Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 2 de 2
Filter
Add more filters










Database
Language
Publication year range
1.
IEEE Trans Biomed Circuits Syst ; 14(5): 1097-1107, 2020 10.
Article in English | MEDLINE | ID: mdl-32956066

ABSTRACT

A wideband wearable electromagnetic (EM) head imaging system for brain stroke detection is presented. The proposed system aims at overcoming the challenges of size, rigidity, and complex structures of existing systems. The proposed system is built into a light-weight and compact imaging platform, which integrates a 16-element antenna array into a highly flexible custom-made wearable cap made of a cost-effective and robust room-temperature-vulcanizing (RTV) silicone. The system mitigates the mismatch between the skin and antenna array by introducing a flexible high-permittivity matching layer. The utilized compact antenna demonstrates wideband operational frequency over 0.6-2.5 GHz with a low signal distortion, safe values of SAR, and unidirectional radiations. The system is experimentally validated on realistic head phantoms. The polar sensitivity encoding (PSE) image processing algorithm is utilized to generate 2D images of different testing scenarios. The obtained images of a stroke-like target inside the head phantoms demonstrate the merits and feasibility of the system for preclinical trials.


Subject(s)
Diagnostic Imaging , Head , Electromagnetic Phenomena , Head/diagnostic imaging , Microwaves , Phantoms, Imaging
2.
IEEE Trans Biomed Circuits Syst ; 13(1): 124-134, 2019 02.
Article in English | MEDLINE | ID: mdl-30369449

ABSTRACT

Given the increased interest in a fast, portable, and on-spot medical diagnostic tool that enables early diagnosis for patients with brain stroke, a new approach of a wearable electromagnetic head imaging system based on the polymer material is proposed. A flexible low-profile, wideband, and unidirectional antenna array with electromagnetic band gap (EBG) and metamaterial (MTM) unit cells reflector is utilized. The designed antenna consists of a 4 × 4 radiating patch loaded with symmetrical extended open-ended U-slots and fed by combination of series and corporate transmission lines. A mushroom-like 10-EBG unit cell arrays are arranged around the feeding network to reduce surface waves, whereas 4 × 4 MTM unit cells are placed on the back-side of the antenna to enable unidirectional radiation. The antenna is designed and embedded on a multilayer low cost, low loss, transparent, and robust polymer poly-di-methyl-siloxane (PDMS) substrate and optimized to operate in contact with the human head. The simulated and measured results show that the antenna has a fractional bandwidth of 53.8% (1.16-1.94 GHz), more than 80% of radiation efficiency, and satisfactory field penetration in the head tissues with a safe specific absorption rate. An eight-element array is then configured on 300 × 360 × 4.1 mm3 PDMS material covering an average human head size and used as a worn part of the imaging system. A realistic-shaped 3-D specific anthropomorphic mannequin (SAM) head phantom is used to verify the performance of the designed array. The imaging results indicate the possibility of using the designed conformal array to detect a bleeding inside the brain using a confocal image algorithm.


Subject(s)
Brain/pathology , Electromagnetic Radiation , Phantoms, Imaging , Stroke/diagnosis , Wearable Electronic Devices , Computer Simulation , Head , Humans , Imaging, Three-Dimensional , Magnetic Resonance Imaging , Microwaves , Numerical Analysis, Computer-Assisted , Polymers , Reproducibility of Results
SELECTION OF CITATIONS
SEARCH DETAIL
...