ABSTRACT
A serious risk that harms the safe use of water and affects aquatic ecosystems is water pollution. This occurs when the water's natural equilibrium is disrupted by an excessive amount of substances, both naturally occurring and as a byproduct of human activities, that have varied degrees of toxicity. Radiation from Cs isotopes, which are common components of radioactive waste and are known for their long half-lives (30 years), which are longer than the natural decay processes, is a major source of contamination. Adsorption is a commonly used technique for reducing this kind of contamination, and zeolite chabazite has been chosen as the best adsorbent for cesium in this particular situation. The purpose of this research is to investigate a composite material based on magnesium phosphate cement (MPC). Magnesium oxide (MgO), potassium dihydrogen phosphate (KH2PO4), and properly selected retarders are used to create the MPC. The optimal conditions for this composite material are investigated through the utilization of X-ray diffraction, scanning electron microscopy, BET surface area analysis, and atomic absorption spectroscopy. The principal aim is to enable innovations in the elimination of radioactive waste-contaminated water using effective cesium removal. The most promising results were obtained by using KH2PO4 as an acid, and MgO as a base, and aiming for an M/P ratio of two or four. Furthermore, we chose zeolite chabazite as a crucial component. The best adsorption abilities for Cs were found at Qads = 106.997 mg/g for S2 and Qads = 122.108 mg/g for S1. As a result, zeolite is an eco-friendly material that is a potential usage option, with many benefits, such as low prices, stability, and ease of regeneration and use.
ABSTRACT
The results of an experimental and mathematical study into the MmNi4.2Mn0.8 compound's hydrogen storage properties are presented in the present research. Plotting and discussion of the experimental isotherms (P-C-T) for different starting temperatures (288 K, 298 K, 308 K, and 318 K) were carried out first. Then, the enthalpy and entropy of formation (ΔH0, ΔS0) were deduced from the plot of van't Hoff. Following that, the P-C-T were contrasted with a mathematical model developed via statistical physics modeling. The steric and energetic parameters, such as the number of the receiving sites (n1, n2), their densities (Nm1, Nm2), and the energy parameters (P1, P2) of the system, were calculated thanks to the excellent agreement between the numerical and experimental results. Therefore, plotting and discussing these parameters in relation to temperature preceded their application in determining the amount of hydrogen in each type of site per unit of metal ([H/M]1, [H/M]2) as well as for the entire system [H/M] versus temperature and pressure besides the absorption energies associated with each kind of site (ΔE1, ΔE2) and the thermodynamic functions (free energy, Gibbs energy, and entropy) that control the absorption reaction.
ABSTRACT
In this study, we used a novel composite material based on magnesium phosphate cement (MPC) to explore the retention of fluoride from used water. Dead-burned magnesium oxide (MgO), ammonium dihydrogen phosphate (NH4H2PO4), and a few retarders were used to create this particular substance. Several studies have corroborated the performance of using aluminum in the capture of fluoride. From this perspective, we attempted to reinforce our matrix with different quantities of aluminum, which increased the resistance of the composite in water. The optimal conditions that were obtained were evaluated and scrutinized using a range of techniques, including scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), Fourier transforms infrared spectroscopy (FTIR), and Brunauer-Emmett-Teller (BET). The adsorbents demonstrated a powerful ability to remove fluoride from contaminated water and the defluoridation capacity was evaluated at 4.84 mg/g. Equilibrium modeling was carried out, and the experimental data were expressed in accordance with the Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich isotherms.
ABSTRACT
In this research work, new composite materials based on magnesium phosphate cement (MPC) were developed to evaluate the retention of fluorine from wastewater. This material was prepared with dead burned magnesia oxide (MgO), ammonium dihydrogen phosphate (NH4H2PO4), and some retarding agents. We chose to synthesize with hydrogen peroxide instead of water; alumina and zeolite were also added to the cement. The obtained optimal conditions were studied and analyzed by X-ray diffraction (XRD) and scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), BET, and thermogravimetric analysis (TGA). The adsorbents showed a strong ability to remove fluoride from contaminated water, and the best defluoridation capacity was evaluated as 2.21 mg/g for the H2O2 cement. Equilibrium modeling was performed, and the experimental data were presented according to the isotherms of Langmuir, Freundlich, Temkin, and Dubinin-Radushkevich.
