Comparison of De-Torque and Failure Load Evaluation of Selective-Laser-Sintered CoCr, CAD-CAM ZrO, and Machined Implant Abutment/Restoration.

AIM: This study aimed to compare the torque loss, fracture load, compressive strength, and failure types of selective-laser-sintered cobalt chromium (SLM-Co-Cr), computer-aided design and computer-aided manufacturing zirconium oxide (CAD-CAM-ZrO), and machined titanium (Ti) implant abutments. METHODS: Thirty endosseous dental implants were vertically embedded with machined Ti (control group), CAD-CAM-ZrO, and SLM-Co-Cr abutments. Abutment fabrication involved CAD-CAM milling and SLM technology. The de-torque assessment included preload reverse torque values (RTVs), cyclic loading, and post-RTVs using a customized protocol. Fracture load assessment employed ISO-14801 standards, and statistical analysis was conducted using ANOVA and Tukey Post hoc tests (p < 0.05). RESULTS: In pre-load RTVs, SLM-Co-Cr showed the lowest mean torque loss (24.30 ± 2.13), followed by machined Ti (27.33 ± 2.74) and CAD-CAM-ZrO (22.07 ± 2.20). Post-load RTVs decreased for all groups. Fracture load and compressive strength were highest for SLM-Co-Cr, with significant differences among groups (p < 0.001). Fracture types included abutment failures in SLM-Co-Cr and machined Ti, while CAD-CAM-ZrO exhibited crown separation with deformation. CONCLUSION: SLM-Co-Cr-fabricated implant abutments exhibited superior stability and resistance to rotational forces, higher fracture loads, and greater compressive strength compared to CAD-CAM-ZrO and machined Ti.

The efficacy of iatrosedation and music listening techniques in attenuating dental anxiety in patients undergoing dental crown preparation: A randomized clinical trial.

Dental anxiety is a common problem encountered in dental clinics that affects both patients and dentists. Adequate management of dental anxiety is critical for optimal treatment outcomes for the patient. This study aims to assess the efficacy of two anxiety-reduction techniques (iatrosedation and music listening) for dental crown preparation in adult patients. In this clinical trial, 60 patients were randomly assigned to three groups: Group 1, iatrosedation; Group 2, music listening; and Group 3, control. Patients in all three groups underwent dental crown preparation. To measure the anxiety levels of the patients, heart rate was calculated using a pulse oximeter, and verbal rating scale scores were assessed. One-way analysis of variance, post hoc analysis, and Spearman's correlation were used to compare the mean values of the three groups. Significant differences were observed in the heart rate and verbal rating scale scores among individuals in the study groups. A more substantial reduction in anxiety levels was found in patients exposed to iatrosedation (Group 1), which was followed by music listening (Group 2). Recorded heart rate and verbal rating scores were the highest in the control group patients. The iatrosedation technique significantly reduced dental anxiety for patients undergoing dental crown treatment; however, music listening was less effective than iatrosedation. Educating patients regarding the dental care they are about to receive is vital for reducing their anxiety.

Decontamination of lithium disilicate ceramics using various photosensitizers, herbal and chemical disinfectants, and the effect of surface conditioners on bond strength values.

AIM: To assess and compare the antimicrobial efficacy of disinfectants on lithium disilicate ceramic (LDC) used in dental applications and shear bond strength (SBS) of LDC after using different conditioners hydrofluoric acid (HF), self-etching ceramic primers (SECP) and Neodymium-doped yttrium orthovanadate (Nd: YVO4). MATERIALS AND METHODS: One hundred and twenty LDC discs were fabricated by auto-polymerizing acrylic resin using the lost wax technique. S. aureus, S. mutans, and C. albican were inoculated on thirty discs (n = 30 each). Each group was further divided into three subgroups based on different disinfecting agents used (n = 30) Group 1: Garlic extract, Group 2: Rose Bengal (RB) activated by PDT, and Group 3: Sodium hypochlorite (NaOCl). An assessment of the survival rate of microorganisms was performed. The remaining thirty samples were surface treated using three different LDC surface conditioners (n = 10) Group 1: HF + Silane (S), group 2: SECP, and Group 3: Nd: YVO4 laser+S. SBS and failure mode analysis were performed using a universal testing machine and stereomicroscope at 40x magnification, The statistical analysis was conducted using one-way ANOVA and Post Hoc Tukey test. RESULTS: Garlic extract, RB, and 2% NaOCl sample displayed comparable outcomes of antimicrobial potency against C. albicans, S aureus, and S. mutans (p > 0.05). Furthermore, SBS analysis showed HF+S, SECP, and Nd: YVO4+S exhibited comparable outcomes of bond strength (p > 0.05). CONCLUSION: Garlic extract and Rose bengal activated by PDT can be contemplated as alternatives to the chemical agent NaOCl used for LDC disinfection. Similarly, SECP and Nd: YVO4 possess the potential to be used for the surface conditioning of LDC to improve the bond integrity with resin cement.

Fiber post bonding with beta-tricalcium phosphate incorporated root dentin adhesive. SEM, EDX, FTIR, rheometric and bond strength study.

The aim was to formulate an experimental adhesive (EA) and added nanoparticles (NPs) of beta-tricalcium phosphate (ß-TCP) to see the impact on pushout bond strength (PBS) and other mechanical properties. Three adhesives were prepared, including EA (control, without ß-TCP NPs), 2.5%-ß-TCP NPs containing adhesive (2.5%-NPA), and 5% ß-TCP NPs containing adhesive (5%-NPA). For the characterization of the NPs, scanning electron microscopy (SEM) and energy dispersive X-ray (EDX) spectroscopy was accomplished. For the adhesive's characterization, rheological assessment, and degree of conversion (DC) analysis were performed. PBS of these adhesives against resin fiber post to root dentin, interfacial failure categories, and resin dentin interface analysis were also assessed. The ß-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). Rheological evaluation of the adhesive's showed a drop in the viscosity of all adhesives at greater angular frequencies. The greatest DC was detected for the EA group (67.54 ± 7.9) followed by 2.5%-NPA group (45.32 ± 5.1), whereas the lowest DC values were seen for the 5%-NPA group (38.97 ± 6.5). Concerning PBS, the 2.5%-NPA revealed the highest values at the coronal (12.81 ± 3.0) and middle (8.50 ± 2.3) sections, whereas, for the apical section, the highest PBS values were seen for the 5%-NPA (4.9 ± 1.6). Most of the failures for all adhesive groups were seen at the adhesive-dentin interface (cohesive type failures) for all root segments (coronal, middle, and apical). The resin-dentin interface analysis verified hybrid layer and resin tag formation for all adhesives, but the presence of dispersed ß-TCP NPs was only seen in the two NP-reinforced adhesives. The adding of ß-TCP NPs in the adhesive could be beneficial as it could improve its PBS. Suitable rheological properties and dentin interaction were also observed for NP-reinforced adhesives. A reduced DC was seen for both ß-TCP NP-containing adhesives as compared to the EA. RESEARCH HIGHLIGHTS: Experimental adhesives were reinforced with beta-tricalcium phosphate (ß-TCP) nanocrystals. The ß-TCP NPs were seen as agglomerated asymmetrical particles on SEM. These NPs were composed primarily of calcium (Ca), and phosphorus (P). ß-TCP adhesives demonstrated superior pushout bond strength and a drop in the adhesive viscosity at greater angular frequencies compared to control adhesive. The greatest DC was detected for the EA group followed by 2.5%- ß-TCP group, whereas the lowest DC values were for the 5%- ß-TCP group.

Effect on martens hardness and pushout bond strength of fiber post to canal dentin final irrigated with fotoenticine, chitosan, and ozone.

AIMS: To estimate the effect of contemporary final root canal irrigants (Ozonated water (OW), Chitosan, and Fotoenticine (FTC) on the bond scores of glass fiber post (GFP) and Martens hardness (MH) of root dentin. MATERIALS AND METHODS: Sixty extracted human premolars having a single straight canal that ends in a closed apex were included. Specimens were de-crowned till the cementoenamel junction preserving 12 mm of root length and were mounted vertically. Canal therapy was performed using a crown-down approach. Obturation was performed followed by post-space preparation. Samples were allocated into 4 groups based on chemical irrigations and photosensitizers used(n = 15). Group 1 (5.25% NaOCl + 17% EDTA), group 2 (5.25% NaOCl + FTC), group 3 (5.25% NaOCl + Chitosan), group 4 (5.25% NaOCl + OW). The ultra microhardness tester was put under a load of 5 mN at a speed of 1.5 mN/s for 1 s to assess the MH. The fiber post was luted with dual-cure cement and slices of 1 mm were prepared from each third of the tooth. PBS and failure mode analysis were performed using a universal testing machine (UTM) and stereomicroscope respectively. ANOVA and Tukey multiple comparisons t-tests for assessment of PBS and MH p > 0.05 RESULTS: Group 1 (5.25% NaOCl + 17% EDTA) exhibited the highest MH (0.19 ± 0.04 GPa). Whereas, group 2 (5.25% NaOCl + FTC) displayed the lowest MH (0.011 ± 0.14 GPa). The highest PBS was exhibited by the coronal third of group 1 (5.25% NaOCl + 17% EDTA) (7.11 ± 0.81 MPa). The apical section of group 3 specimens (5.25% NaOCl + Chitosan) (2.33 ± 0.26 MPa) unveiled the lowest PBS. Intergroup comparison analysis revealed that group 2 and group 3 displayed comparable outcomes of PBS. Group 1 and Group 4 also demonstrated no significant difference in the bond scores in all three sections. CONCLUSION: OW as a final irrigant can be used as an alternative to EDTA as it improves the bond strength with minimum impact on marten hardness.

Efficacy of indocyanine green and methylene blue mediated-photodynamic therapy on peri-implant outcomes among diabetics with peri-implant mucositis.

BACKGROUND: This study aimed to assess the efficacy of indocyanine green (ICG)-mediated versus methylene blue (MB)-mediated photodynamic therapy (PDT) as an adjunct to conventional mechanical debridement (MD) on the peri­implant clinical, radiographic, microbiological, and immunological outcomes among diabetics with peri­implant mucositis (pi-M). METHODS: For this 3-month follow-up study, diabetics having pi-M were randomly divided into 3 groups: group-I (n = 20) subjects received only MD; group-II (n = 20) participants received ICG-mediated adjunct PDT; and group-III (n = 20) subjects received MB-mediated adjunct PDT. Peri-implant clinical (i.e., plaque index [PI], bleeding on probing [BOP], probing depth [PD]), radiographic (crestal bone loss [CBL]), microbiological (Fusobacterium nucleatum [F. nucleatum], Tannerella forsythia [T. forsythia], Prevotella intermedia [P. intermedia], Porphyromonas gingivalis [P. gingivalis], Aggregatibacter actinomycetemcomitans [A. actinomycetemcomitans]), and immunological (interleukin [IL]-6, IL-1ß, tumor necrosis factor-alpha [TNF-α]) outcomes were assessed at baseline and 3-month follow-up. RESULTS: Mean changes between baseline and 3-month follow-up in peri­implant clinico-radiographic parameters were significantly different between control (PI: 12.42±21.80%; BOP: 12.10±19.30%; PD: 0.45±0.41 mm; CBL: 1.10±1.02 mm) and test groups (ICG-mediated PDT [PI: 26.55±25.80%; BOP: 28.77±29.24%; PD: 0.84±0.62 mm; CBL: 1.98±1.85 mm] and MB-mediated PDT [PI: 27.24±26.15%; BOP: 27.71±28.16%; PD: 0.85±0.63 mm; CBL: 1.95±1.80 mm]), however comparable differences were observed in peri­implant PI, BOP, PD, and CBL between group-II and group-III participants (p>0.05). The proportions of T. forsythia were significantly reduced in group-II (4.78 × 104 colony-forming unit per milliliter [CFU/mL]) and group-III (4.76 × 104 CFU/mL) as compared to group-I (-4.40 × 103 CFU/mL) at 3-month follow-up (p = 0.02). No statistically significant differences were observed between the study groups regarding the proportions of the other assessed target bacterial species. For IL-6 (group-I: 210±108; group-II: 298±165; group-III: 277±121 pg/mL; p = 0.03), IL-1ß (group-I: 101±95; group-II: 84±98; group-III: 86±74 pg/mL; p = 0.02), and TNF-α (group-I: 336±121; group-II: 385±210; group-III: 366±198 pg/mL; p = 0.03) peri­implant sulcular fluid [PISF] levels, all three study groups demonstrated statistically significant reduction at 3-month follow-up. CONCLUSIONS: ICG-mediated and MB-mediated adjunctive PDT showed statistically significant improvements in peri­implant clinical, radiographic, microbiological, and immunological parameters as compared to conventional MD alone at 3-month follow-up among diabetics with pi-M. However, comparable outcomes were demonstrated by ICG-mediated and MB-mediated adjunctive PDT regarding the assessed peri­implant parameters.