Synthesis and Evaluation of a Chitosan-Silica-Based Bone Substitute for Tissue Engineering.

Bone defects have prompted the development of biomaterial-based bone substitutes for restoring the affected tissue completely. Although many biomaterials have been designed and evaluated, the combination of properties required in a biomaterial for bone tissue engineering still poses a challenge. In this study, a chitosan-silica-based biocomposite was synthetized, and its physicochemical characteristics and biocompatibility were characterized, with the aim of exploring the advantages and drawbacks of its use in bone tissue engineering. Dynamic light scattering measurements showed that the mean hydrodynamic size of solid silica particles (Sol-Si) was 482 ± 3 nm. Scanning electron microscopy of the biocomposite showed that Sol-Si were homogenously distributed within the chitosan (CS) matrix. The biocomposite swelled rapidly and was observed to have no cytotoxic effect on the [3T3] cell line within 24 h. Biocompatibility was also analyzed in vivo 14 days post-implant using a murine experimental model (Wistar rats). The biocomposite was implanted in the medullary compartment of both tibiae (n = 12). Histologically, no acute inflammatory infiltrate or multinucleated giant cells associated to the biocomposite were observed, indicating good biocompatibility. At the tissue-biocomposite interface, there was new formation of woven bone tissue in close contact with the biocomposite surface (osseointegration). The new bone formation may be attributed to the action of silica. Free silica particles originating from the biocomposite were observed at the tissue-biocomposite interface. According to our results, the biocomposite may act as a template for cellular interactions and extracellular matrix formation, providing a structural support for new bone tissue formation. The CS/Sol-Si biocomposite may act as a Si reservoir, promoting new bone formation. A scaffold with these properties is essential for cell differentiation and filling a bone defect.

Recent Advances in Synthetic and Natural Biomaterials-Based Therapy for Bone Defects.

Synthetic and natural biomaterials are a promising alternative for the treatment of critical-sized bone defects. Several parameters such as their porosity, surface, and mechanical properties are extensively pointed out as key points to recapitulate the bone microenvironment. Many biomaterials with this pursuit are employed to provide a matrix, which can supply the specific environment and architecture for an adequate bone growth. Nevertheless, some queries remain unanswered. This review discusses the recent advances achieved by some synthetic and natural biomaterials to mimic the native structure of bone and the manufacturing technology applied to obtain biomaterial candidates. The focus of this review is placed in the recent advances in the development of biomaterial-based therapy for bone defects in different types of bone. In this context, this review gives an overview of the potentialities of synthetic and natural biomaterials: polyurethanes, polyesters, hyaluronic acid, collagen, titanium, and silica as successful candidates for the treatment of bone defects.

Stimuli-Responsive Materials for Tissue Engineering and Drug Delivery.

Smart or stimuli-responsive materials are an emerging class of materials used for tissue engineering and drug delivery. A variety of stimuli (including temperature, pH, redox-state, light, and magnet fields) are being investigated for their potential to change a material's properties, interactions, structure, and/or dimensions. The specificity of stimuli response, and ability to respond to endogenous cues inherently present in living systems provide possibilities to develop novel tissue engineering and drug delivery strategies (for example materials composed of stimuli responsive polymers that self-assemble or undergo phase transitions or morphology transformations). Herein, smart materials as controlled drug release vehicles for tissue engineering are described, highlighting their potential for the delivery of precise quantities of drugs at specific locations and times promoting the controlled repair or remodeling of tissues.

Dodecenylsuccinic anhydride modified collagen hydrogels loaded with simvastatin as skin wound dressings.

Skin wound healing presents a unique challenge because of its complex healing process. Herein, we developed a hydrophobic wound dressing to incorporate simvastatin, which has potential application in the treatment of ulcers and prevention of wound infection. For that matter, collagen hydrogels were grafted with dodecenylsuccinic anhydride (DDSA). The chemical modification was confirmed by FTIR and solid state 13 C-NMR spectroscopies while the ultrastructure was observed by scanning electron microscope (SEM) images. In contact angle measurements, a higher water droplet angle in DDSA-collagen gels was observed. This was consistent with the swelling assay, in which water absorption was 5.2 g/g for collagen and 1.9 g/g for DDSA-collagen. Additionally, viability and adhesion studies were performed. Cell adhesion decreased ~11% in DDSA-collagen and the number of viable cells showed a tendency to decrease as DDSA concentration increased but it was only significantly lower above concentrations of 12%. Modified gels were loaded with simvastatin showing higher adsorption capacity and lower release. Lastly, the antimicrobial and anti-inflammatory activity of DDSA-collagen materials were assessed. DDSA-collagen hydrogels, either unloaded or loaded with simvastatin showed sustained antimicrobial activity against Pseudomonas aeruginosa and Staphylococcus aureus for 72 hr probably due to the hydrophobic interaction of DDSA chains with bacterial cell walls. The antimicrobial activity was stronger against S. aureus. Collagen hydrogels also presented a prolonged antibacterial activity when they were loaded with simvastatin, confirming the antimicrobial properties of statins. Finally, it was observed that these materials can stimulate resident macrophages and promote an M2 profile which is desirable in wound healing processes.

Collagen-silica nanocomposites as dermal dressings preventing infection in vivo.

The controlled delivery of multiple drugs from biomaterials is a timely challenge. In particular the nanocomposite approach offers a unique opportunity to combine the scaffold-forming ability and biocompatibility of hydrogels with the versatile and tunable drug release properties of micro- or nano-carriers. Here, we show that collagen-silica nanocomposites allowing for the prolonged release of two topical antibiotics are promising medicated dressings to prevent infection in wounds. For this purpose, core-shell silica particles loaded with gentamicin sulfate and sodium rifamycin were combined with concentrated collagen type I hydrogels. A dense fibrillar network of collagen exhibiting its typical periodic banding pattern and a homogenous particle distribution were observed by scanning electron microscopy. Antibiotics release from nanocomposites allowed a sustained antibacterial effect against Staphylococcus aureus over 10 days in vitro. The acute dermal irritation test performed on albino rabbit skin showed no sign of severe inflammation. The antibacterial efficiency of nanocomposites was evaluated in vivo in a model of cutaneous infection, showing a 2 log steps decrease in bacterial population when loaded systems were used. In parallel, the histological examination indicated the absence of M1 inflammatory macrophages in the wound bed after treatment. Taken together, these results illustrate the potentialities of the nanocomposite approach to develop collagen-based biomaterials with controlled dual drug delivery to prevent infection and promote cutaneous wound repair.

Innovative Immobilization Matrices.

We present a brief survey of some of the recent work of Professor Luis E. Díaz, performed together with his students and collaborators at the University of Buenos Aires. Dr Luis E. Díaz has been involved in research on biochemical and pharmaceutical sciences solving scientific and industry problems for over 40 years until he passed away. Prof. Díaz scientific interests included various topics from NMR spectroscopy to biomedicine but fundamentally he focused in various aspects of chemistry (analytical, organic, inorganic and environmental). This is not a complete survey but a sampling of prominent projects related to sol-gel chemistry with a focus on some of his recent publications.

Silica core-shell particles for the dual delivery of gentamicin and rifamycin antibiotics.

Increasing bacterial resistance calls for the simultaneous delivery of multiple antibiotics. One strategy is to design a unique pharmaceutical carrier that is able to incorporate several drugs with different physico-chemical properties. This is highly challenging as it may require the development of compartmentalization approaches. Here we have prepared core-shell silica particles allowing for the dual delivery of gentamicin and rifamycin. The effect of silica particle surface functionalization on antibiotic sorption was first studied, enlightening the role of electrostatic and hydrophobic interactions. This in turn dictates the chemical conditions for shell deposition and further sorption of these antibiotics. In particular, the silica shell deposition was favored by the positively charged layer of gentamicin coating on the core particle surface. Shell modification by thiol groups finally allowed for rifamycin sorption. The antibacterial activity of the core-shell particles against Staphylococcus aureus and Pseudomonas aeruginosa demonstrated the dual release and action of the two antibiotics.

Synthesis and characterization of ibandronate-loaded silica nanoparticles and collagen nanocomposites.

Non-porous bare silica nanoparticles, amine modified silica nanoparticles and mesoporous particles, were evaluated as carriers for sodium ibandronate. The synthesized nanoparticles were characterized by SEM, TEM, DLS and porosity. Then, their capacity to incorporate a bisphosphonate drug (sodium ibandronate) and the in vitro release behavior was analyzed by capillary electrophoresis. Mesoporous and amine-modified particles showed higher levels of drug incorporation, 44.68 mg g(-1) and 28.90 mg g(-1), respectively. The release kinetics from the two types of particles was similar following a first order kinetics. However, when these particles were included into collagen hydrogels only mesoporous nanoparticles had a sustained release for over 10 days. The biocompatibility of mesoporous particles towards Saos-2 cells was also evaluated by the MTT assay observing an increase in cell viability for concentrations lower than 0.6 mg ml(-1) of particles and a decrease for concentrations over 1.2 mg ml(-1). Furthermore, when these particles were incubated with mesenchymal cells it was observed that they had the capacity to promote the differentiation of the cells with a significant increase in the alkaline phosphatase activity.

Sol-gel encapsulation of biomolecules and cells for medicinal applications.

The sol-gel process provides a robust and versatile technology for the immobilization of biologicals. A wide range of inorganic, composites and hybrid materials can be prepared to encapsulate molecular drugs, proteins, antibodies/antigens, enzymes, nucleic acids, prokaryotic and eukaryotic cells into bulk gels, particles and films. This review describes the applications of sol-gel encapsulation relevant to medicinal chemistry focusing on the recent development of biosensors as well as systems for production, screening and delivery of bioactive compounds and biomaterials.

Development of sol-gel hybrid materials for whole cell immobilization.

The development of a good biocompatible matrix for immobilization of cells is very crucial for improving the performance of functional biohybrids. The synthesis of solid inorganic materials from alkoxide, aqueous and polyol-modified silanes routes, as well as the incorporation of organic polymers, are further areas being developed to improve the viability of encapsulated cells. This emerging field of material science has generated considerable and increasing interest during the past decade. Recent advances in the field involving biomaterials, biohybrids, and functional nanomaterials provided novel materials, which have gained the attention of the scientific community, Governments and industrial companies. Overall, this review is intended to give an overview on the current state of the art of the patents associated to the immobilization of whole living cells in sol-gel derived hybrid materials and to describe the major challenges to be addressed in the forthcoming years.

Effect of various parameters on viability and growth of bacteria immobilized in sol-gel-derived silica matrices.

Immobilized bacteria are being extensively used for metabolite production, biocatalysts, and biosensor construction. However, long-term viability and metabolic activity of entrapped bacteria is affected by several conditions such as their physiological state, the presence of high-osmolarity environments, porous structure and shrinkage of the matrix. The aim of this work was to evaluate the effect of various parameters on bacteria immobilized in sol-gel-derived silica matrices. With this purpose, we evaluated the stress of immobilization over bacteria cultures obtained from different growing states, the effect of cell density and bacteria capability to proliferate inside matrices. Best results to attain longer preservation times were obtained when we immobilized suspensions with an optimized bacterial number of 1 x 10(7) cfu/gel in the presence of LB medium using aqueous silica precursors. Furthermore, the impact of osmotic stress with the subsequent intracellular trehalose accumulation and the addition of osmolites were investigated. Shorter preservation times were found for bacteria immobilized in the presence of osmolites while trehalose accumulation in stressed cells did not produce changes on entrapped bacteria viability. Finally, nutrient addition in silica matrices was studied indicating that the presence of a carbon source without the simultaneous addition of nitrogen was detrimental for immobilized E. coli. However, when both carbon and nitrogen sources were present, bacteria were able to survive longer periods of time.

Immobilization of bacteria in silica matrices using citric acid in the sol-gel process.

The aim of this work was to use citric acid in the sol-gel process to generate an inorganic polymer that allows bacterial survival for long periods of time and to study the influence of different storage temperatures. We compared gram-negative Escherichia coli and gram-positive Staphylococcus aureus, immobilized and preserved at different storage temperatures in silica matrices prepared by the method proposed. Immobilized E. coli and S. aureus in silica matrices were stored in sealed tubes at 20, 4, -20, and -70 degrees C for 4 months during which the number of viable cells was analyzed. Results show that the immobilization in silica matrices using citric acid, to neutralize the alkalinity of the silica precursors, makes the technique not only biocompatible but also easier to perform since polymerization does not occur immediately as it does when hydrochloric acid is utilized.