Preparation and characterization of Allium cepa extract coated biochar and adsorption performance for hexavalent chromium.

The elimination of hazardous metal ions from contaminated water has been an important procedure to improve the quality of the water source. Hence, this study presents the fabrication of Allium cepa extract-coated biochar for the elimination of Cr (VI) from wastewater. The synthesized biochar (SBCH) and modified biochar (BMOJ) were characterized by making use of FTIR, BET, XRD, TGA and SEM. Optimum Cr (VI) removal was achieved at solution pH 2, 0.05 g adsorbent dosage and 180 min agitation period. The adsorptive removal of Cr (VI) onto SBCH and BMOJ followed the pseudo-second-order kinetic model with a satisfactory sum of square residuals (SSR) of 3.874 and 5.245 for SBCH and BMOJ, respectively. Meanwhile, Freundlich isotherm was found to best describe the uptake of Cr (VI) SBCH and BMOJ. Experimental data showed an adsorption capacity of 37.38 and 25.77 mg g-1 and a maximum efficiency of 85.42% and 51.63% for BMOJ and SBCH, respectively. BMOJ also showed good antioxidant characteristics. Thermodynamic data revealed that the uptake of Cr (VI) onto the SBCH and BMOJ was an exothermic and endothermic (ΔH: SBCH = - 16.22 kJ mol-1 and BMOJ = 13.74 kJ mol-1), entropy-driven (ΔS: SBCH = 40.96 J K-1 mol-1 and BMOJ = 93.26 J K-1 mol-1) and spontaneous process. Furthermore, BMOJ demonstrated excellent reusability and promising characteristics for industrial applications.

Thermodynamics, kinetics and isothermal studies of tartrazine adsorption onto microcline/MWCNTs nanocomposite and the regeneration potentials.

The quest for a cheap, effective, and eco-friendly wastewater treatment technique that is free of secondary toxic byproducts, calls for the fabrication of a nature-friendly adsorbent with a robust capacity to decontaminate polluted water sources and be recycled. To this end, we report the fabrication of novel nanocomposite (KMCM) from microcline (KMC) and multiwall carbon nanotubes (MWCNTs). The adsorbents (KMC and KMCM) were characterized using XRD, BET, SEM, TGA and FTIR. The novel and low-cost nano sorbent were designed for the elimination of tartrazine (Tatz) from wastewater. The adsorption of Tatz onto KMC and KMCM was influenced by adsorbent dose, initial Tatz concentration, contact time and solution pH. Experimental data acquired from the equilibrium studies were well addressed by the Langmuir isotherm model. The maximum uptake capacity of 37.96 mg g-1 and 67.17 mg g-1 were estimated for KMC and KMCM. The kinetics for the adsorption of Tatz onto KMC and KMCM was best expressed by pseudo-second-order and Elovich models. The thermodynamic parameters revealed that the uptake of Tatz onto KMC and KMCM was an endothermic (ΔH: KMC = 35.0 kJ mol-1 and KMCM = 42.91 kJ mol-1), entropy-driven (ΔS: KMC = 177.6 J K-1 mol-1 and KMCM = 214.2 J K-1 mol-1) and spontaneous process. Meanwhile, KMCM demonstrated good reusability potential and superior adsorption efficiency when compared to other adsorbents.

Evaluation and remediation protocol of selected organochlorine pesticides and heavy metals in industrial wastewater using nanoparticles (NPs) in Nigeria.

Limited knowledge of the level of contaminants in industrial wastewater within the Nigerian states together with the global challenge of water supply have compelled our investigation into the analyses and removal of organochlorine pesticides (OCPs) and heavy metal contents in industrial wastewater. Wastewater samples were collected from 13 industries across five states in Nigeria. The OCPs content of the samples was extracted, cleaned up and analysed using gas chromatography-mass spectrometry. The results indicate that the mean concentrations of the OCPs in the effluent samples ranged from 1.76 ng L-1 (Dieldrin) to 0.89 ng L-1 (endrin). Cadmium (Cd), chromium (Cr) and lead (Pb) were evaluated in all the effluent water samples. The results show that the average concentrations of the heavy metal ions in the effluent samples ranged from 0.008 ± 0.003 mg L-1 (Cd) to 2.215 ± 0.841 mg L-1 (Pb). For the removal of the identified contaminants, biomagnetite nanoparticles (BioMag), magnetite nanoparticles (MagNPs), biomagnetite-CMC nanocomposite (BioMag-CMC) and magnetite-CMC nanocomposite (MagNPs-CMC) were synthesised and characterised using Braunauer-Emmett-Teller (BET), Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction (XRD) and high resolution-transmission electron microscopy (HR-TEM). This study demonstrates the successful application of nanoparticles (NPs) and nanocomposites in the removal of OCPs and heavy metal ions in industrial effluents. The routine assessment and continuous removal become important to attain a state of clean and healthy aquatic ecosystem due to rapid industrial and technological advances.

Pentaclethra macrophylla stem bark extract anchored on functionalized MWCNT-spent molecular sieve nanocomposite for the biosorption of hexavalent chromium.

NOVELTY STATEMENT: nsufficient innovative research on the sequestration of Cr(VI) from the aquatic ecosystem has made Cr(VI) a recalcitrant water contaminant that often affects water sources. In this work, a novel plant anchor-nanocomposite was fabricated from the spent molecular sieve, multi-walled carbon nanotubes, and the extract from the stem bark of Pentaclethra macrophylla. It was envisaged that due to the phytochemical constituent of the modifier, this nanocomposite could also act as potent adsorbents for the treatment of Cr(VI) polluted water. To the best of our knowledge, the application of Pentaclethra macrophylla stem bark extract as a modifier for the green fabrication of nanocomposite has not been reported. The resulting composites showed good uptake capacity for Cr(VI) as well as efficient reusability.

Enhanced sequestration of Cr(VI) onto plant extract anchored on carbon-coated aluminium oxide composite.

Aluminium oxide (ALU) and carbon-coated aluminium oxide modified with Kigelia africana leaf extract (KECA) were employed for the removal of toxic hexavalent chromium (Cr(VI)) from the aqueous phase. The adsorbents (ALU and KECA) were characterized by TGA, BET, FESEM, FTIR, Raman and XRD spectroscopic techniques. The potential of KECA and ALU to remove Cr(VI) from simulated wastewater was optimum at pH 2, sorbent dose of 0.025 g and a contact time of 200 min. Meanwhile, the uptake capacity of KECA and ALU was enhanced with an increase in sorbent dose, contact time and initial Cr(VI) concentration. The uptake of Cr(VI) onto the adsorbents ALU and KECA was kinetically best described by the pseudo-second-order and Elovich models, respectively. Besides, the equilibrium data acquired for ALU and KECA obeyed Freundlich and Langmuir isotherm models, respectively. ALU and KECA were observed to have optimum adsorption capacity of 56.45 mg g-1 and 258.2 mg g-1, respectively. The adsorption of Cr(VI) onto the adsorbents was thermodynamically feasible, endothermic in nature and entropy-driven. A decrease in efficiency was observed on regeneration of the absorbents, thus limiting their reusability. However, the presence of functional groups with reducing property in the extract of Kigelia africana leaves was noticed to enhance the capacity of the adsorbent to abstract Cr(VI) from the solution. Hence, this study demonstrates the potential of KECA to sequestrate Cr(VI) from an aqueous solution and provides a reference for its application to the treatment of Cr(VI)-laden industrial wastewater.

Thermodynamics, kinetics and isothermal studies of chromium (VI) biosorption onto Detarium senegalense stem bark extract coated shale and the regeneration potentials.

A low-cost adsorbent (Detarium senegalense stem bark extract coated shale (DSMS)) comprising pristine shale (PSH) coated with D. senegalense stem bark extract was prepared and utilized for the adsorption of Cr(VI). The DSMS and PSH were characterized by the SEM, XRD, FTIR, EDX, TGA, and BET. The batch adsorption experiment results showed that DSMS exhibited an excellent ability to adsorb chromium with a maximum removal occurring at pH 2, dosage of 0.05 g and 180 min contact time. The adsorption process was best described by the pseudo-second-order for DSMS and Elovich model for PSH which depicts chemisorption as the major mechanism responsible for the uptake of Cr(VI) onto the adsorbents. Langmuir model provided the best fit to the isotherm analysis on both materials. The maximum adsorption capacity of DSMS and PSH were 64.98 mg g-1 and 29.97 mg g-1 respectively. The thermodynamics revealed that the adsorption of Cr(VI) was feasible, endothermic and entropy driven. Furthermore, after five cycles of reuse, both DSMS and PSH demonstrated effective regeneration and reusability for Cr(VI) uptake. The structural properties, reusability, and high adsorption capabilities of DSMS indicate that they could be used as low-cost adsorbents in large-scale Cr(VI) wastewater treatment. Novelty statement Plant extracts are packed with a variety of polyphenolic compounds, such as aldehydes, alcohols, carboxylics, ethers, ketones, and phenols which contains several functionalities useful in the adsorption of toxic metals. Despite this, research on the use of plant extracts in the modification of adsorbent materials for enhanced adsorption is rare. This study reports for the first time the use of Detarium senegalense stem bark extract coated shale adsorbent for the efficient uptake of Cr(VI) ion.