Broken Instrument Removal Methods with a Minireview of the Literature.

Instrument fracture in the root canal system is an unpleasant incident that may occur during root canal treatment. Comprehensive cleaning of the root canal system is often impossible in the presence of a broken instrument. Therefore, it is often imperative to remove the broken fragment from the root canal system. To date, various methods have been proposed for the removal of broken instruments from the root canal system. However, no consensus has been reached on a safe technique with a high success rate for broken instrument removal. This case series reports six cases of successful removal of broken instruments using different methods including the ultrasonic, tube-and-glue, tube-and-wire, tube-and-internal shaft, and the forceps techniques and also provides a brief review of the relevant literature.

Successful auto-transplantation of a mandibular third molar: A case report on restoring esthetics and function in a 66-year-old patient.

Key Clinical Message: This article describes a successful case of auto-transplantation of a mandibular third molar to replace a non-restorable second molar, highlighting the efficacy of this procedure in restoring function with factors like asepsis, surgical technique, and postoperative care contributing to the success. Abstract: This case report describes successful auto-transplantation of a mandibular third molar to replace a non-restorable second molar in a 66-year-old patient. The procedure involved atraumatic extraction, repositioning, and stabilization of the donor tooth, followed by postoperative care and 1-year follow-up. The favorable outcome highlights the potential of mature third molar transplantation as an effective approach for replacement of missing or non-restorable permanent molar teeth to restore esthetics and function. The success of the procedure was attributed to factors such as asepsis, atraumatic surgical technique, preservation of the periodontal ligament (PDL) vitality, minimal extraoral time, optimal occlusion, and adequate fixation. At the 1-year follow-up, the patient was asymptomatic with stable occlusion, highlighting the optimal efficacy of the procedure.

Management and saving a traumatized poor prognosis maxillary central incisor for 18 years: A patient-centered treatment.

Key clinical message: With today's increasing desire to preserve natural teeth, managing teeth with a poor prognosis is a new challenge for clinicians. A dentist's attention to patient-centered care is essential, which improves dental outcomes. Abstract: Nowadays, patients' interest in preserving their natural teeth has increased. In the patient-centered care model, the clinician should consider the patient's preferences and values in the treatment plan. This strengthens the patient's responsibility toward his own body, resulting in more patient satisfaction and effective cooperation. Therefore, the skill of saving teeth with a poor prognosis, in which there was no other choice but to extract them, becomes essential in patients who want to preserve their natural teeth. This case report presents the successful 18-year treatment and management of a maxillary central incisor of a 17-year-old male with a horizontal root fracture, who was incompletely treated in another medical center when the trauma occurred. The patient presented to us after 6 months. Due to the short length of the root, the patient underwent regenerative endodontic treatment first, but he did not attend follow-ups. Finally, after 8 years, the patient returned with symptoms of infection and periapical radiolucency. The apical part of the root was resorbed during this time. Finally, it was decided to place an apical plug with MTA. MTA was extruded from the apical part of the root canal during the placement of the apical plug. In the 1-, 2-, 4-, and 10-year follow-ups, the patient was completely asymptomatic, and the radiolucent periradicular lesion had healed. However, the extruded MTA was still present in the radiographic images without interfering with the healing process. Finally, the tooth has remained functional for 18 years.

Evaluation of the Antibacterial Effect of Xylene, Chloroform, Eucalyptol, and Orange Oil on Enterococcus faecalis in Nonsurgical Root Canal Retreatment: An Ex Vivo Study.

Objectives: The present ex vivo study is aimed at evaluating the antibacterial efficacy of chloroform, eucalyptol, orange oil, and xylene against E. faecalis biofilm during nonsurgical root canal retreatment. Materials and Methods: Eighty single-rooted teeth were instrumented. The samples were autoclaved, infected with E. faecalis for 4 weeks, and obturated with gutta-percha. Then the teeth were randomly assigned to 4 groups (n = 20): (1) chloroform, (2) eucalyptol, (3) orange oil, and (4) xylene. In all of the groups, gutta-percha removal was conducted according to the same protocol although the solvent used in each group was different. Bacterial samples were collected after gutta-percha removal and following additional apical enlargement. Intergroup and intragroup analyses were conducted using one-way ANOVA combined with the post hoc Tukey test and the paired-sample t-test, respectively. Statistical significance was set to 0.05. Results: All of the groups showed more than 99% bacterial load reduction. The least bacterial load after gutta-percha removal was observed in the chloroform group (p < 0.001). The orange oil group showed a significantly lower bacterial load compared to the eucalyptol group (p = 0.001), while it was not different from the xylene group (p = 0.953). The xylene group also had a significantly lower bacterial load compared with the eucalyptol group (p = 0.017). After apical enlargement, the chloroform group had a significantly lower bacterial load compared to the other groups. The comparison of bacterial load values before and after apical enlargement in the chloroform and eucalyptol groups showed a statistically significant difference (p choloroform = 0.011, p eucalyptol = 0.001). Conclusion: Chloroform was the most effective solvent in terms of antimicrobial activity against E. faecalis followed by orange oil and xylene, which were not significantly different though, and eucalyptol. All of the solvents showed more than 99% bacterial load reduction. Chloroform and xylene revealed to be associated with favorable antibiofilm activity among the examined solvents.

Evaluation of the Canal Transportation Following Glide Path Preparation with Different Rotary Systems: A Comparative Study.

Objectives: Ideal root canal shaping might be more challenging particularly in cases with severely curved canals or complex anatomical variations. Glide path preparation is suggested as a critical step to achieve ideal canal preparation. The present study is aimed at evaluating transportation at different levels of the canal following glide path preparation by five different path finders. Materials and Methods: The study was conducted on 100 S-shaped canal simulator blocks. Glide path was prepared in five groups including (1) Scout RaCe (#10 and #15, 0.02), (2) One G (#14, 0.03), (3) PathFile (#13 and #16, 0.02), (4) GPS (#15, 0.03), and (5) K file (#15, 0.02) (Control group). The first four groups were NiTi rotary instruments, while the last group was a stainless steel hand file. The aforementioned files were used after canal negotiation by a #10 stainless steel hand file. Before- and after-preparation photos were taken and were superimposed in Adobe PhotoShop CC 2019. Transportation measurements were conducted in Digimizer. Absolute canal transportation was calculated at 10 cross-sections. Intergroup and intragroup data analysis were conducted using one-way and repeated measures ANOVA tests, respectively, in SPSS 26.0. The significance level was set to 0.05. Results: Although K file led to significantly more transportation in the apical and middle thirds (p < 0.001), rotary groups were not statistically different. In the coronal third, K files led to significantly more transportation compared to Scout RaCe and PathFile (p < 0.05). Conclusion: Within the limitations of the present study, regardless of the recruited rotary system, glide path preparation using NiTi rotary instruments leads to less canal transportation compared to stainless steel hand files.

Cyclic Fatigue Resistance of Five Different Glidepath Files in a Double Curved Artificial Canal.

Introduction: The aim of this study was to examine the cyclic fatigue resistances #16 ProGlider, #15.02 Scout RaCe, #15.03 NeoNiTi GPS, One G and Path-File NiTi glide path files in S-shaped artificial canals. Materials and Methods: Twenty files from each group were tested. An artificial groove simulating double (S-shaped) curved canal measuring 1.5 mm in width at the top level decreasing towards the apical reaching 0.3 mm at the tip having a 0.06 taper, 18 mm in length, and 1.5 in depth machined in a stainless steel block was used in this study. Resistance to cyclic fatigue was determined by counting the numbers of cycles to failure (NCF). Furthermore, the fragment length of the fractured tips and angle and radius of curvature formed by each file in each trajectory were evaluated. The data were analyzed using the one-way analysis of variance and Tukey's HSD test and the level of significance was set at 5%. Results: NeoNiti GPS and Scout RaCe glide path files showed significantly higher NCF values compared to other evaluated glide path files (P<0.001) but no significant difference when compared with each other (P=0.67). Conclusion: Based on this in vitro study NeoNiti GPS and Scout RaCe glide path files had the highest cyclic fatigue resistance in simulated double (S-shaped) curved artificial canals among the evaluated path finding files. Therefore, it seems that they can be used with more confidence in endodontic treatment of S-shaped canals clinically.

Evaluation of Curved Canal Transportation Using the Neoniti Rotary System with Reciprocal Motion: A Comparative Study.

The ideal root canal preparation is where the original canal morphology is maintained during the biomechanical preparation. Preparation of curved canals has always been a challenge to clinicians. Better results have been suggested for a single NiTi instrument with reciprocating motion than the conventional continuous rotation method in the preparation of curved root canals. Although the Neoniti rotary system is not suggested to be used with reciprocal motion, running a pilot study, we found that it could be possible. The present study aimed to investigate if shaping curved canals using the Neoniti rotary system with reciprocal motion leads to better results in terms of root canal transportation. One hundred acrylic j-shape canal simulator endoblocks were used in this study. Five preparation sequences were applied: GPS followed by A1#20 (GPS + A1#20), GPS followed by A1#20 and then A1#25 (GPS + A1#20 + A1#25), GPS followed by A1#25 (GPS + A1#25), hand file followed by A1#20 (hand file + A1#20), and GPS followed by A1#20 (with reciprocal motion) (GPS + A1#20(reciprocal)). Pictures were taken from blocks once before and once after preparation from two dimensions. Before-and-after pictures were superimposed in Photoshop software. Measurements were performed in Digimizer. The number of autoreverses and pecking motions was recorded after reviewing the recorded videos. Data were analyzed in SPSS, version 26. A p value of less than 0.05 was considered statistically significant. The group GPS + A1#20 + A1#25 had more transportation compared with the others, at apical, middle, and coronal thirds not only in the frontal view but also in the lateral view. Other groups were not significantly different. The number of peckings and autoreverses was significantly less when A1#25 was used after GPS and A1#20. When A1#20 was used with reciprocal motion, it had less peckings compared with the same file with continuous rotation, and no autoreverses were observed in that group. Using Neoniti files with reciprocal motion might result in less instrument fatigue and favorable results, with respect to canal anatomy preservation. Using A1#20 before A1#25 also will decrease the stress on the instrument during preparation. However, this may lead to significantly more canal transportation.

Comparison of bacterial microleakage of three bioactive endodontic sealers in simulated underwater diving and aviation conditions.

BACKGROUND: Bacterial microleakage is an important cause of apical periodontitis and endodontic treatment failure. This study aimed to assess the bacterial microleakage of nano-mineral trioxide aggregate (nano-MTA) as a sealer, Endoseal MTA, and GuttaFlow Bioseal sealers in atmospheric pressure, and simulated underwater diving and aviation conditions. METHODS: In this in vitro, experimental study, 180 extracted single-rooted teeth were cleaned and shaped, and were then randomly divided into three groups for single-cone obturation using Endoseal MTA, GuttaFlow Bioseal, or nano-MTA as a sealer. Each group was then randomly divided into three subgroups, and subjected to ambient atmospheric pressure, 2 atm pressure (to simulate underwater diving), and 0.5 atm pressure (to simulate aviation) using a custom-made pressure chamber. The teeth then underwent microbial leakage test using Streptococcus mutans (S. mutans), and the percentage of samples showing microleakage was recorded for up to 1 month, and analyzed using the Chi-square test. RESULTS: The three sealer groups were significantly different regarding bacterial microleakage (P < 0.05). The nano-MTA group showed significantly higher microleakage after 15 days than the other two groups (P = 0.006). The effect of pressure on bacterial microleakage was not significant in any sealer group (P > 0.05). CONCLUSION: Within the limitations of this in vitro study, it may be concluded that single-cone obturation technique using nano-MTA as a sealer results in lower resistance to bacterial microleakage compared with the use of GuttaFlow Bioseal, and Endoseal MTA. Pressure changes in simulated underwater diving and aviation conditions had no significant effect on bacterial microleakage. Trial Registration Number This is not a human subject research.

Measurement of Copper ion Extrusion from the Apex of Human Teeth with Single Canals Following of Electrophoresis.

OBJECTIVE: Preventing bacterial overgrowth is an essential component of successful root canal treatment. Increasing the penetration of antimicrobial substances into the canal through electrophoresis is one of the possible methods. This study aimed to measure the copper ions extruding from the root apex after using an electrophoresis device (Depotphorese®) in human teeth with single canals. METHODS: In this ex-vivo study, thirty extracted human teeth with single canals were randomly divided into 2 groups. Group 1 as root canal preparation (WP) and group 2 as control (without root canal preparation). Each sample was individually fixed by alginate in a 5 ml sterile Eppendorf tube (microcentrifuge tube), and the root end was in contact with the distilled water solution. Ions derived from calcium hydroxide plus cupper paste (Cupral®) which mobilized via a low current electric field (1.5 mA/min for10 min) by Depotphorese® device. The copper ions in water solution were measured by spectrophotometric and supernatant methods. RESULTS: Copper ions were extruded from the end of the apex in two groups. However, based on the results of the t-test; copper ion penetration was significantly lower in the control group compared to the WP group (P<0.05). CONCLUSION: Electrophoresis increased copper extrusion from the apical foramen. Although the root canal preparation increases the copper ion output in an ex-vivo environment, the amount of copper extruded from the root apex end was lower than the toxic dose. It seems that electrophoresis of copper plus calcium hydroxide mixture in endodontic treatments can be a safe procedure.

Effect of Diabetes on Rotary Instrumentation of Dentin.

INTRODUCTION: Diabetes mellitus (DM) may affect the physical and mechanical properties of dentin, which could potentially have an impact on root canal procedures. This study aimed to compare the amount of dentin removed by an endodontic rotary file, comparing dentin from diabetic patients with dentin from control patients under laboratory conditions. METHODS: The amount of dentin removed was tested using new F3 ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) files applied against the surface of prepared dentin discs for 3 different groups: diabetic type 1 (D1), diabetic type 2 (D2), and nondiabetic (normal). The dentin removed was determined by measuring the depth of penetration of the file using a digital caliper and by measuring the weight loss. Data were analyzed using Kolmogorov-Smirnov, analysis of variance, post hoc Tukey, and Pearson correlation tests (P < .05). RESULTS: Significantly more dentin was removed, and the penetration of the F3 instrument was significantly higher (P < .05) in DM specimens. The statistical analysis revealed significant differences between the D1, D2, and normal groups (P < .05) for the weight loss of the specimen as well as the penetration depth at point B (P < .05). Both the weight loss and depth of penetration showed a very high positive correlation (P < .05). CONCLUSIONS: The dentin of patients suffering from both D1 and D2 exhibited an increased amount of dentin removed compared with the nondiabetic dentin specimens. This can be observed by the increased penetration of the rotary instruments into dentin. Under certain circumstances, this may impact instrumentation, increasing procedural accidents and leading to subsequent weakening of root canal-treated teeth in diabetic patients.

Management of a Large Periapical Lesion Using Decompression: A Case Report with Three-year Follow-up.

Large radicular lesions should be treated initially by orthograde root canal therapy. When the signs and symptoms of the infection (e.g. persistent purulent drainage) do not resolve after this treatment, then surgical approaches should be considered. In the cases of large radicular cysts, total enucleation of the cyst can endanger adjacent structures and teeth. Therefore, decompression or marsupialization techniques are recommended in order to decrease the size of the lesion. In this case report, a 55-year-old woman with previously initiated therapy was referred to endodontic department for management of a sinus tract associated with tooth #7. Root canal treatment was performed and intracanal irrigant (5.25% sodium hypochlorite) activated using passive ultrasonic application, various intracanal medicament (calcium hydroxide, double antibiotic paste) was used in multiple sessions, but intracanal purulent drainage was not resolved. After this, decompression was performed using needle cap to maintain the opening of the cyst and remained for three months. During this period the cavity was kept clean and rinsed by the patient with 0.2% chlorhexidine mouthwash. After three-year follow-up, radiographic examination revealed substantial osseous repair of the defect and clinical signs and symptoms were absent.

Comparing the Ability of Different Materials and Techniques in Filling Artificial Internal Resorption Cavities.

OBJECTIVE: This ex vivo study aims to investigate the root filling quality of warm vertical technique, single-cone technique with GuttaFlow2, Endoseal MTA and EndoSequence BC sealer as a sealer in artificial internal resorption cavity. METHODS: For this study, 40 human single-root teeth were selected. After root preparation, the roots were horizontally sectioned 7 mm from the apex. The hemisphere cavities were created on both sides, and then they were re-approximated. According to filling methods and materials, the samples were randomly as-signed to four experimental groups: I: warm vertical compaction technique (WVC), II: single-cone technique with GuttaFlow2 (GF), III: single-cone technique with Endoseal MTA sealer (EM), IV: single-cone technique with EndoSequence BC sealer (ES). Filled roots were radiographed in buccolingual and mesiodistal views to check the obturation, and stored in humid environment at the room temperature for 7 days. Each tooth was sectioned 7 mm from the root apex at the level of the previous cut, and it was then photographed un-der stereomicroscope. The photographs and radiographs of all samples were imported to an image-analysis software to calculate the percentage of sealer, gutta-percha, and voids. The results were statistically analyzed using one-way ANOVA and Kruskal-Wallis Dunn's tests. RESULTS: In buccolingual view of radiographs, the WVC and EM groups showed significantly lower percent-age of voids (P value<0.05) compared to that in the GF group. In mesiodistal view, the WVC and EM groups showed significantly lower percentage of voids (P value<0.05) compared to that in the GF and ES groups. In stereomicroscope evaluation, the WVC and EM groups showed significantly lower percentage of voids (P value<0.05) compared to that in the GF and ES groups. The differences observed between the WVC and EM groups (P value>0.05) or between the GF and ES groups (P value>0.05) were not significant. CONCLUSION: WVC technique and single-cone technique with EM sealer are the optimum methods to fill ar-tificial resorption cavities.

Challenging Diagnosis of Severe Bilateral Cervicofacial Subcutaneous Emphysema following Root Perforation in a Maxillary Lateral Incisor: A Case Report.

Cervicofacial subcutaneous emphysema (CFSE) is a rare complication. CFSE may happen following some dental procedures including root canal therapy and is caused by unintentional entry of air into potential spaces of head and neck. In the current report, a case of extensive bilateral subcutaneous emphysema -following the root perforation of a maxillary anterior tooth- is presented. A 26-year-old woman was referred for further consultation concerning her right maxillary lateral incisor; for which a poor prognosis was considered following an endodontic treatment. There was a history of sudden facial swelling during root canal therapy. With the exacerbation of the problem and experiencing other symptoms, she was hospitalised. CT scan showed bilateral extension and penetration of air into submandibular, peri-orbital and parapharyngeal spaces. Clinical and radiographic evaluations of the maxillary lateral incisor revealed mid-root perforation on its buccal side, which was sealed by MTA. Eventually, the tooth was successfully restored.

The Effect of Different Combinations of Calcium Hydroxide as Intra-Canal Medicament on Endodontic Pain: A Randomized Clinical Trial Study.

Introduction: After treating the tooth root canal, pain is one of the problems that many patients are facing. In order to reduce pain, and regarding the advice of treating necrotic teeth during several sessions, intra-canal medicaments can be used between sessions. The purpose of this study is to compare pain relieving effect of calcium hydroxide combined with three solutions of normal saline, chlorhexidine 2% and dexamethasone. Materials and methods: This triple blind randomized clinical trial was performed on 90 necrotic molars and premolars. The patients were classified in three medicaments' groups including mixture of calcium hydroxide and normal saline (G1), chlorhexidine 2% (G2) or dexamethasone (G3) that were placed in the canal during the first treatment session. The patients were provided with a Heft-Parker Visual Analog Scale form to record their pain in different intervals of 4, 24, 48, 72 and 96 h after cleaning and shaping the root canal. Data analysis was carried out using the Chi-Square, one-way ANOVA and Repeated Measure tests. Results: No significant difference was observed in the mean pain of the groups after 4 h (P>0.05). However, a significant difference was found between G1 and G3 in the mean pain from day 1 to 72 h after treatment. The mean pain was less in dexamethasone (G3) group (P<0.05), but the difference was not statistically significant at 96 h after treatment (P>0.05). No significant difference was found between "G2-G1" and "G2-G3" groups at different time intervals (P>0.05). Conclusion: The mixture of calcium hydroxide and dexamethasone compared to calcium hydroxide and normal saline in short and medium time had a significant effect on reducing pain after cleaning and shaping the root canal. It seems that the mixture of calcium hydroxide and dexamethasone can be considered as an effective medicament on reducing pain during root canal treatment sessions.

Anti-bacterial properties of calcium hydroxide in combination with silver, copper, zinc oxide or magnesium oxide.

Prevention of bacterial growth among root canal treatment sessions is a prerequisite for successful root canal treatment. The most common way to achieve this is to use calcium hydroxide in the treatment sessions. Some studies have shown calcium hydroxide inefficiency in this field. The aim of this study was to investigate and compare the effects of silver, copper, zinc oxide and magnesium oxide nanoparticles on the inhibitory effects of calcium hydroxide based on Enterococcus faecalis species. Enterococcus faecalis bacteria having 0.5 McFarland concentration were prepared. Plates containing BHI agar medium were prepared. In each plate, four wells were created and the plate was cultured using a sterile swab. Afterwards, calcium hydroxide composition of 1% and 2% concentration from silver, copper, zinc oxide and magnesium oxide nanoparticles were prepared separately, as well as the combination of calcium hydroxide with 1% silver in combination with 1% of copper, zinc oxide and magnesium oxide nanoparticles, which were then transferred to the wells. After 24 hours of incubation, the inhibition zone diameter was measured. Data were analyzed by Mann-Withney test. At 1% concentration, only the combination of copper nanoparticles with calcium hydroxide could significantly create an inhibition zone larger than calcium hydroxide alone (P value <0.5). At 2% concentration, the combination of copper nanoparticles with calcium hydroxide, and the combination of silver nanoparticles with calcium hydroxide, were significantly higher than calcium hydroxide alone (P value <0.5). The calcium hydroxide composition containing 1% silver nanoparticles in combination with 1% copper, zinc oxide and magnesium oxide nanoparticles significantly increased the growth inhibition zone more than calcium hydroxide alone. (P Value <0.5). Copper nanoparticles showed the best antibacterial properties among silver, copper, magnesium oxide and zinc oxide nanoparticles in combination with calcium hydroxide. Also, the combination of 1% of nanoparticles with each other increases antibacterial properties.

The Effect of Photobiomodulation on the Depth of Anesthesia During Endodontic Treatment of Teeth With Symptomatic Irreversible Pulpitis (Double Blind Randomized Clinical Trial).

Introduction: Achieving appropriate anesthesia in patients with symptomatic irreversible pulpitis in mandibular molars during endodontic treatment is always one of the most challenging aspects. Photobiomodulation (PBM) has been used in dentistry due to its anti-inflammatory properties and regenerative effects. This study evaluates the effects of PBM in the depth of anesthesia in inferior alveolar nerve block. Methods: In this randomized clinical trial, 44 patients requiring endodontic treatment in lower molar, left or right were selected, half of them were randomly treated with PBM therapy. Laser irradiation by 980 nm diode laser with a single dose (15 J/cm2, for 20 seconds) before anesthesia was performed at the buccal aspect. Inferior alveolar nerve block was performed once. Success was defined as no or mild pain (no need for any supplemental injection), based on the visual analogue scale during access cavity preparation. Results were evaluated using SPSS software. RESULTS: The results of this study showed that the necessity for supplemental injection was lower in the group receiving laser than in the group without laser (P = 0.033). The mean pain intensity during dentin cutting was lower in the group receiving laser than in the group without laser (P = 0.031). Also, the mean pain intensity during pulp dropping was lower in the group receiving laser, than the group without laser (P = 0.021). Conclusion: Based on the results of this study, it seems that the application of PBM before anesthesia is effective on increasing depth of anesthesia.

Effect of dental restorative materials on total antioxidant capacity and calcium concentration of unstimulated saliva.

BACKGROUND: To evaluate the effect of dental amalgam and composite restorations on total antioxidant capacity (TAC) and calcium (Ca) ion concentration of unstimulated saliva. MATERIAL AND METHODS: Forty-eight children aged 6-10 years selected and divided into three groups of sixteen (8 males, 8 females). In group A and B, samples consisted of two class II dental composite or amalgam restorations, while in group C samples were caries-free (control group). Unstimulated saliva from all samples was collected and TAC was measured by spectrophotometry using an adaptation of 2, 2'-azino-di-(3-ethylbenzthiazoline-6-sulphonate) (ABTS) assay. The Ca ion level was estimated by an auto- analyzer. Data were analyzed with one- and two-way ANOVA test, at a p<.05 level of significance. RESULTS: Composite samples showed significantly higher TAC and lower Ca ion levels compared to amalgam and caries-free samples (p<.05). The TAC values showed only significant difference between groups (p<.05), while the Ca ion results showed significant differences within and between groups (p<.05). CONCLUSIONS: Dental composite restorations increased TAC and decreased Ca ion levels more than amalgam restorations in saliva. Gender is an effective factor in changes induced in oral cavity as females showed more emphatic reaction to dental filling materials than males. STATEMENT OF CLINICAL RELEVANCE: Patients who have dental restorations, especially dental composites, should pay more attention to their dental hygiene, because dental restorations can increase oxidative stress and decrease Ca ion level in saliva, which might jeopardize remineralization process of tooth structures after demineralization. Key words:Amalgam, caries, composite, saliva, total antioxidant capacity.

The Effect of Root Canal Preparation Using Single Versus Multiple Endodontic Rotary Files on Post-operative Pain, a Randomised Clinical Trial.

OBJECTIVE: The purpose of this randomised clinical trial study was to compare the incidence and intensity of post-operative pain following the use of single-file and multi-file rotary instruments with continuous rotational motion for root canal preparation in asymptomatic permanent human teeth. METHODS: A total of 105 healthy consenting patients who fulfilled specific inclusion criteria and had premolar or molar teeth diagnosed with asymptomatic irreversible pulpitis without periapical pathosis requiring endodontic treatment participated in this study. The patients were randomly allocated by stratification into five groups of 21 according to the instruments and systems used for root canal preparation: (a) Neoniti A1 (#25) single file, (b) RaCe #25/.06 single file, (c) Mtwo #25/.06 single file, (d) Easy RaCe, (e) and Mtwo multifile. Endodontic treatment was carried out in a single appointment. The severity of post-operative pain was assessed by numerical rating scale scores until complete pain relief was achieved. Analgesic consumption and the incidence of pain were also evaluated. Data were analysed by one-way ANOVA and Tukey HSD tests. RESULTS: When comparing different instruments and systems for canal preparation, the analgesic consumption, incidence and intensity of post-operative pain did not differ (p>0.05). The highest levels of post-operative pain were experienced after 6 h in all groups. CONCLUSION: The post-operative pain did not differ between the single and multi-file root canal preparation techniques evaluated in this study.

Evaluation of the Fractured Surface of Five Endodontic Rotary Instruments: A Metallurgical Study.

INTRODUCTION: The aim of this study was to compare several metallurgic properties of Neoniti instrument with four other commonly used endodontic rotary files. METHODS AND MATERIALS: Neoniti A1 (25/0.08), RaCe (25/0.06), Mtwo (25/0.06), Twisted file (25/0.06) and ProTaper Next X2 (25/0.06) were examined by differential scanning calorimetry (DSC) before and after heat treatment at 500°C. X-ray diffraction (XRD) was also performed on the specimens. Furthermore, scanning electron microscopy (SEM) and x-ray energy-dispersive spectrometric (EDS) analyses were carried out on randomly selected fractured files. RESULTS: In SEM tests, dimpled ruptures, characteristic of ductile fracture, were seen in all evaluated cross sections of all files. The SEM results of all evaluated files were alike. EDS results revealed higher proportions of Nickel (Ni) rich intermetallic compounds in Neoniti; whereas, in all the other files the proportion of Titanium (Ti) rich precipitates was higher. DSC results indicated that the temperature present in the oral environment, the austenite phase existed in all files. Mtwo and RaCe files did not show austenite transformation in the temperature range evaluated in this study. Only Neoniti revealed rhombohedal phase (R-phase) transformation. After heat treatment. No significant difference was seen in the transformation temperatures of all evaluated files. XRD evaluations revealed that Neoniti contained both Ni-rich and Ti-rich precipitates. The amount of the martensite phase was higher in ProTaper Next. CONCLUSION: The metallurgic properties of Neoniti files were different from other evaluated rotary files. This file contained higher proportions of Ni-rich precipitates.

Penetration Depth of Sodium Hypochlorite in Dentinal Tubules after Conventional Irrigation, Passive Ultrasonic Agitation and Nd:YAG Laser Activated Irrigation.

INTRODUCTION: The penetration depth of irrigating solutions in dentinal tubules is limited; consequently, bacteria can remain inside dentinal tubules after the cleaning and shaping of the root canal system. Therefore, new irrigation systems are required to increase the penetration depth of irrigating solutions in dentinal tubules. METHODS: A comparative study regarding the penetration depth of sodium hypochlorite (NaOCl) solution in dentinal tubules using four methods, (1) conventional irrigation (CI), (2) smear layer removal plus conventional irrigation (gold standard), (3) passive ultrasonic agitation (PUA) and (4) Nd:YAG laser activated irrigation (LAI), took place on 144 extracted mandibular teeth with a single root canal. After decoronation with a diamond disc and working length determination, the apical foramen was sealed with wax. The canals were prepared up to #35 Mtwo rotary file and 5.25% NaOCl was used for irrigation during preparation. To study the penetration depth of NaOCl, smear layer was eliminated in all samples. Dentinal tubules were stained with crystal violet and after longitudinal sectioning of teeth, the two halves were reassembled and root canal preparation was performed up to #40 Mtwo rotary file. Then the samples were distributed into four experimental groups. Depth of the bleached zone was evaluated by stereomicroscope (20X). Data were analyzed by Kruskal-Wallis test. RESULTS: The highest and lowest average for NaOCl penetration depth in all three coronal, middle and apical sections belonged to CI + smear layer removal and CI. A statistically significant difference was seen when comparing the penetration depth of CI + smear layer removal group to CI and PUA groups in coronal and middle third, in which the average NaOCl penetration depth of the gold standard group was higher (P < 0.05). A statistically significant difference was seen between CI + smear layer removal group and the other three groups including CI, PUA and LAI in apical third, in which the average NaOCl penetration depth in the gold standard group was higher (P < 0.001). CONCLUSION: The standard protocol for smear layer removal led to more effective smear layer elimination and deeper penetration depth of irrigation solutions. PUA and LAI groups exhibited less smear layer elimination and penetration depth of irrigation solutions. Therefore, CI+smear layer removal should still be considered as the gold standard.