Green Synthesis and Characteristics of Cellulose Nanocrystal/Poly Acrylic Acid Nanocomposite Thin Film for Organic Dye Adsorption during Water Treatment.

Nanocellulose shows potential as an effective natural adsorbent for removing harmful contaminants from wastewater. This paper describes the development of innovative nanocellulose thin films made of cellulose nanocrystals (CNCs), polyacrylic acid (PAA), and active carbon (AC) as adsorbent materials for absorbing azo dyes from wastewater. The CNCs were recovered from sugarcane bagasse using alkali treatment and acid hydrolysis. The composition and processing parameters of the thin films were optimized, and their adsorption capacity was determined using thermodynamic isotherms and adsorption kinetics. Adsorption characteristics such as the methylene blue (MB) dye concentration, contact time, temperature, and pH were investigated to determine how they affected adsorption. The results show that the adsorption process follows pseudo-second-order kinetics. At an adsorbent mass of 50 mg, dye concentration of 50 ppm in 50 mL, and contact period of 120 min at 25 °C, the thin film comprising 64 wt% CNC, 16 wt% PAA, and 20 wt% AC showed high dye removal efficiency (86.3%) and adsorption capacity (43.15 mg/g). The MB removal efficiency increased to 95.56% and the adsorption capacity to 47.78 mg/g when the medium's pH was gradually increased from neutral to alkaline. The nontoxicity, low production cost, water stability, easy recovery, and high adsorption capacity of these membranes make them suitable for water treatment systems.

Microemulsified Gel Formulations for Topical Delivery of Clotrimazole: Structural and In Vitro Evaluation.

Microemulsified gels (µEGs) with fascinating functions have become indispensable as topical drug delivery systems due to their structural flexibility, high stability, and facile manufacturing process. Topical administration is an attractive alternative to traditional methods because of advantages such as noninvasive administration, bypassing first-pass metabolism, and improving patient compliance. In this article, we report on the new formulations of microemulsion-based gels suitable for topical pharmaceutical applications using biocompatible and ecological ingredients. For this, two biocompatible µE formulations comprising clove oil/Brij-35/water/ethanol (formulation A) and clove oil/Brij-35/water/1-propanol (formulation B) were developed to encapsulate and improve the load of an antimycotic drug, Clotrimazole (CTZ), and further gelatinized to control the release of CTZ through skin barriers. By delimiting the pseudo-ternary phase diagram, optimum µE formulations with clove oil (∼15%) and Brij-35 (∼30%) were developed, keeping constant surfactant/co-surfactant ratio (1:1), to upheld 2.0 wt % CTZ. The as-developed formulations were further converted into smart gels by adding 2.0 wt % carboxymethyl cellulose (CMC) as a cross-linker to adhere to the controlled release of CTZ through complex skin barriers. Electron micrographs show a fine, monodispersed collection of CTZ-µE nanodroplets (∼60 nm), which did not coalesce even after gelation, forming spherical CTZ-µEG (∼90 nm). However, the maturity of CTZ nanodroplets observed by dynamic light scattering suggests the affinity of CTZ for the nonpolar microenvironment, which was further supported by the peak-to-peak correlation of Fourier transform infrared (FTIR) analysis and fluorescence measurement. In addition, HPLC analysis showed that the in vitro permeation release of CTZ-µEG from rabbit skin in the ethanolic phosphate buffer (pH = 7.4) was significantly increased by >98% within 6.0 h. This indicates the sustained release of CTZ in µEBG and the improvement in transdermal therapeutic efficacy of CTZ over its traditional topical formulations.

Hybrid Nanofluids as Renewable and Sustainable Colloidal Suspensions for Potential Photovoltaic/Thermal and Solar Energy Applications.

The comparative utilization of solar thermal or photovoltaic systems has significantly increased to fulfill the requirement of electricity and heat since few decades. These hybrid systems produce both thermal and electrical energy simultaneously. In recent times, increasing interest is being redirected by researchers in exploiting variety of nanoparticles mixed with miscellaneous base fluids (hybrid nanofluid) for these hybrid systems. This new class of colloidal suspensions has many fascinating advantages as compared to conventional types of nanofluids because of their modified and superior rheological and thermophysical properties which makes them appealing for solar energy devices. Here, we have attempted to deliver an extensive overview of the synthetic methodologies of hybrid nanofluids and their potential in PV/T and solar thermal energy systems. A detailed comparison between conventional types of nanofluids and hybrid nanofluids has been carried out to present in-depth understanding of the advantages of the hybrid nanofluids. The documented reports reveal that enhanced thermal properties of hybrid nanofluids promise the increased performance of solar thermal PV/T systems. Additionally, the unique properties such as nanoparticles concentration and type of base fluid, etc. greatly influence the behavior of hybrid nanofluidic systems. Finally, the outlook, suggestions, and challenges for future research directions are discussed.