Gamma radiation effect on the chemical, mechanical and thermal properties of PCL/MCM-48-PVA nanocomposite films.

In this work, poly (vinyl alcohol) (PVA) was employed to produce a Mesoporous Composition of Matter-48 Modified (MCM-48-M or MCM-48-PVA). After surface modification, MCM-48-M was used to produce nanocomposite (NC) films with polycaprolactone (PCL) as a matrix at room temperature. PCL and MCM-48 nanoparticles (NPs) were chosen due to their great biocompatibility and low toxicity. However, MCM-48-M is more compatible with PCL than MCM-48. NC films were sterilized by gamma radiation with a dose of 25 kGy and characterized by experimental techniques to investigate their chemical, mechanical (tensile) and thermal properties. Scanning electron microscopy (SEM) and transmission electronic microscopy (TEM) results indicated that MCM-48-M exhibited a random distribution in the PCL matrix. The PCL chemical structure was preserved in NC films as described by Fourier transform infrared (FT-IR) spectroscopy as well as the tensile and thermal properties of NC films. FT-IR and thermogravimetric analysis (TGA) results showed surface modification. X-ray diffraction (XRD) and differential scanning calorimetry (DSC) showed that crystalline symmetries were preserved and the crystallinity of NC films had small variations in all samples before and after irradiation, respectively. But, our results did not indicate major changes showing that this method is successful for the sterilization of PCL/MCM-48-PVA NC films.

Synthesis and photothermal performance of non-stoichiometric molybdenum oxide (MoO3-x) prepared by gamma radiation.

This work reports the interaction of γ-rays with MoO3 in several solvents to obtain non-stoichiometric (sub-oxide) MoO3-x through a one-pot synthesis. The effect of different doses of γ-radiation (30-90 kGy) with different protic solvents (water, N,N-dimethylformamide and formic acid) was investigated. Structural modifications were characterized by X-ray diffractometry and scanning electron microscopy while optical properties were investigated by UV-Vis spectroscopy. The analysis of the highly intense (020), (040) and (060) diffraction peaks suggests that there is a reduction in water and formic acid allowing the formation of MoO3-x nanosheets. Additionally, the photothermal response of MoO3-x obtained under different conditions was characterized, and a possible mechanism to explain the interaction of γ-rays with solvents and the oxide structure by oxidative/reductive processes in the solution was proposed.

Lanthanide Contraction in Lanthanide Organic Frameworks: A Theoretical and Experimental Study.

In this work, the lanthanide (Ln) contraction phenomenon has been analyzed for three-dimensional structures in the solid state. We chose to study an isostructural series of lanthanide organic frameworks (LOFs) of formula [Ln2(C4H4O4)3(H2O)2]n·H2O and 14 crystallographic structures (except promethium complex). The analysis of Ln contraction was made by analyzing the sum of all Ln-O bond lengths and the sum of all O-O distances, for the oxygen atoms of the coordination polyhedra, calculated with different semiempirical quantum mechanical models. The ∑Ln-O and ∑O-O for this LOF can be fit to a second-order polynomial. Based on the crystallographic structures, it is concluded that the phenomenon of Ln contraction is observed. Our results also suggest that the semiempirical Sparkle/PM3 and Sparkle/RM1 models reproduce the Ln contraction phenomenon well, and similar fits were obtained for ∑Ln-O and ∑O-O bond lengths.

The new supramolecular nano-aggregate curcumin-cucurbit[7]uril: synthesis, photophysical properties and biocompatibility evaluation.

The supramolecular nano-aggregate CUR-CB[7] (CUR = curcumin and CB[7] = cucurbit[7]uril) was efficiently prepared by mixing CUR and CB[7] at a molar ratio of 1 : 1 in ethanol at room temperature. The supramolecular aggregate formation was evidenced by mainly FTIR, 1H NMR, DOSY and spectroscopy experiments. The supramolecular arrangement promotes the increase in the solubility and stability of CUR without affecting the biological properties of the A549 cells. The luminescence properties of CUR and CUR-CB[7] show anti-Kasha's rule fluorescence, and their remarkable NIR emission enables this material to be used as a luminescent probe and marker for in vivo tracking and structural integrity monitoring of the supramolecular complex.

Application of the Metal-Organic Framework [Eu(BTC)] as a Luminescent Marker for Gunshot Residues: A Synthesis, Characterization, and Toxicity Study.

The 3D metal-organic framework (MOF) [Eu(BTC)] (where BTC = trimesic acid) was synthesized in 20 min by a microwave-assisted hydrothermal method with a yield of 89%. A structural and spectroscopic study, performed by X-ray diffraction, thermogravimetry, and photoluminescence spectroscopy, showed that this framework has high crystallinity, thermal stability, and luminescence. This MOF had a red-orange luminescence when excited with ultraviolet (UV) radiation (λ = 254 nm) and a high potential for use as a luminescent marker for gunshot residues (GSR). When added to 9 mm nontoxic ammunition, it greatly improved quality of the crime scene investigation, allowing for direct visualization of the luminescent GSR on the shooter's hand and firearm and at the firing range using only a portable UV lamp. The marked luminescent GSR was easily collected and characterized by nondestructive techniques, including with a Video Spectral Comparator and scanning electron microscopy/energy-dispersive spectroscopy, wherein the presence of Eu3+ ions was confirmed. Furthermore, the oral acute toxicity of this MOF was assessed in adult female Wistar rats using the Organisation for Economic Cooperation and Development 423 guidelines. This study classified the MOF [Eu(BTC)] in a less toxic Globally Harmonized System category (category 5), with a LD50 (lethal dose) of 5000 mg/kg, ensuring a wide security range for its application.

A Green Approach for Allylations of Aldehydes and Ketones: Combining Allylborate, Mechanochemistry and Lanthanide Catalyst.

Secondary and tertiary alcohols synthesized via allylation of aldehydes and ketones are important compounds in bioactive natural products and industry, including pharmaceuticals. Development of a mechanochemical method using potassium allyltrifluoroborate salt and water, to successfully perform the allylation of aromatic and aliphatic carbonyl compounds is reported for the first time. By controlling the grinding parameters, the methodology can be selective, namely, very efficient for aldehydes and ineffective for ketones, but by employing lanthanide catalysts, the reactions with ketones can become practically quantitative. The catalyzed reactions can also be performed under mild aqueous stirring conditions. Considering the allylation agent and its by-products, aqueous media, energy efficiency and use of catalyst, the methodology meets most of the green chemistry principles.

A combined experimental and computational study of novel nanocage-based metal-organic frameworks for drug delivery.

Three new metal organic frameworks (MOFs) with chemical formulae [(CH3)2NH2] [Sm3(L1)2(HCOO)2(DMF)2(H2O)]·2DMF·18H2O (1), [Cu2(L2)(H2O)2]·2.22DMA (2) and [Zn2(L1)(DMA)]·1.75DMA were synthesized and structurally characterized. 1 and 2 show a classical NbO-like topology and have two types of interconnected cages. 3 exhibits an uncommon zzz topology and has two types of interconnected cages. These MOFs can adsorb large amounts of the drug 5-fluorouracil (5-FU) and release it in a progressive way. 5-FU was incorporated into desolvated 1, 2 and 3 with loadings of 0.40, 0.42, and 0.45 g g(-1), respectively. The drug release rates were 72%, 96% and 79% of the drug after 96 hours in 1, 120 hours in 2 and 96 hours in 3, respectively. Grand Canonical Monte Carlo (GCMC) simulations were performed to investigate the molecular interactions during 5-FU adsorption to the three novel materials. The GCMC simulations reproduced the experimental trend with respect to the drug loading capacity of each material. They also provided a structural description of drug packing within the frameworks, helping to explain the load capacity and controlled release characteristics of the materials. 5-FU binding preferences to 1, 2 and 3 reflect the diversity in pore types, chemistry and sizes. The calculated drug load is more related to the molecular properties of accessible volume Vacc than to the pore size.

CdTe quantum dots conjugated to concanavalin A as potential fluorescent molecular probes for saccharides detection in Candida albicans.

Semiconductor colloidal quantum dots (QDs) have been applied in biological analysis due to their unique optical properties and their versatility to be conjugated to biomolecules, such as lectins and antibodies, acquiring specificity to label a variety of targets. Concanavalin A (Con A) lectin binds specifically to α-d-mannose and α-d-glucose regions of saccharides that are usually expressed on membranes of mammalian cells and on cell walls of microbials. Candida albicans is the most common fungal opportunistic pathogen present in humans. Therefore, in this work, this fungus was chosen as a model for understanding cells and biofilm-forming organisms. Here, we report an efficient bioconjugation process to bind CdTe (Cadmium Telluride) QDs to Con A, and applied the bioconjugates to label saccharide structures on the cellular surface of C. albicans suspensions and biofilms. By accomplishing hemagglutination experiments and circular dichroism, we observed that the Con A structure and biochemical properties were preserved after the bioconjugation. Fluorescence microscopy images of yeasts and hyphae cells, as well as biofilms, incubated with QDs-(Con A) showed a bright orange fluorescence profile, indicating that the cell walls were specifically labeled. Furthermore, flow cytometry measurements confirmed that over 93% of the yeast cells were successfully labeled by QD-(Con A) complex. In contrast, non-conjugated QDs or QDs-(inhibited Con A) do not label any kind of biological system tested, indicating that the bioconjugation was specific and efficient. The staining pattern of the cells and biofilms demonstrate that QDs were effectively bioconjugated to Con A with specific labeling of saccharide-rich structures on C. albicans. Consequently, this work opens new possibilities to monitor glucose and mannose molecules through fluorescence techniques, which can help to optimize phototherapy protocols for this kind of fungus.

MOF@activated carbon: a new material for adsorption of aldicarb in biological systems.

A new composite was synthesized by the hydrothermal method using a 3D coordination network [Ln2(C4H4O4)3(H2O)2]·H2O (Ln = Eu and Tb) and activated carbon. The coordination network is formed within the pores of the charcoal, allowing for the use of this material as a detoxifying agent.

High photoluminescent metal-organic frameworks as optical markers for the identification of gunshot residues.

Gunshot residue (GSR) are solid particles produced when a firearm is discharged, and its detection is important evidence in forensic investigations. Currently, scanning electron microscopy coupled to energy dispersive spectroscopy (SEM-EDS) is the standard technique adopted for the analysis and identification of GSR; however, this methodology is inefficient for lead-free ammunition. Herein, we report the inclusion of high photoluminescent metal-organic frameworks in ammunition to allow for the visual detection of GSR. The tests indicated that marked GSR is easily visible in proportions above 5.0 wt %. A total of 1 g of marker suffices to tag 100 0.38 mm bullets or 62 0.40 mm bullets.

New homotrinuclear lanthanide complexes: synthesis, characterization and spectroscopic study.

This work presents the synthesis and spectroscopic study of new homotrinuclear (TRI) systems for photonics applications. The luminescence spectroscopy shows characteristics transitions of Eu(III) and Tb(III) ions. For the Gd(III) complexes, the triplets states were determined by phosphorescence measurement. The complexes' coordination geometries were calculated using the Sparkle/AM1 model. For the europium systems, the Sparkle/AM1 geometries were used to calculate all details involved in the energy transfer process, and the theoretical quantum yields were determined. From an energy diagram, that estimates triplet levels, it was possible to understand some experimental phenomenon, such as weak luminescence for precursor complex (without heterocyclics ligands), and ligands emission in terbium complexes. Some of these observations can also be explained by the Jablonski diagrams that describe, based on theoretical calculations, all luminescent process. The synthesized complexes showed high values of quantum yield in ethanolic environment: 50% for EuTRIDipy, 26% EuTRITerpy, and 56% for EuTRIPhen complexes.

1,4-Bis(2,2':6',2''-terpyridin-4'-yl)benzene.

The asymmetric unit of the title compound, C(36)H(24)N(6), comprises a whole mol-ecule. Supra-molecular inter-actions between neighbouring mol-ecules are essentially π-π stacking inter-actions with small inter-planar distances [3.5140 (15) and 3.6041 (15) Å]. The central phenyl-ene ring is tilted with respect to the two pyridine substituents, subtending angles of 36.17 (11) and 34.95 (11)°. Three of the peripheral pyridine substituents are almost coplanar with the central pyridines [dihedral angles = 5.10 (12)-8.21 (12)°], but one subtends an angle of 24.86 (12)°.

Two-dimensional coordination polymer matrix for solid-phase extraction of pesticide residues from plant Cordia salicifolia.

The 2D coordination polymer (infinity[Gd(DPA)(HDPA)]) was tested for extraction of acephate, chlorpropham, pirimicarb, bifenthrin, tetradifon, and phosalone from the medicinal plant Cordia salicifolia, whose extracts are commercialized in Brazil as diuretic, appetite suppressant, and weight loss products, using GC/MS, SIM. Considering that there are no Brazilian regulations concerning maximum permissible pesticide residue concentrations in medicinal herbs, recovery experiments were carried out (seven replicates), at two arbitrary fortification levels (0.5 and 1.0 mg/kg), resulting in recoveries in range of 20 to 107.7% and SDRSDs were between 5.6 and 29.1% for infinity[Gd(DPA)(HDPA)] sorbent. Detection and quantification limits for herb ranged from 0.10 to 0.15 mg/kg and from 0.15 to 0.25 mg/kg, respectively, for the different pesticides studied. The developed method is linear over the range assayed, 0.5-10.0 microg/mL, with correlation coefficients ranging from 0.9975 to 0.9986 for all pesticides. Comparison between infinity[Gd(DPA)(HDPA)] sorbent and conventional sorbent (neutral alumina) showed similar performance of infinity[Gd(DPA)(HDPA)] polymeric sorbent for three (bifenthrin, tetradifon, and phosalone) out of six pesticides tested.

Spectroscopic study of a UV-photostable organic-inorganic hybrids incorporating an Eu3+ beta-diketonate complex.

New europium and gadolinium tris-beta-diketonate complexes have been prepared and incorporated in sol-gel-derived organic-inorganic hybrids, named di-ureasils. The general formula [Ln(btfa)3(4,4'-bpy)(EtOH)] (Ln=Eu, Gd; 4,4'-bpy=4,4'-bipyridine; btfa=4,4,4-trifluoro-1-phenyl-1,3-butanedione) for the complexes was confirmed by X-ray crystallography and elemental analysis. The ground-state geometry of the Eu3+ complex was calculated from the Sparkle/AM1 model. The calculated quantum yield obtained from the Sparkle model and from the crystal structure (both 46%) are in satisfactory agreement with the experimental value (38+/-4%). In the isolated complex the most efficient luminescence channel is S0-->S1-->T-->(5D1, 5D0)-->7F0-6, where the exchange mechanism dominates in the energy-transfer channel T-->(5D1, 5D0). For the Eu3+-based di-ureasils a 50% quantum yield enhancement compared to the Eu3+ complex is observed, which suggests an effective hybrid host-metal ion interaction and an active energy-transfer channel between the hybrid host and the Eu3+ complex. The Eu3+-based di-ureasils are photostable under UVA (360 nm) excitation, whereas under UVB (320 nm) and UVC (290 nm) photodegradation occurs.

Experimental and theoretical study of the photophysics and structures of europium cryptates incorporating 3,3'-bi-isoquinoline-2,2'-dioxide.

A detailed photophysical study of [Eu within (biqO2.2.2)(CF3SO3)](CF3SO3)2. CH3CN.H2O (Eu within 1) and two other types of cryptates incorporating three 3,3'-biisoquinoline-2,2'-dioxide units has been performed. Structural crystallographic data of Eu within 1, electronic structure calculations and theoretical models were used to obtain the intramolecular energy transfer rates and the appropriate set of rate equations, which was solved numerically. Quantum yields and decay lifetimes were obtained from these results and compared to the experimental data. The role of the ligand-to-metal charge transfer (LMCT) states was ascertained. A theoretical ligand field and intensity analysis was carried out and the results agree very well with the emission spectra. The molecular structures of the lanthanide cryptates were successfully modelled by the YIII ion using the restricted Hartree-Fock (RHF) method, with the advantage of dealing with closed-shell systems. These molecular structures were used to explain the drastic differences in the photophysics of the three EuIII cryptates.