ABSTRACT
This study aimed to evaluate the bioactivities and biocompatibilities of porous polylactic acid (PLA) reinforced with cellulose nanofiber (CNF) scaffolds. The in vitro degradation behaviors of the porous PLA/CNF scaffolds were systematically measured for up to 8 weeks in a phosphate-buffered saline medium at 37 °C. The reinforcement of CNF resisted the biodegradation of the scaffolds. The in vitro cytotoxicity and biocompatibility of the scaffolds were determined using the Beas2B American Type Culture Collection cells. The 3-(4,5-cimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide cytotoxicity and proliferation tests showed that the scaffolds were non-toxic, and epithelial cells grew well on the scaffold after 7 days of culture, whereas the percentage of cell proliferation on the PLA/CNF15 scaffold was the largest, 130 %. A scratch wound-healing assay was performed to evaluate the suitability of the scaffolds for cell migration. The results demonstrated that the scaffolds exhibited good cell migration towards nearly complete wound closure.
Subject(s)
Cellulose , Nanofibers , Tissue Scaffolds , PolyestersABSTRACT
This study investigated the impact response behaviours of pineapple leaf fibre (PALF)/carbon hybrid laminate composites for different ply orientations and stacking sequences. The laminates were manufactured using a vacuum infusion approach with various stacking sequences and ply orientations classified as symmetric quasi-isotropic, angle-ply symmetric, and cross-ply symmetric. The laminates were analysed using an IMATEK IM10 drop weight impact tester with an increment of 5 J until the samples were perforated. This investigation reveals that the overall impact properties of PALF and carbon as reinforcements were improved by a beneficial hybridised effect. The laminates with an exterior carbon layer can withstand high impact energy levels up to 27.5 J. The laminate with different stacking sequences had a lower energy transfer rate and ruptured at higher impact energy. The laminates with ply orientations of [0°/90°] and [±45°]8 exhibited 10% to 30% better energy absorption than those with ply orientations of [±45°2, 0°/90°2]s and [0°/90°2, ±45°2]s due to energy being readily transferred within the same linear ply orientation. Through visual inspection, delamination was observed to occur at the interfaces of different stacking sequences and ply orientations.
ABSTRACT
Epoxy polymer composites embedded with thermally conductive nanofillers play an important role in the thermal management of polymer microelectronic packages, since they can provide thermal conduction properties with electrically insulating properties. An epoxy composite system filled with graphitic-based fillers; multi-walled carbon nanotubes (MWCNTs), graphene nanoplatelets (GNPs) and ceramic-based filler; silicon carbide nanoparticles (SiCs) was investigated as a form of thermal-effective reinforcement for epoxy matrices. The epoxy composites were fabricated using a simple fabrication method, which included ultrasonication and planetary centrifugal mixing. The effect of graphite-based and ceramic-based fillers on the thermal conductivity was measured by the transient plane source method, while the glass transition temperature of the fully cured samples was studied by differential scanning calorimetry. Thermal gravimetric analysis was adopted to study the thermal stability of the samples, and the compressive properties of different filler loadings (1-5 vol.%) were also discussed. The glass temperatures and thermal stabilities of the epoxy system were increased when incorporated with the graphite- and ceramic-based fillers. These results can be correlated with the thermal conductivity of the samples, which was found to increase with the increase in the filler loadings, except for the epoxy/SiCs composites. The thermal conductivity of the composites increased to 0.4 W/mK with 5 vol.% of MWCNTs, which is a 100% improvement over pure epoxy. The GNPs, SiCs, and MWCNTs showed uniform dispersion in the epoxy matrix and well-established thermally conductive pathways.
