An Investigation of Heavy Metal Concentrations in the Sera of Cattle Grazed in Different Locations in the Kars Province of Türkiye.

The aim of this study was to investigate the effects of exposure of cattle to low levels of environmental pollution on trace metal metabolism. The assessment of heavy metal concentrations in blood samples is essential to evaluate the potential effects of pollutants on cattle production and to measure the uptake of pollutants by animals. For this purpose, cattle raised in villages at varying distances to the center of the Kars province were sampled for blood, and heavy metal concentrations were measured in the extracted sera. In total 150 blood samples were collected from 4-to 5-year-old cattle from 15 regions. Sera were extracted from the blood samples from the selected foci and analyzed with an inductively coupled plasma-optical emission spectrometry (ICP-OES) device for essential (Co, Cr, Cu, Fe, Mn, Ni and Zn, Se, V) and non-essential (Pb, Cd and Hg, As, Al, Sn) heavy metals. Heavy metals were detected in the serum samples in the following order: Sn > Fe > Al > Zn > Cu > Pb > Cr > As > V > Ni > Mn > Hg. A confidence interval of 95% was used to evaluate all tests. Differences between the villages were insignificant for the Cu, Pb, Cd, Hg, Se, Al, Co concentrations (p > 0.05), whereas differences between the villages were significant for the Fe, As, Ni, Mn (p < 0.05), Zn, Cr (p < 0.01), V and Sn (p < 0.001) concentrations. The results of this study show that heavy metals detected in bovine sera from the sampling area do not exceed the maximum permissible limits, suggesting limited exposure to heavy metals and no associated health risk to animals in the region.

Concentration of essential and non-essential elements and carcinogenic / non-carcinogenic health risk assessment of commercial bee pollens from Turkey.

BACKGROUND: Bee pollen, known as a natural super-food with valuable nutritional ingredients, is regarded as a good indicator of ecotoxic substances, such as potentially toxic elements (PTEs). Therefore, this study aims to examine the concentrations of selected PTEs (Al, As, Ba, Cd, Co, Cr, Cu, Fe, Hg, Mg, Mn, Mo, Ni, Pb, Se, Sn, Sr, V, Zn) in bee pollen purchased from online markets in Turkey and perform a health risk assessment to identify the potential risk to consumers. METHODS: The quantitative analyses were conducted by inductively coupled plasma optical emission spectrometry (ICP-OES). RESULTS: The mean values of essential PTEs in decreasing content order were Mg > Fe > Zn > Mn > Cu > Ni > Se > Cr > Mo >Co = V. Regarding the results of the study, daily consumption (40 g for adult or 20 g for children) of commercial bee pollen can recompense 20-35 % of daily Cu, Mn, Se requirements for children, adults, pregnant, and breastfeeding women. The decreasing content order of non-essential elements was Al > Sn > Sr > Ba > Pb > As. Cadmium and Hg concentrations were below the detection limits in all the samples. In terms of food and public health; detection of the PTEs concentrations is necessary to assess the quality and safety of bee pollen before consumption. According to the carcinogenic and non-carcinogenic risk assessments; commercial pollen consumption does not pose a health risk to either children or adults for the PTEs monitored in this study. CONCLUSION: We conclude that bee pollen is an ideal indicator for the monitoring of environmental pollution of PTEs and also a valuable source of essential elements. This study highlights the need to develop standards that regulate acceptable concentrations of PTEs.

Effects of clinoptilolite on heavy metal levels in milk, proinflammatory cytokine responses (IL-1ß and IL-6) and oxidative stress in dairy cows.

The effects of clinoptilolite on milk copper (Cu), lead (Pb), zinc (Zn), cadmium (Cd) and iron (Fe) concentrations, proinflammatory cytokine responses, oxidative stress status, whole blood cell counts and liver and kidney functions were investigated in dairy cows exhibiting no signs of any kind of toxicity. Clinoptilolite was added to the feed at a dose of 200 mg kg-1 body weight in the clinoptilolite-treated group (n = 14), but was not added to the feed in the control group (n = 7). In the milk samples (n = 21) collected before the experiment, the Cu, Pb, Zn, Cd and Fe values were 0.021 ± 0.020, 0.104 ± 0.01, 3.42 ± 0.32, <0.000, 0.56 ± 0.34 ppm, respectively. At the end of the experiment (30th day), among the elements measured in milk samples collected from the clinoptilolite-treated group, only the Pb value (0.076 ± 0.01) was lower than the 0-day value of the clinoptilolite-treated group (0.104 ± 0.01) and the 30th-day value of the control group (0.105 ± 0.01) was found to be statistically lower. Changes determined at the end of clinoptilolite application in serum superoxide dismutase (SOD), malondialdehyde (MDA), albumin, glucose, urea and urine creatinine/urine total protein (uCr/uTP) values, which were interpreted as the effect of lead exposure before the trial, were evaluated as the positive effect of clinoptilolite. It was concluded that the addition of clinoptilolite to the feed in dairy cows caused a significant decrease in the amount of Pb in milk, and positive changes in the parameters related to oxidative stress in serum and in parameters related to renal function.

Investigation on phenol degradation capability of Scenedesmus regularis: influence of process parameters.

Phenol removal from environmental solutions has attracted much attention due to phenol's high toxicity, even at low concentrations. This study aims to reveal the phenol biodegradation capacity of Scenedesmus regularis. Batch system parameters (pH, amount of algal cell, phenol concentration) on biodegradation were examined. After 24 h of treatment, 92.16, 94.50, 96.20, 80.53, 65.32, 52 and 40% of phenol were removed by Scenedesmus regularis in aqueous solutions containing 5, 10, 15, 20, 30, 40 and 50 mg/L of phenol, respectively. To describe the correlation between degradation rate and phenol concentration, the Michaelis-Menten kinetic equation was used where Vmax and Km are 0.82 mg phenol g algea-1 h-1 and 24.97 ppm, respectively. Phenol remediation ability of S.regularis can enable the usage of the spent biomass as biofuel feedstock and animal feed makes it a 'green' environmental sustainable process.

Investigation of some metals in honey samples from West Mediterranean region of Turkey.

Analysis of elements content in honey is important for honey quality and safety and for monitoring of environmental pollution. The levels of 22 elements, aluminum (Al), barium (Ba), calcium (Ca), cadmium (Cd), chromium (Cr), cobalt (Co), iron (Fe), copper (Cu), potassium (K), magnesium (Mg), manganese (Mn), nickel (Ni), sodium (Na), lead (Pb), strontium (Sr), silver (Ag), bismuth (Bi), gallium (Ga), indium (In), lithium (Li), thallium (Tl) and zinc (Zn), were determined in 70 samples obtained from beekeepers located in the West Mediterranean region of Turkey. Determination of elements content was carried out using ICP-OES. Chromium, Co, Cd, Ag, Bi, In and Tl were not detected in any of the tested honey samples. The most abundant metal was K which has an overall average of 764.26 mg kg-1. Higher concentrations of Pb, Ni, Mg, Na, K and Mn were found in the samples obtained from Burdur compared to other provinces. The levels of Cu were statistically lower in Antalya in comparison to other regions. No significant differences were observed in Al, Zn, Fe, Sr, Ba, Ca and Ga levels between regions. The differences in the chemistry of honey samples collected from different regions may be due to geochemical soil composition and geographical differences. Their levels were below to the European limits and the honeys are safe for human consumption.

Investigation of Heavy Metal Levels in Blood Samples of Three Cattle Breeds in Turkey.

The aim of this study is to determine seasonal changes in the blood levels of some heavy metals in three Turkey-specific cattle breed: Native Land (NL), Grizzle Race (GR), and South Anatolian Red (SR). Blood samples were collected in summer and winter seasons from a total of 180 cattle aged 12-24 months. The levels of the essential (Zn, Cu, Fe, Co etc.) and non-essential (Cd, Hg, As, Cr, Pb, etc.) heavy metals were analyzed. All heavy metal levels, except that of Co, were significantly higher (p < 0.05) in SR in both seasons compared to the other species. In all breeds, Fe and Co levels were statistically higher (p < 0.05) in the summer season while Mn level was higher (p < 0.05) in the winter season. The levels of all metals analyzed are within the internationally acceptable limits for cattle breeds.

Elimination of carcinogenic bromate ions from aqueous environment with 4-vinyl pyridine-g-poly(ethylene terephthalate) fibers.

In this study, poly(ethylene terephthalate) fibers grafted with 4-vinyl pyridine (PET-g-4VP) was synthesized with using a radical polymerization method and its removal capacity for bromate ions in the aqueous solution was explored. The synthesized graft copolymer was structurally characterized by scanning electron microscopy (SEM) and Fourier transformed infrared spectroscopy (FTIR). The effect of some parameters such as pH, grafting rate, processing time, and ion concentration on bromate removal was examined with batch experiments. The sorptions of bromate onto the PET-g-4VP fibers were both verified with FTIR and X-ray fluorescence analysis (XRF) and the remaining amount of bromate after adsorption process was determined with an ion chromatography (Shimadzu). Moreover, kinetic and isotherm studies were also performed for adsorption of bromate with the grafted fibers. The point of zero charge (pHpzc) of the PET-g-4VP fibers was found to be 7.5 and the fibers removed maximum amount of bromate from aqueous solution at pH 3. Equilibrium time of adsorption was determined to be 75 min and the adsorption kinetic was found to be pseudo-second-order model. It was observed that the increase in the amount of grafted 4VP onto the PET fibers increased the bromate removal capacity of the fibers; however, when the grafting yield of 4VP was over 80%, the bromate removal ability of the fibers decreased. The maximum bromate removal capacity of the PET-g-4VP was determined to be 183 mg/g when the initial bromate amount was 800 mg/L, treatment time was 75 min, pH of the solution was 3, and 4VP grafting yield was 80%. When the initial bromate concentration was higher than 800 mg/L, the removal rate of the PET-g-4VP fibers was not changed. In addition, bromate ion adsorption data indicated compliance with the Freundlich isotherm. The adsorbent fibers obtained by this study may be promising candidates for the removal of bromate ions from the aqueous media.