanning Electron Microscopy (SEM) to assess whether Nd:YAG laser irradiation associated with a dye or not alters the chemical constitution of the enamel. Fourteen enamel sections were randomly divided into two groups: (1) Nd:YAG and (2) dye + Nd:YAG. First, the untreated enamel surfaces were analyzed by FTIR to acquire the control absorption spectrum. Next, Group 2 received a layer of inactivated coal diluted in deionized water before laser treatment. Enamel samples belonging to groups 1 and 2 were then irradiated with a 1,064-nm Nd:YAG laser (80 mJ, 10 Hz) in the contact mode; the carbonate absorption band and the water absorption band were measured in each sample after irradiation. The water band was measured again 24 h, 48 h, and 7 days after irradiation. Group 1 had statistically similar water and carbonate contents before and after irradiation. Group 2 displayed significantly lower (p < 0.05) water content after irradiation, which remained constant along time at 24 and 48 h. After 7 days, the water content increased slightly, being statistically higher than in the other experimental periods, except for the control. The carbonate/phosphate ratio was measured only at the beginning, and after irradiation, it decreased only in Group 2 indicating carbonate loss (p < 0.05). Irradiation with 1,064-nm Nd:YAG laser associated with a dye reduces the carbonate and structural water content in the enamel.


Subject(s)
Carbonates/chemistry , Dental Enamel/chemistry , Lasers, Solid-State , Water/chemistry , Dental Caries/prevention & control , Dental Enamel/radiation effects , Humans , Microscopy, Electron, Scanning , Spectroscopy, Fourier Transform Infrared , Surface Properties
10.
J Biomed Opt ; 18(10): 108003, 2013 Oct.
Article in English | MEDLINE | ID: mdl-24145663

ABSTRACT

This study aimed to assess how the wear that brushing promotes affects CO2 laser-irradiated enamel microhardness after cariogenic challenge in vitro. Forty fragments measuring 4 × 4 mm were randomly assigned to four groups according to the enamel surface treatment: G1-control, G2-CO2-laser irradiation, G3-brushing, and G4-CO2 laser irradiation + brushing. A laser device emitting at 10.6 µm was used (power=0.5 W, energy per pulse=0.05 mJ, and frequency=10 kHz). Specimens belonging to groups G3 and G4 were brushed (80,000 strokes) with a brushing simulator using toothpaste. Next, the samples were challenged with acid: the specimens were immersed in demineralizing and remineralizing solutions for 8 days. The acid resistance of enamel was evaluated by cross-sectional microhardness tests. The area under the curve (KHN × µm) was calculated. Analysis of variance (ANOVA) one-away and Fisher's test were performed for the statistical analysis (p<0.05). Group G2 specimens (31,185 ± 4706) were statistically different from specimens belonging to groups G1 (26,723 ± 2446), G3 (28,194 ± 1376), and G4 (28,207 ± 2234), which were statistically similar. The brushing time used in the present study probably wore the CO2-lased enamel, so demineralization could not be prevented in the brushed group.


Subject(s)
Dental Enamel/chemistry , Lasers, Gas , Analysis of Variance , Dental Caries/prevention & control , Dental Enamel/drug effects , Dental Enamel/radiation effects , Hardness , Humans , Hydrogen-Ion Concentration , Molar , Potassium Chloride/pharmacology , Random Allocation , Toothbrushing
11.
Arch Oral Biol ; 57(9): 1153-8, 2012 Sep.
Article in English | MEDLINE | ID: mdl-22385837

ABSTRACT

OBJECTIVES: Considering the enamel chemical structure, especially carbonate band, which has a major role in the caries prevention, the objective of the present study was to assess the chemical alterations on the enamel irradiated with CO(2) laser by means of FTIR spectroscopy and SEM analysis. DESIGN: The enamel surfaces were analysed on a spectrometer for acquisition of the absorption spectrum relative to the chemical composition of the control sample. The irradiation was conducted with a 10.6-µm CO(2) laser (0.55W, 660W/cm(2)). The carbonate absorption band at 1600-1291cm(-1) as well as the water absorption band at 3793-2652cm(-1) was measured in each sample after the irradiation. The water band was measured again 24-h after the irradiation. The band area of each chemical compound was delimited, the background was subtracted, and the area under each band was integrated. Each area was normalized by the phosphate band (1190-702cm(-1)). RESULTS: There was a statistically significant decrease (p<0.05) in the water content after irradiation (control: 0.184±0.04; irradiated: 0.078±0.026), which increased again after rehydration (0.145±0.038). The carbonate/phosphate ratio was measured initially (0.112±0.029) and its reduction after irradiation indicated the carbonate loss (0.088±0.014) (p<0.05). CONCLUSION: The 10.6-µm CO(2) laser irradiation diminishes the carbonate and water contents in the enamel after irradiation.


Subject(s)
Dental Enamel/radiation effects , Lasers, Gas , Body Water/chemistry , Carbonates/analysis , Dental Enamel/chemistry , Dental Enamel/ultrastructure , Humans , Microscopy, Electron, Scanning , Molar, Third , Phosphates/analysis , Radiation Dosage , Spectroscopy, Fourier Transform Infrared , Time Factors , Tooth Crown/chemistry , Tooth Crown/radiation effects , Tooth Crown/ultrastructure
12.
ROBRAC ; 17(43): 13-21, jun. 2008. ilus
Article in Portuguese | LILACS-Express | LILACS | ID: lil-525097

ABSTRACT

Sabe-se que os localizadores apicais eletrônicos fundamentam-se na emissão de correntes de freqüênciaem KHz que promovem sua localização apical baseada em quociente resultante ou subtração dessas.Frente a reabsorções radiculares apicais, pode haver alteração na leitura dessas medidas, levando aocomprometimento de seus resultados. Portanto, o objetivo desse trabalho foi avaliar a interferência sofridapor esses aparelhos quando utilizados em situações simuladas de reabsorções apicais na obtenção dasmedidas de odontometria. Para a realização desse estudo in vitro, foram utilizados 40 dentes unirradicularesextraídos (caninos inferiores) com o mesmo padrão de volume na região apical, utilizando-se apenas asua porção radicular. Inicialmente, cada dente, teve seu comprimento determinado visualmente, com umalima tipo k no 10 até o aparecimento desta no forame apical, de onde se recuou 1mm, definindo a medidado comprimento de trabalho (CT). A medida foi tomada novamente com a utilização do aparelho localizadorRoot ZX para o CT. Logo após, foi preparado um desgaste lateral padronizado na região apical a 4mm doápice. A medida foi tomada novamente com o aparelho, e as mesmas foram registradas e avaliadas estatisticamente.Os resultados mostraram que o Root ZX foi preciso em até 100% dos casos quando consideradasvariações de 1mm aquém, e até 0,5mm além da medida pré-determinada para o CT. Por meio desta comparação,constatou-se que o localizador apical foi eficaz, mostrando-se um método confiável. Entretanto, nãofoi detectada nenhuma variação significativa quando da presença de reabsorções radiculares simuladas.


Electronic apex locators work by emitting currents with frequencies measured in kHz that make itpossible to locate the apex on the basis of resultant quotients or subtraction of them. In cases of root apexresorption, these electrical measurements may undergo changes that compromise their results. Therefore,the aim of this study was to evaluate the interference effects that these devices are subject to, when usedin simulated situations of apex resorption to obtain tooth measurements. To carry out this in vitro study, 40single-root extracted teeth (lower canines), with the same volume pattern in the apex region, were used.Only the root portions were used. Firstly, the length of each tooth was determined visually, using a k-typeno. 10 file, until the apical foramen appeared. By stepping back 1 mm from this position, the measurementof working length (WL) was defined. The WL was then measured again using the Root ZX locating device.Following this, a standardized lateral worn area was prepared in the apical region, 4 mm from the apex. Themeasurement was made again using the device, and these data were recorded and statistically evaluated.The results showed that Root ZX was accurate in up to 100% of the cases when taking into considerationvariations from 1 mm less than to 0.5 mm more than the predetermined WL measurement. Through thiscomparison, it was observed that the apex locator was effective and was thus a reliable method. However,no significant variation was detected regarding the presence of simulated root resorption.

13.
Nursing (Ed. bras., Impr.) ; 4(34): 22-5, mar. 2001. ilus, tab
Article in Portuguese | LILACS, BDENF - Nursing | ID: lil-282900

ABSTRACT

O processo de envelhecimento produz modificaçöes biopsicossociais variáveis, de indivíduo para indivíduo, que repercurtem significativamente no cotidiano da pessoa idosa, por favorecer a perda da sua autonomia e independência. Entre essas alteraçöes destacam-se os problemas cognitivos, principalmente quando o geronte convive em ambiente com poucas relaçöes sociais. Dessa forma, este estudo exploratório compreendeu 39 idosos e foi realizado numa instituiçäo filantrópica, tipo asilar, na cidade de Joäo Pessoa - PB, com o objetivo de identificar a presença do diagnóstico de enfermagem "Processo de Pensamento Alterado" nesses indivíduos...


Subject(s)
Humans , Aged , Thinking , Aging , Homes for the Aged
SELECTION OF CITATIONS
SEARCH DETAIL
...