Miscibility and Langmuir Studies of the Interaction of E2 (279-298) Peptide Sequence of Hepatitis G Virus/GB Virus-C with Dipalmitoylphosphatidyl Choline and Dimiristoylphosphatidyl Choline Phospholipids.

Mixed monolayers of E2(279-298), a synthetic peptide belonging to the structural protein E2 of the GB virus C (GBV-C), formerly know as hepatitis G virus (HGV), and the phospholipids dipalmitoylphosphatidyl choline (DPPC) and dimiristoylphosphatidyl choline (DMPC),which differ in acyl chains length, were obtained at the A/W interface (monolayers of extension) in order to provide new insights on E2/phospholipids interaction. Analysis of the surface pressure-area isotherms, Brewster angle microscopy images, relative thickness, and mean areas per molecule has allowed us to establish the conditions under which the mixed components of the monolayer are miscible or immiscible and know how the level of the E2/phospholipid interaction varies with the composition of the mixed films, the surface pressure, and the hydrocarbon chains length of the phospholipids. The steric hindrance caused by the penetration of the polymer strands into the more or less ordered hydrocarbon chains of the phospholipids was suggested to explain the differences in the peptide interaction with the phospholipids studied. Therefore, the novelty of results obtained with the Langmuir film balance technique, supplemented with BAM images allow us to achieve a deeper understanding of the interaction.

Surface behavior of peptides from E1 GBV-C protein: Interaction with anionic model membranes and importance in HIV-1 FP inhibition.

The interaction between a peptide sequence from GB virus C E1 protein (E1P8) and its structural analogs (E1P8-12), (E1P8-13), and (E1P8-21) with anionic lipid membranes (POPG vesicles and POPG, DPPG or DPPC/DPPG (2:1) monolayers) and their association with HIV-1 fusion peptide (HIV-1 FP) inhibition at the membrane level were studied using biophysical methods. All peptides showed surface activity but leakage experiments in vesicles as well as insertion kinetics in monolayers and lipid/peptide miscibility indicated a low level of interaction: neither E1P8 nor its analogs induced the release of vesicular content and the exclusion pressure values (πe) were clearly lower than the biological membrane pressure (24-30 mN m(-1)) and the HIV-1 FP (35 mN m(-1)). Miscibility was elucidated in terms of the additivity rule and excess free energy of mixing (GE). E1P8, E1P8-12 and E1P8-21 (but not E1P8-13) induced expansion of the POPG monolayer. The mixing process is not thermodynamically favored as the positive GE values indicate. To determine how E1 peptides interfere in the action of HIV-1 FP at the membrane level, mixed monolayers of HIV-1 FP/E1 peptides (2:1) and POPG were obtained. E1P8 and its derivative E1P8-21 showed the greatest HIV-1 FP inhibition. The LC-LE phase lipid behavior was morphologically examined via fluorescence microscopy (FM) and atomic force microscopy (AFM). Images revealed that the E1 peptides modify HIV-1 FP-lipid interaction. This fact may be attributed to a peptide/peptide interaction as indicated by AFM results. Finally, hemolysis assay demonstrated that E1 peptides inhibit HIV-1 FP activity.

Modification of FP-HIV activity by peptide sequences of GB virus C: a biophysical approach.

Three synthetic peptide sequences of 18 amino acid each, corresponding to different fragments of the E2 capsid protein of GB virus C (GBV-C): SDRDTVVELSEWGVPCAT (P45), GSVRFPFHRCGAGPKLTK (P58) and RFPFHRCGAGPKLTKDLE (P59) have been characterized in order to find a relationship between their physicochemical properties and the results obtained in cellular models. Experiments were performed in presence and absence of the HIV fusion peptide (FP-HIV) due to the evidences that GBV-C inhibits AIDS progression. P45 peptide showed lower surface activity and less extent of penetration into 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and 1,2-dimyristoyl-sn-glycero-3-phospho-L-serine (DMPS) (3:2, mol/mol) lipid monolayers than P58 and P59. However, P45 peptide presented higher capacity to inhibit FP-HIV induced cell-cell fusion than the other two sequences. These results were supported by fluorescence anisotropy measurements which indicated that P45 had a significant effect on the inhibition of FP-HIV perturbation of liposomes of the same lipid composition. Finally, atomic force microscopy (AFM) studies have evidenced the modification of the changes induced by the FP-HIV in the morphology of lipid bilayers when P45 was present in the medium.

Interaction of two overlapped synthetic peptides from GB virus C with charged mono and bilayers.

The physical chemistry properties and interactions of E2 (125-139) and E2 (120-139) peptide sequences from GB virus C with model cell membranes were investigated by means of several biophysical techniques in order to gain better understanding of the effect of peptide length and lipid charge on membrane binding. The peptides, having one net negative charge at the pH of the assays, interacted with monolayers of all the phospholipids regardless of the charge but with more extent with the cationic DPTAP thus indicating that the interaction had both a hydrophobic and an electrostatic component as has been observed for other peptides of the same family. The peptides were able to leakage contents of liposomes and showed fluorescence energy transfer in vesicles depending on the vesicles lipid composition. On another hand, circular dichroism has shown that the peptides exist mainly as a mixture of disordered structure and ß-type conformations in aqueous solution but diminished its unstructured content, folding preferentially into α-helical conformation upon interaction with hydrophobic solvents or positively charged lipid surfaces. Altogether, results of this work indicate that the peptides interact at a surface level, penetrate into bilayers composed of fluid lipids and that conformational changes could be responsible for this effect.

Physicochemical characterisation of four peptide sequences related to thrombospondin-1B.

Thrombospondin-1 (TSP-1) is a protein involved in angiogenesis and tumor metastasis. In a previous study, a tridecapeptide sequence of TSP-1B [KRFKQDGGWSHWG] was synthesized and its biological activity was determined as well as the activity of three related sequences TSPB-(E), TSPB-(S), and TSPB-(Abu)(6). These peptides were tested for activity on the cell growth of three human carcinoma cells lines and only TSPB-(Abu)(6) increased proliferation of MCF7 and HT-29. The main aim of this study was to perform physicochemical measurements, in a comparative way, to determine if the differences in activity could be related to physicochemical properties. Peptides were characterised by HPLC capacity factors, UV, fluorescence, and CD spectra (either in buffer solution or in the presence of lipid vesicles), surface activity, and aggregation. Moreover, the interaction of these peptides with phospholipids was determined through their penetration in monolayers of DPPC, PG, or PS as well as their miscibility in mixed monolayers. Besides, using liposomes as model membranes, the affinity of these peptides for phosphatidylcholine was measured with vesicles labeled with fluorescent markers (TMA-DPH, laurdan, pyrene). Results show that these molecules are highly hydrophilic and their surface activity is low. Mixed monolayers indicate that there is almost no miscibility. Besides, its presence does not modify noticeably the microviscosity of bilayers. Moreover, UV and fluorescence spectra of peptides were not affected by the presence of lipids in the media but CD spectra recorded in TFE/water (1/1) resulted in small changes for TSPB, TSPB-(E), and TSPB-(S) peptides. On the contrary CD spectra of TSPB-(Abu)(6) derivatives were clearly much more sensitive to the polarity of the environment. According to these data the biological activity of peptide with a cyclic aspartimide moiety at position 6 could be related to a specific conformational change in the peptide chain promoted by a hydrophobic membrane-like environment.

New GHK hydrophobic derivatives: interaction with phospholipid bilayers.

Three hydrophobic derivatives of GHK peptide containing either N-terminal hexanoyl, decanoyl or myristoyl acyl moieties were synthesized. The binding of these peptidolipids to phospholipid bilayers as well as their hemolytic activity were determined. Moreover, the influence of these peptidolipids on several physicochemical properties of liposomes was studied. Binding experiments indicate a high affinity of these peptidolipids for lipids ordered in liposomes. Nevertheless, this interaction does not promote the release of entrapped carboxyfluorescein. Experiments carried out by the asymmetric membrane method (NBD-PE/dithionite) and quenching studies (PC-pyrene/KI) indicate that this association has a protective effect suggesting that the hydrophobic moiety inserts in the external part of the bilayer and the peptide chain remains protruding from the surface hindering the entrance or the approach of reactants to it. The microviscosity of DPPC bilayers determined using TMA-DPH as fluorescent marker was not affected by the presence of peptidolipids. Besides, results indicate that myristoyl-GHK produces total hemolysis at 2.5x10(-4)M but decanoyl and hexanoyl derivatives at 5x10(-4)M induce only 10% of hemolysis.

Study of adsorption and penetration of E2(279-298) peptide into Langmuir phospholipid monolayers.

The peptide corresponding to the sequence (279-298) of the Hepatitis G virus (HGV/GBV-C) E2 protein was synthesized, and surface activity measurements, pi-A compression isotherms, and penetration of E2(279-298) into phospholipid monolayers spread at the air-water interface were carried out on water and phosphate buffer subphases. The results obtained indicated that the pure E2(279-298) Langmuir monolayer exhibited a looser packing on saline-buffered than on pure water subphase and suggest that the increase in subphase ionic strength stabilizes the peptide monolayer. To better understand the topography of the monolayer, Brewster angle microscopy (BAM) images of pure peptide monolayers were obtained. Penetration of the peptide into the pure lipid monolayers of dipalmitoylphosphatidylcholine (DPPC) and dimyristoylphosphatidylcholine (DMPC) and into mixtures of dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol (DMPC/DMPG) at various initial surface pressures was investigated to determine the ability of these lipid monolayers to host the peptide. The higher penetration of peptide into phospholipids is attained when the monolayers are in the liquid expanded state, and the greater interaction is observed with DMPC. Furthermore, the penetration of the peptide dissolved in the subphase into these various lipid monolayers was investigated to understand the interactions between the peptide and the lipid at the air-water interface. The results obtained showed that the lipid acyl chain length is an important parameter to be taken into consideration in the study of peptide-lipid interactions.

Synthesis and study of molecular interactions between phosphatidyl choline and two laminin derived peptides hydrophobically modified.

Two peptides based on the active SIKVAV sequence were synthesized and hydrophobically modified through attachment of a myristoyl residue to the amino terminal group. A comparative study was carried out on the physicochemical properties of both parent and hydrophobically modified structures. Properties studied were hydrophobicity, surface activity, spreadability on aqueous surfaces, penetration in lipid monolayers, aggregation and haemolytic activity. Results obtained indicate that myristoyl containing peptides form micelles at 10(-6) M concentration, whereas parent peptides start to aggregate at 10(-5) M. All of them are able to spread on aqueous surfaces forming stable monolayers. Concerning their haemolytic activity only one of the sequences promotes a partial lysis of erythrocytes after 30 min incubation at 37 degrees C and 10(-5) M concentration in the media.

Effect of a laminin amphiphatic sequence on DPPC ordered bilayers.

A peptide sequence, stearoyl-GESIKVAVS(NH2), related to a laminin fragment, has been synthesized. Formation of aggregates was controlled by titrating a sodium anilinonaphthalene sulphonate (ANS) solution with peptide and recording fluorescence intensity increases. The results show that this system experiences a sudden increase in fluorescence at peptide concentrations around 2.5 x 10(-4) mol/L. The interaction of this hydrophobic peptide with DPPC vesicles has been studied using fluorescence techniques. Its influence on the microviscosity of bilayers was determined by studying polarization/temperature dependence for ANS and diphenyl hexatriene (DPH) fluorescent probes. With both markers the presence of peptide promotes a clear increase in anisotropy values. This indicates a rigidifying effect. Leakage studies carried out with liposomes loaded with carboxyfluorescein (CF) indicate a stabilizing effect of the peptide on bilayers, in agreement with results obtained with fluorescent probes.

Influence of the saturation chain and head group charge of phospholipids in the interaction of hepatitis G virus synthetic peptides.

Using the Langmuir technique, we have studied the properties at the air/water interface and the interaction of the hepatitis G virus synthetic peptide E1(53-66) and its palmitoyl derivative with membrane phospholipids. These phospholipids had different characteristics referring to the net charge and saturation of the acyl chain. The palmitoyl derivative was more stable at the air/water interface and in the kinetic at constant area measurements showed higher incorporation to the monolayer. The interaction was higher for saturated phospholipids and those with a negative net charge. When the peptides were in the subphase, they produced changes in the miscibility of mixed monolayers composed of DPPC/DPPG or DOPC/DOPG. It can be deduced from the results obtained that electrostatic interactions play a major role, but when the peptide is derivatized with the palmitoyl chain, hydrophobic interactions are added to the former ones. The interaction is also influenced by the saturation of the acyl chain.

Study in mono and bilayers of the interaction of hepatitis G virus (GBV-C/HGV) synthetic antigen E2(99-118) with cell membrane phospholipids.

The interaction of the hepatitis G synthetic peptide E2(99-118) with cell membrane phospholipids of different characteristics such as dipalmitoylphosphatidylcholine (DPPC) and dipalmitoylphosphatidylglycerol (DPPG) was studied by Langmuir isotherms. Epifluorescence microscopy and Atomic force microscopy (AFM) was also used to study interactions with DPPC. Compression isotherms of DPPC/E2(99-118) and DPPG/E2(99-118) mixed monolayers showed negative deviation from ideallity consistent with the existence of attractive interactions. The incorporation of the peptide in DPPC monolayer was also confirmed in epifluorescence microscopy and AFM studies. The peptide retarded the formation of DPPC domains and did not let the phospholipid get organized. No important differences in the interactions with DPPC (neutral) or DPPG (anionic) were found, thus suggesting that electrostatics forces do not have a predominant influence in these interactions.

Physicochemical characterization of branched chain polymeric polypeptide carriers based on a poly-lysine backbone.

A systematic study is reported on the physicochemical characteristics of two branched chain polymers (based on a poly-L-lysine backbone) with a general formula poly[Lys-(DL-Alam-Xi)], where X = Orn (OAK) or N-acetyl-Glu (Ac-EAK) and m approximately equal to 3, using surface pressure and fluorescence polarization methods. These data are compared with those of the linear poly(L-Lys) from which OAK and Ac-EAK are derived. These two polymers show a moderate surface activity, able to form stable monomolecular layers at the air-water interface. Poly(L-Lys), the most hydrophilic, has the lowest surface activity. The interaction of these polymers with phospholipid bilayers either neutral or negatively charged was studied with vesicles labeled with two fluorescent probes: ANS and DPH. Results indicate that these polymers are able to accommodate in their internal structure, mainly through electrostatic interactions, a certain amount of ANS marker molecules, but fluorescence increases of the ANS-polypeptide complexes were so low that its influence in further polarization measurements could be discarded. After interaction with liposomes, these polymers induce an increase in the polarization of the probes, thus indicating a rigidification of the bilayers. Electrostatic forces seem to be very important in this interaction; cationic polymers are clearly more active, with PG-containing liposomes, than Ac-EAK. Moreover, in these assays poly(L-Lys) behaves as the more active compound. This fact is probably due to its major ability to form alpha-helical structures that could insert easily in the bilayers. These results indicate that the polymeric structures studied can be used as carriers for biologically active molecules, because their interactions with bilayers remain soft and have a positive effect on the stability of the membranes.

Synthesis and physicochemical study of the laminin active sequence: SIKVAV.

The synthesis, physicochemical characterization, and interaction with membrane model systems of a peptide derived from the PA22-2 region of laminin are described. Surface activity studies indicate that this peptide is able to spread at the air-water interface being the maximal spreading pressure 20 mN/m at subphase concentrations around 10 micro M. Besides, these peptide molecules are also able to form stable monolayers. Physicochemical studies concerning the interaction of this peptide with lipids, organized in mono and bilayers, were carried out using Langmuir balance experiments and polarization fluorescence techniques. The peptide penetrates better in monolayers of DPPC than in those of PC and forms condensed mixed monolayers with DPPC. Energies of mixing are small thus indicating that deviations from ideality were almost negligible. Interactions with bilayers were studied through microviscosity changes (DPH and TMA-DPH probes), membrane permeability alterations (CF, NBD-PE/dithionite), and fusion promotion (NBD-PE/Rh-PE, resonance energy transfer). Results indicate that this sequence interacts very softly with bilayers without promoting changes in their organization. These data as well as the lack of interaction with erythrocytes suggest that coating liposomes with this peptide through chemical amide bonds can render stable inmunoliposomes for further biological applications.

Lipophilic derivatization of synthetic peptides belonging to NS3 and E2 proteins of GB virus-C (hepatitis G virus) and its effect on the interaction with model lipid membranes.

The synthesis by solid-phase methodologies of peptides belonging to structural and non-structural proteins of GB virus C as well as its N-alpha-acylation with myristate and palmitate fatty acids is described. To explore the peptide-lipid interactions we have used liposomes composed of dipalmitoylphosphatidylcholine as model membranes and complementary spectroscopic and calorimetric techniques. Our results show that structural and more clearly the structural lipophilic peptide sequences incorporated into lipid bilayers perturb the packing of lipids and affect their thermotropic properties, more than the non-structural selected sequence. However, the binding of the synthetic sequences to lipid membranes occurred without any restructuration of the peptides.

Influence of polymyxins on the structural dynamics of Escherichia coli lipid membranes.

Polymyxins are a family of nonribosomic cationic peptide antibiotics highly effective against Gram-negative bacteria. Two members of this family, Polymyxins B and E (PxB, PxE), form molecular vesicle-vesicle contacts and promote a selective exchange of phospholipids at very low concentrations in the membrane, a biophysical phenomenon that can be the basis of their antibiotic mode of action. To get more insight into the interaction of these antibiotics with the lipid membrane, their effect on the structural dynamics of bilayers prepared with lipids extracted from the membrane of Escherichia coli was determined using fluorescently labeled phopholipids. Steady-state anisotropy measurements with probes that localize at different positions in the membrane give information on the effects of polymyxins on the mobility of the phospholipids. Results with PxB, PxE, colymycin M and polymyxin B nonapeptide (PxB-NP), a deacylated derivative with no antibiotic properties, are compared. At low peptide concentrations (<2 mol%) PxB and PxE bind to the membranes superficially, affecting very slightly the ordering of the lipids at the outermost part of the bilayer. Above this concentration, PxB and PxE insert more deeply in the bilayer, increasing lipid order both in the gel and liquid-crystal states and modifying phase transitions. Fluorescence experiments with pyrene labeled phospholipids indicate that the increase in lipid packing is accompanied by an enrichment of phospholipids in the bilayers. In contrast, colymycin M and PxB-NP did not modify lipid packing or phase transition, nor did they induce microdomain formation. The possible significance of these results in the antibiotic mode of action of PxB and PxE is discussed. The combination of spectroscopic techniques described here can be useful as part of a general method of screening for new antibiotics that act on the membrane by the same mechanism as polymyxins.

Spectroscopic analysis of the interaction of a peptide sequence of Hepatitis G virus with bilayers.

Merocyanine 540 (MC540) has been used as external probe to determine the interaction of the peptide sequence 125-139 corresponding to the E2 protein of Hepatitis G virus, with lipid bilayers. The probe was incorporated into large unilamellar vesicles (LUVs) or small unilamellar vesicles (SUVs) of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC). When incorporated into bilayers, MC540 shows two absorption maxima corresponding to the monomer (570 nm) and dimer (530 nm) form of the probe. Changes in the probe microenvironment are reflected by a modification in the position and/or intensity of these maxima. Addition of increasing amounts of peptide resulted in a slight decrease of the ratio A570/A530 thus indicating a change in MC540 partition into the membrane, going from a hydrophobic to a more hydrophilic environment. This effect was concomitant with an increase in dimer formation as stated from the values of the apparent dimerization constant (K(app)) obtained. Fluorescence spectra as well as steady state anisotropy measurements were in agreement with the above results indicating that the peptide was able to relocate the probe and displacing MC540 from its initial location into the bilayer. Results with SUVs or LUVs were similar for what curvature does not seem to play any role on peptide activity. These results reflect the ability of peptide to interact with biomimetic membranes in the lipid head group region.

Membrane fusion induced by a lipopeptidic epitope from VP3 capside protein of hepatitis A virus.

Palmitoyl-VP3(110--121) (PVP3) is a synthetic lipopeptide derivative of a continuous epitope from the VP3 capsid protein of hepatitis A virus, and it is highly immunogenic in vivo. We have investigated the interaction of PVP3 with lipid model membranes of varying surface charge. Binding of PVP3 to anionic vesicles of PC/SM/PE/PS; (PC) 1-palmitoyl-2-oleoyl-phosphatidylcholine, (SM) sphingomyelin, (PE) 1,2-dipalmitoyl-phosphatidylethanolamine and (PS) L-alpha-phosphatidyl-L-serine, a composition that mimics the lipid component of natural membranes, was determined by tryptophan fluorescence and quenching experiments. In addition, and given the anionic net charge of the lipopeptide, binding to zwitterionic (PC/SM/PE) and cationic PC/SM/PE/DOTAP (DOTAP) 1,2-dioleoyl-3-trimethylammonium-propane mixtures was also determined. PVP3 binds to all three types of vesicles, but it adopts different forms depending on the electrical charge of the interface. This conclusion is supported by the insertion of PVP3 into lipid monolayers of the same charges spread at the air-water interface. The bound lipopeptide has membrane-destabilizing effects in all three vesicle compositions, as demonstrated by leakage of vesicle contents, whereas lipid mixing only occurs in cationic liposomes. Our results provide useful information for the design of a liposomal system that promotes a direct delivery of the membrane-incorporated immunogen to the immunocompetent cells, potentially increasing the immune response from the host.

Differences in secondary structure of HAV-synthetic peptides induced by the sequential order of T- and B-cell epitopes.

The present study was undertaken to examine the structural features of two peptide constructs designed on the basis of linear combination of B and T-cell epitopes in different orientations (BT and TB) that may be important to explain the differences in the elicited antihepatitis A virus immune response and in the interaction with biological model membranes. A CD study was carried out and the corresponding quantitative analysis of the experimental data was done using deconvolution computer programs. Moreover, fluorescence experiments were performed to analyze differences in the fluorescence emission spectra of both molecules. The main conformational difference by CD studies was obtained working in aqueous medium. Although the TB sequence adopted a preferably random coil structure, the BT peptide was best fitted with beta-type structures. These results are further supported by fluorescence studies. These findings have relevance for the design of synthetic immunopeptides.

Membrane fusion by an RGD-containing sequence from the core protein VP3 of hepatitis A virus and the RGA-analogue: implications for viral infection.

The interaction of an RGD-containing epitope from the hepatitis A virus VP3 capsid protein and its RGA-analogue with lipid membranes was studied by biophysical methods. Two types of model membrane were used: vesicles and monolayers spread at the air/water interface, with a composition that closely resembles the lipid moiety of hepatocyte membranes: PC/SM/PE/PC (40:33:12:15; PC: 1-palmitoyl-2-oleoylglycero-sn-3-phosphocholine; SM: sphingomyelin from chicken egg yolk; PE, 1,2-dipalmitoyl-phosphatidylethanolamine; PS: L-alpha-phosphatidyl-L-serine from bovine brain). In addition, zwitterionic PC/SM/PE (47:39:14) and cationic PC/SM/PE/DOTAP (40:33:12:15; DOTAP: 1,2-dioleoyl-3-trimethylammonium-propane) membranes were also prepared in order to dissect the electrostatic and hydrophobic components in the interaction. Changes in tryptophan fluorescence, acrylamide quenching, and resonance energy transfer experiments in the presence of vesicles, as well as the kinetics of insertion in monolayers, indicate that both peptides bind to the three types of membrane at neutral and acidic pH; however, binding is irreversible only at low pH. Membrane-destabilizing and fusogenic activities are triggered by acidification at pH 4-6, characteristic of the endosome. Fluorescence experiments show that VP3-RGD and VP3-RGA induce mixing of lipids and leakage or mixing of aqueous contents in anionic and cationic vesicles at pH 4-6, indicating leaky fusion. Interaction with zwitterionic vesicles (PC/SM/PE) results in leakage without lipid mixing, indicating pore formation. Replacement of aspartic acid in the RGD motif by alanine maintains the membrane-destabilizing properties of the peptide at low pH, but not its antigenicity. Since the RGD tripeptide is related to receptor-mediated cell adhesion and antigenicity, results suggest that receptor binding is not a molecular requirement for fusion. The possible involvement of peptide-induced membrane destabilization in the mechanism of hepatitis A virus infection of hepatocytes by the endosomal route is discussed.

Synthesis of rgd containing peptides. Comparative study of their incorporation to the surface of 5-fluoruridine loaded liposomes.

The synthesis on solid phase of a peptide sequence (GGRGRS) related to an integrin adhesion site as well as the preparation of some hydrophobic derivatives is described. The incorporation of these peptides to the surface of liposomes was carried out either through the NGPE (N-glutaryl dipalmitoyl phosphatidyl choline) carboxyl-group or mixing hydrophobic peptide derivatives with lipids since the beginning of the process. The influence of these factors on the entrapment yield of 5-FUR (5-fluorouridine) was determined. Best results, calculated as percentage of drug encapsulation, were obtained when the peptide was linked to preformed liposomes via an NGPE-amide bond. On the contrary, the presence of these hydrophobic peptides on the bilayers decreases the overall yield of encapsulation of 5-FUR. Nevertheless, considering drug/lipid relationship and scaling-up requirements it seems that the use of myristoyl peptide derivative should be the procedure of choice. Physicochemical studies carried out with the peptides indicated that the presence of hydrophobic moieties linked to the parent peptide increases the tendency to self aggregation as detected through fluorescence studies using DPH (1, 6 diphenyl hexatriene) as marker, reducing in this way the efficiency of incorporation of hydrophobic peptides to the surface of liposomes.