Evaluation of complacency about dental implants with shared decision making and satisfaction scores: A cross-sectional study.

BACKGROUND: The dentist-patient relationship is delicate. Engaging the patient in the dental treatment planning especially for lengthy procedures as dental implants improves the relation as well as treatment outcomes including patient satisfaction. We aimed at evaluating the importance of Shared Decision making (SDM) and level of satisfaction among dental implant patients by employing SDM and satisfaction scores. MATERIALS & METHODS: The present cross-sectional study was pursued between April 2019 to September 2019, among dental implant patients (n = 144) who have completed their prosthetic part of implant treatment with at least 3 months of post-restoration evaluation. Demographic and implant data were collected from electronic filing system (Salud) as well as measurement of SDM score. Data were analyzed using SPSS 24.0 version statistical software. RESULTS: The mean satisfaction score was higher for implant placement with Periodontists (31.9%). However, among surgical specialist the mean satisfaction score was found to be higher for oral surgeons who had 1-5 years of experience (46.5%). Patients reported that their decision making was greatly influenced by the treating dentist. A statistical significance was found where (64.6%) of Implant patients would like to undergo the procedure again (p < 0.0001). CONCLUSION: Shared decision-making and patient satisfaction enables the treatment delivery to be more effective and ethical, in addition to being patient-centered care.

Are dentists more prone to metabolic syndrome and occupational stress?

OBJECTIVE: The aim of this study was to investigate the prevalence of metabolic syndrome (MS) among dentists in Riyadh, Saudi Arabia. The study also explored the causes of occupational stress among the participating dentists. MATERIALS & METHODS: The participants included a conveniently selected sample of dentists (N = 126; Males = 65; Females = 61). The participants' anthropometric measurements/blood sample analysis were carried out and they completed a self-administered questionnaire. Data analysis included demographics, gender/age wise comparison using SPSS (p < 0.05). For the diagnosis of MS, updated criteria of the National Cholesterol Education Program was applied. RESULTS: Participants diagnosed with MS were 13 (10.3%), Males = 11(8.7%) and Females = 2(1.5%). Physical activity of 6 (15.8%) with MS was only 0-2 hours/week. 9 (14.5%) participants with MS declared positive family history for MS. The average systolic (117.55±11.33) and diastolic blood pressure (71.9±9.34) of the participants was found to be normal with no gender wise statistical difference. No gender wise statistical differences (p > 0.05) were observed for cholesterol, triglycerides and HDL. However, significant difference (p = 0.00) was found for the fasting glucose level (Males = 5.69±1.49; Females = 4.94±0.42). Overall mean scoring (3.00±1.11) for the stress showed that the participants fall into the average/moderate level of stress category (Males = 3.16±1.02; Females = 2.83±1.08). Almost two third (68.26%) of the participant's responded that they were under some kind of stress. CONCLUSIONS: MS was found to be less frequent among the dentists working in the city of Riyadh. Overall, the dentists were under moderate level of occupational stress, with male dentists being more prone to work related stress.

Peri-implant Sulcular Fluid Galectin-1, Soluble Urokinase Plasminogen Activator Receptor and IL-1ß Levels under Peri-implant Inflammatory Conditions.

PURPOSE: Soluble urokinase plasminogen activator receptor (suPAR) and interleukin 1-beta (IL-1ß) are inflammatory biomarkers, whereas galectin-1 is an anti-inflammatory cytokine. The relationship between suPAR, galactin-1 and IL-1ß levels in peri-implant sulcular fluid (PISF) in relation to dental implants remains unaddressed. The aim was to assess suPAR, galectin-1, and IL-1ß levels in PISF under peri-implant inflammatory conditions. MATERIALS AND METHODS: Demographic data and information related to jaw location and duration of implants in function as well as systemic health was retrieved from patients' dental records. Peri-implant plaque and gingival indices (PI and GI, respectively), probing depth (PD) and crestal bone loss (CBL) were recorded. The PISF was collected and levels of suPAR, galectin-1 and IL-1ß were determined using standard techniques. Sample-size estimation and statistical analyses were done. Correlation of suPAR and galectin-1 with IL-1ß were assessed via logistic regression. p-values < 0.05 were considered statistically significant. RESULTS: Seventy-two patients (45 males and 27 females) with peri-implant diseases were included. Thirty-six patients (22 males and 14 females) had peri-implant mucositis; 36 (23 males and 13 females) had healthy peri-implant tissues. The PISF volume was statistically significantly higher among patients with (0.52 ± 0.05 µl) than without peri-implant diseases (0.06 ± 0.01 µl) (p < 0.001). The PISF levels of suPAR (p < 0.01), galectin-1 (p < 0.01) and IL-1ß (p < 0.01) were statistically significantly higher among patients with than without peri-implant diseases. In patients with peri-implant mucositis, PISF suPAR (p < 0.001) and galectin-1 (p < 0.001) levels correlated with PISF IL-1ß levels. In patients with peri-implant mucositis, increasing peri-implant PD and IL-1ß levels directly correlated with increased PISF suPAR (p < 0.001) and galectin-1 (p < 0.05) levels. CONCLUSION: Increased PISF levels of suPAR, galectin and IL-1ß suggest that these proteins possibly contribute towards the pathogenesis of peri-implant inflammation, and are potential biomarkers of peri-implant diseases.

Application of ß-Tricalcium Phosphate in Adhesive Dentin Bonding.

The study aimed at synthesizing ß-tricalcium phosphate (ß-TCP) nanoparticles and comparing the mechanical properties and dentin interaction of two adhesives: experimental adhesive (EA) and EA with 5 wt.% ß-TCP nanoparticles (ß-TCP-5%). These filler nanoparticles were synthesized and then characterized with scanning electron microscopy (SEM) and micro-Raman spectroscopy. The ß-TCP nanoparticles were incorporated in the adhesives to form two groups: gp-1: EA (control) and gp-2: ß-TCP-5%. These adhesives were characterized by SEM, energy-dispersive X-ray (EDX) spectroscopy and were also assessed for their micro-tensile bond strength (µTBS) with (TC) and without thermocycling (NTC). Fourier Transform Infrared (FTIR) spectroscopy was performed to evaluate the degree of conversion (DC) of two adhesives. The ß-TCP filler was seen as irregularly shaped agglomerates on SEM. The micro-Raman spectra revealed characteristic peaks associated with ß-TCP nanoparticles. Both adhesives presented suitable dentin interaction, which was demonstrated by the formation of resin tags of variable depths. The EDX analysis verified the existence of calcium (Ca) and phosphate (P) for the ß-TCP-5% group. The greatest µTBS values were shown by ß-TCP-5% group samples when they were non-thermocycled (NTC) (ß-TCP-5%-NTC: 34.11 ± 3.46) followed by the thermocycled (TC) samples of the same group (ß-TCP-5%-TC: 30.38 ± 3.66), compared with the EA group. Although the DC presented by ß-TCP-5% group was comparable to the EA group, it was still lower. The addition of ß-TCP nanoparticles in the adhesive improved its µTBS and resulted in a suitable dentin interaction, seen in the form of hybrid layer and resin tag formation. Nonetheless, a decreased DC was observed for the ß-TCP-5% adhesive. Future studies probing the effect of different filler concentrations on various properties of the adhesive are warranted.

Efficacy of Rose Bengal and Curcumin mediated photodynamic therapy for the treatment of denture stomatitis in patients with habitual cigarette smoking: A randomized controlled clinical trial.

BACKGROUND: Cigarette smoking in conjugation with bad oral hygiene is considered a typical predisposing factor for many oral diseases including denture stomatitis. This study investigated the effect of Rose Bengal (RB)-and Curcumin (CUR)-mediated photodynamic therapy (PDT) in comparison with nystatin therapy in the intervention of denture stomatitis in cigarette smokers. METHODS: Overall, 45 habitual cigarette smokers aged ~58 years having denture stomatitis were categorized into three groups: Group-I - RB-mediated PDT, Group-II - CUR-mediated PDT, and Group-III - Nystatin therapy. The primary outcome of the interest was: counts of Candida colony from denture surface and palatal mucosa, calculated as CFU/mL, whereas the prevalence of Candida species determined in 3 research groups comprised the secondary outcome. Oral swab specimens were gathered from the denture surfaces and palatal mucosa. All clinical assessments were performed at baseline, 6 weeks, and 12 weeks. RESULTS: C. albicans was the most prevalent yeast identified on both denture surfaces and palatal mucosa, followed by C. tropicalis and C. glabrata. A considerable decrease in the CFU/mL scores were observed in Group-I and Group-II at the end of the interventions and on the 12-week follow-up (p<0.05). Group-I, II, and III demonstrated clinical efficacy rates of 53%, 51%, and 49%, respectively. CONCLUSION: CUR-and RB-mediated PDT was found to be as effective as topical Nystatin therapy for the intervention of denture stomatitis among cigarette smokers.

Fracture Load of CAD/CAM Fabricated Cantilever Implant-Supported Zirconia Framework: An In Vitro Study.

The fracture resistance of computer-aided designing and computer-aided manufacturing CAD/CAM fabricated implant-supported cantilever zirconia frameworks (ISCZFs) is affected by the size/dimension and the micro cracks produced from diamond burs during the milling process. The present in vitro study investigated the fracture load for different cross-sectional dimensions of connector sites of implant-supported cantilever zirconia frameworks (ISCZFs) with different cantilever lengths (load point). A total of 48 ISCZFs (Cercon, Degudent; Dentsply, Deutschland, Germany) were fabricated by CAD/CAM and divided into four groups based on cantilever length and reinforcement of distal-abutment: Group A: 9 mm cantilever; Group B: 9 mm cantilever with reinforced distal-abutment; Group C: 12 mm cantilever; Group D: 12 mm cantilever with reinforced distal-abutment (n = 12). The ISCZFs were loaded using a universal testing machine for recording the fracture load. Descriptive statistics, ANOVA, and Tukey's test were used for the statistical analysis (p < 0.05). Significant variations were found between the fracture loads of the four ISCZFs (p = 0.000); Group-C and B were found with the weakest and the strongest distal cantilever frameworks with fracture load of 670.39 ± 130.96 N and 1137.86 ± 127.85 N, respectively. The mean difference of the fracture load between groups A (810.49 + 137.579 N) and B (1137.86 ± 127.85 N) and between C (670.39 ± 130.96 N) and D (914.58 + 149.635 N) was statistically significant (p = 0.000). Significant variations in the fracture load between the ISCZFs with different cantilever lengths and thicknesses of the distal abutments were found. Increasing the thickness of the distal abutment only by 0.5 mm reinforces the distal abutments by significantly increasing the fracture load of the ISCZFs. Therefore, an increase in the thickness of the distal abutments is recommended in patients seeking implant-supported distal cantilever fixed prostheses.

Fracture Resistance of Endodontically Treated Teeth Restored with Fiber Posts Luted with Composite Core Materials.

AIM: This study aimed to investigate the influence of using dual-cure composite core materials for fiber post luting on the fracture resistance of endodontically treated maxillary central incisors. MATERIALS AND METHODS: Fifty sound and recently extracted maxillary central incisors were endodontically treated and distributed into five groups. In the control group, access cavities were restored with the composite resin. Experimental groups had the coronal structure trimmed 2 mm above the cementoenamel junction. Teeth were restored with fiber posts and different combinations of luting and core materials: RelyX Unicem for post luting and MultiCore for core buildup; MultiCore for post luting and core buildup; RelyX Unicem for post luting and LuxaCore for core buildup; or LuxaCore for post luting and core buildup. All teeth were restored with zirconium crowns and subjected to thermocycling (6000 cycles 5/55°C). Loading of the teeth was applied at 135° to the palatal surface, using a universal testing machine at a cross-speed of 0.5 mm/minute until failure. The mode of failure was analyzed under a digital microscope. RESULTS: The fracture resistance of the control group was significantly higher than the experimental groups (p < 0.05). There was no significant difference between the experimental groups (p > 0.05). All teeth demonstrated nonrestorable failures. CONCLUSION: With the presence of the ferrule effect and crown restoration, the selected materials for post luting and core buildup have no significant influence on the fracture resistance of the endodontically treated teeth. CLINICAL SIGNIFICANCE: The use of the same dual-cure composite core materials for fiber post luting and core buildup would simplify the clinical procedure without enhancement of the fracture resistance of the endodontically treated tooth.

Influence of Er,Cr:YSGG Laser Irradiation on the Push-Out Bond Strength of Zirconia and Glass Fiber Posts with Radicular Dentin.

OBJECTIVE: This in vitro study was designed to evaluate the influence of an Er,Cr:YSGG laser on the bond strength of zirconia and glass fiber posts with root dentin. MATERIALS AND METHODS: Ninety extracted single-rooted human teeth were randomized into 6 groups (n = 15/group) on the basis of different posts (zirconia/glass fiber) and Er,Cr:YSGG laser tips (axial and radial). Specimens were prepared for push-out testing with the help of a cutting machine; six slices (2 on each cervical, middle, and apical) of approximately 1 mm thickness were sectioned for all roots on a plane perpendicular to the long axis of the post. All specimens were placed into a universal testing machine with a defined 0.5 mm/min crosshead speed until the maximum failure load was obtained. RESULTS: The highest mean push-out bond strength of the glass fiber and zirconia groups was achieved with laser treatment. The highest push-out bond strength was achieved with the axial fiber tip (7.63 ± 1.22 MPa), and the lowest was achieved with a radial fiber tip of the glass fiber group (6.98 ± 0.96 MPa). ANOVA showed a statistically significant difference between the groups (p = 0.041). The mean push-out bond strength was found to be higher with an axial fiber tip for both cervical and apical segments in the glass fiber and zirconia groups (p < 0.05). The independent t-test resulted in the overall highest mean push-out bond strength in the apical segments (p = 0.026). CONCLUSION: Within the limits of the present in vitro research study, an enhancement in the push-out bond strength of resin cement, mainly in the cervical region of the root canal, was achieved after irradiation with an Er,Cr:YSGG laser using an axial fiber tip.

Comparison of yeast species in the subgingival oral biofilm of individuals with type 2 diabetes and peri-implantitis and individuals with peri-implantitis without diabetes.

BACKGROUND: There are no studies that have investigated the presence of yeasts in the subgingival oral biofilm (OB) of type-2 diabetic and non-diabetic patients with peri-implantitis. The aim was to assess the presence of yeasts in the subgingival OB of patients with type 2 diabetes and peri-implantitis and patients with peri-implantitis without diabetes. METHODS: Patients with type 2 diabetes with peri-implantitis (group A), non-diabetic individuals with peri-implantitis and without diabetes (group B), and individuals with and without peri-implantitis (group C) were included. Lifestyle-related and demographic data were collected using a questionnaire and hemoglobin A1c levels were measured. Peri-implant plaque index (PI), bleeding on probing (BOP), and probing depth (PD) were evaluated and crestal bone loss (CBL) were measured. Subgingival OB samples were collected and oral yeasts species were identified using ChromAgar medium. Level of significance was set at P <0.05. RESULTS: The mean age of individuals in groups A (n = 43), B (n = 41), and C (n = 42) were 55.6 ± 6.4, 54.6 ± 4.5, and 57.1 ± 3.3 years, respectively. The mean HbA1c levels were higher in group A (P <0.01) than groups B and C. Peri-implant PI (P <0.01), BOP (P <0.01), PD (P <0.01), and CBL (P <0.01) were significantly higher in group A compared with patients in groups B and C. Peri-implant PI (P <0.05), BOP (P <0.05), PD (P <0.05), and CBL (P <0.05) were significantly higher among patients in group B compared with group C. Subgingival yeasts were more often isolated from the OB of patients in groups A (74.4%) and B (46.3%) than group C (7.1%). The most common yeast species identified in all groups was Candida albicans. The CFU/mL for subgingival yeasts were higher in group A than groups B (P <0.01) and C (P <0.01). The CFU/mL for subgingival yeasts were higher in group B than group C (P <0.01). CONCLUSION: Candida species (predominantly C. albicans) were more often present in the subgingival OB of patients with and without type 2 diabetes with peri-implantitis than systemically healthy individuals without peri-implant diseases.

Clinical, radiographic, and restorative peri-implant measurements of narrow and standard diameter implants in obese and nonobese patients: A 3-year retrospective follow-up study.

BACKGROUND: There is dearth of studies assessing clinical, restorative, and radiographic peri-implant outcomes around narrow diameter implants (NDIs) and standard diameter implants (SDIs) in obese and nonobese subjects. OBJECTIVE: To assess clinical, restorative, and radiographic parameters of NDIs and SDIs placed in obese and nonobese individuals. MATERIALS AND METHODS: Obese and nonobese patients requiring NDIs and SDIs in the anterior maxilla/mandible were included. Based on the implant diameter, participants were further divided into two subgroups: (a) NDIs (3.3 mm) and (b) SDIs (4.1 mm). Peri-implant clinical measurements including plaque index (PI), bleeding on probing (BOP), probing depth (PD), and radiographic crestal bone loss (CBL) were evaluated around NDIs and SDIs at 1 and 3-year follow-up. RESULTS: A total of 70 patients (35 obese and 35 nonobese) were included. Only BOP showed statistically significant differences between both the groups at patient level at 1 and 3-year follow-up (P < .05). There was no statistically significant difference in PI and PD around NDIs and SDIs between obese and nonobase patients. Statistical significant differences were observed in the total CBL around NDIs and RDIs among obese and nonbase subjects at 3 year follow-up (P < .05). CONCLUSION: Both NDIs and SDIs show consistent clinical stability among obese and nonobase patients. Higher amount of bone loss was observed in obese patients compared to nonobase patients despite regular hygiene maintenance.

Clinical and radiographic indices around narrow diameter implants placed in different glycemic-level patients.

BACKGROUND: Studies assessing peri-implant clinical and marginal bone resorption (MBR) around narrow diameter implants (NDIs) placed in different glycemic levels are uninvestigated. OBJECTIVE: The present 3-year retrospective follow-up investigation was designed to explore clinical and radiographic status of NDIs placed in individuals with different glycemic control levels. MATERIALS AND METHODS: Patients with serum hemoglobin A1c (HbA1c) levels ≥6.5% (Group-1), 5.7%-6.4% (Group-2), and 4.0%-5.0% (Group-3) were included. Clinical indices evaluating bleeding on probing (BOP), plaque scores (PI), peri-implant probing depth (PD), and MBR were recorded around NDIs at 1-, 2-, and 3-year follow-up. Serum HbA1c test was carried out for all patients to assess the profile of glycosylated hemoglobin at 1 and 3 years of follow-up. RESULTS: A significant reduction in mean HbA1c levels from year 1 to year 3 follow-up period was seen in Group-1 only. PI varied from 0.40 in Group 1 at 2 year and 0.42 at 3-year follow-up to 0.18 at 2-year (P = 0.032) and 0.17 at 3-year (P = 0.018) follow-up, respectively. Greater BOP was noted in Group 1 (0.53) as compared with Group 2 (0.42) and Group 3 (0.21) (P = 0.048) at 3-year follow-up. PD after 3 year ranged from 2.04 mm in Group 3 to 2.32 mm in Group 1 that showed statistically significant difference (P = 0.037). No statistical significant differences were observed in MBR at any time point between the groups. CONCLUSION: The results of this short-term follow-up study indicate that NDIs show clinical and radiographic stability, provided oral cleanliness and glycemic levels are relatively maintained. Further long-term clinical studies are needed to evaluate implant stability over the period along with controlled glycemic status.

Fracture resistance of endodontically treated teeth restored with indirect composite inlay and onlay restorations - An in vitro study.

OBJECTIVE: The purpose of this in vitro study was to evaluate and compare the fracture resistance and fracture mode of extensive indirect inlay and onlay composite resin restorations performed for endodontically treated premolars. MATERIALS AND METHODS: A total of 55 extracted maxillary premolars were randomly divided into four groups. The first group (n = 15) remained untreated to serve as a positive control; the second group (n = 15) was endodontically treated with inlay cavities prepared and restored with indirect composite inlay restorations; the third group (n = 15) was also endodontically treated with onlay cavities prepared and restored with indirect composite onlay restorations; and the fourth group (n = 10) was endodontically treated with mesio-occlusodistal (MOD) cavities prepared and left unrestored to serve as negative controls. Dual cure indirect composite resin was used to fabricate the inlay and onlay restorations performed for the second and third groups, respectively. All teeth were subjected to compressive axial loading test using a metal ball (6 mm in diameter) in a universal testing machine (Instron 1195) with a cross-head speed of 0.5 mm/min until a fracture occurred. Statistical analysis of fracture resistance and fracture mode were performed with analysis of variance (ANOVA) (α = 0.05) and Kruskal-Wallis (α = 0.05) tests, respectively. RESULTS: For the four treatment groups, the mean fracture resistance values were 1326.9 N, 1500.1 N, 1006.1 N, and 702.7 N, respectively. Statistical analyses showed no significant differences between the mean fracture resistance of the intact tooth group and the inlay restoration group (p > 0.05), while significant differences were observed between the mean fracture resistance of all the other groups (p < 0.05). The Kruskal-Wallis test showed statistically significant differences between the fracture modes of the four groups. CONCLUSION: Within the limitations of this study, endodontically treated teeth were successfully restored with indirect composite inlay and onlay restorations. However, the fractures that accompanied the inlay restorations were more severe and were unable to be restored.

Patient's Perception on the Esthetic Outcome of Anterior Fixed Prosthetic Treatment.

OVERVIEW: Patient's perception to the esthetic result of the treatment received can be different from a dentist opinion. Understanding patient's opinion, demand and expectation is part of successful treatment procedure. OBJECTIVE: The purpose of this study was to investigate patient's opinion about the esthetic result of the fixed prosthetic treatment received in upper anterior teeth. MATERIALS AND METHODS: About 90 volunteer subjects, 58 males and 32 females were given a self-evaluation questionnaire with 11 questions to respond as Yes or No. The questions regarded the esthetic result of a fixed prosthodontic treatment received for their upper anterior teeth. The same questioner was completed for each subject by three clinicians through clinical photographs for different views of subject's smile. Agreement between patients and clinicians was calculated for all subjects to evaluate patient's perception to their esthetic results. RESULTS: An agreement of 47.8 to 72.2% was observed between patients and clinicians, and the average agreement was 53.64 to 60%. The highest agreement was related to satisfaction with the color of the crown and/or bridge margin while the least agreement was related to the satisfaction with the natural looking of the restoration. CONCLUSION: There was variability in the agreement between the patients and the dentists with the satisfaction of the esthetic result of anterior restoration. Factor, such as gender, age and educational level may affect the results of the agreement.