Toward the Improvement of Silicon-Based Composite Electrodes via an In-Situ Si@C-Graphene Composite Synthesis for Li-Ion Battery Applications.

Using Si as anode materials for Li-ion batteries remain challenging due to its morphological evolution and SEI modification upon cycling. The present work aims at developing a composite consisting of carbon-coated Si nanoparticles (Si@C NPs) intimately embedded in a three-dimensional (3D) graphene hydrogel (GHG) architecture to stabilize Si inside LiB electrodes. Instead of simply mixing both components, the novelty of the synthesis procedure lies in the in situ hydrothermal process, which was shown to successfully yield graphene oxide reduction, 3D graphene assembly production, and homogeneous distribution of Si@C NPs in the GHG matrix. Electrochemical characterizations in half-cells, on electrodes not containing additional conductive additive, revealed the importance of the protective C shell to achieve high specific capacity (up to 2200 mAh.g-1), along with good stability (200 cycles with an average Ceff > 99%). These performances are far superior to that of electrodes made with non-C-coated Si NPs or prepared by mixing both components. These observations highlight the synergetic effects of C shell on Si NPs, and of the single-step in situ preparation that enables the yield of a Si@C-GHG hybrid composite with physicochemical, structural, and morphological properties promoting sample conductivity and Li-ion diffusion pathways.

Electrochemical and X-ray Photoelectron Spectroscopic Study of Early SEI Formation and Evolution on Si and Si@C Nanoparticle-Based Electrodes.

Carbon coatings can help to stabilize the electrochemical performance of high-energy anodes using silicon nanoparticles as the active material. In this work, the comparison of the behavior and chemical composition of the Solid Electrolyte Interphase (SEI) was carried out between Si nanoparticles and carbon-coated Si nanoparticles (Si@C). A combination of two complementary analytical techniques, Electrochemical Impedance Spectroscopy and X-ray Photoelectron Spectroscopy (XPS), was used to determine the intrinsic characteristics of the SEI. It was demonstrated that the SEI on Si particles is more resistive than the SEI on the Si@C particles. XPS demonstrated that the interface on the Si particles contains more oxygen when not covered with carbon, which shows that a protective layer of carbon helps to reduce the number of inorganic components, leading to more resistive SEI. The combination of those two analytical techniques is implemented to highlight the features and evolution of interfaces in different battery technologies.

Effect of Size and Shape on Electrochemical Performance of Nano-Silicon-Based Lithium Battery.

Silicon is a promising material for high-energy anode materials for the next generation of lithium-ion batteries. The gain in specific capacity depends highly on the quality of the Si dispersion and on the size and shape of the nano-silicon. The aim of this study is to investigate the impact of the size/shape of Si on the electrochemical performance of conventional Li-ion batteries. The scalable synthesis processes of both nanoparticles and nanowires in the 10-100 nm size range are discussed. In cycling lithium batteries, the initial specific capacity is significantly higher for nanoparticles than for nanowires. We demonstrate a linear correlation of the first Coulombic efficiency with the specific area of the Si materials. In long-term cycling tests, the electrochemical performance of the nanoparticles fades faster due to an increased internal resistance, whereas the smallest nanowires show an impressive cycling stability. Finally, the reversibility of the electrochemical processes is found to be highly dependent on the size/shape of the Si particles and its impact on lithiation depth, formation of crystalline Li15Si4 in cycling, and Li transport pathways.

High-Temperature All Solid-State Microsupercapacitors based on SiC Nanowire Electrode and YSZ Electrolyte.

We demonstrate a symmetric supercapacitor by using yttria-stabilized zirconia (YSZ) as the electrolyte and silicon carbide nanowires (SiC NWs) as the electrode. The stacked symmetric SiC NWs/YSZ/SiC NWs supercapacitors exhibit excellent thermal stability and high areal capacitance at temperatures above 300 °C. The supercapacitor functions well at a record high temperature of 450 °C, yielding an areal capacitance of 92 µF cm(-2) at a voltage scan rate of 100 mV s(-1). At this temperature, it is also capable of withstanding current densities up to 50 µA cm(-2), yielding a maximum areal power density of 100 µW cm(-2). Good cycling stability is demonstrated with a capacitance retention of over 60% after 10,000 cycles at the operation temperature of 450 °C and a scan rate of 200 mV s(-1).

Selective ultrathin carbon sheath on porous silicon nanowires: materials for extremely high energy density planar micro-supercapacitors.

Microsupercapacitors are attractive energy storage devices for integration with autonomous microsensor networks due to their high-power capabilities and robust cycle lifetimes. Here, we demonstrate porous silicon nanowires synthesized via a lithography compatible low-temperature wet etch and encapsulated in an ultrathin graphitic carbon sheath, as electrochemical double layer capacitor electrodes. Specific capacitance values reaching 325 mF cm(-2) are achieved, representing the highest specific ECDL capacitance for planar microsupercapacitor electrode materials to date.

Semiconductor nanowires directly grown on graphene--towards wafer scale transferable nanowire arrays with improved electrical contact.

We present for the first time the growth of dense arrays of silicon and silicon carbide nanowires directly on graphene as well as methods of transferring these novel hybrids to arbitrary substrates. Improved electrical contact for SiC nanowire/graphene hybrid is demonstrated in the application of a robust supercapacitor electrode.