Programming Positive Mechanofluorescence in Liquid Crystalline Elastomers.

Liquid single crystal elastomers (LSCEs) containing organic fluorophores within their polymeric network are attractive materials to detect forces with simple spectroscopic measurements. Hitherto, all mechanoluminescent LSCEs decrease their emission intensity upon mechanical stimulation; that is, they display negative mechanofluorescence. Such behavior is governed by the mechanically induced approximation of the quenching mesogenic units and the fluorophores. In this work, we propose the integration of fluorescent molecular rotors (FMRs), whose luminescence is not quenched by the mesogens, in LSCEs as a valuable strategy to conceive elastomeric materials programmed with exactly the opposite behavior, i.e., their fluorescence increases upon deformation (positive mechanofluorescence). Specifically, carbazole-indolenine dyes are interesting candidates for this purpose since their luminescence depends mainly on the degree of intramolecular rotation allowed by the local environment. On this basis, the uniaxial deformation of an LSCE, along its anisotropic direction, incorporating such FMRs will place the fluorophores in a more restricted medium, leading to the desired enhanced emission at the macroscale.

Prevalence of missed lesions in patients with inadequate bowel preparation through a very early repeat colonoscopy.

OBJECTIVES: When bowel preparation (BP) is inadequate, international guidelines recommend repeating the colonoscopy within 1 year to avoid missing clinically relevant lesions. We aimed to determine the rate of missed lesions in patients with inadequate BP through a very early repeat colonoscopy with adequate BP. METHODS: Post hoc analysis was conducted using data collected from a prospective multicenter randomized clinical trial including patients with inadequate BP and then repeat colonoscopy. Inadequate BP was defined as the Boston Bowel Preparation Scale (BBPS) score <2 points in any segment. We included patients with any indication for colonoscopy. The adenoma detection rate (ADR), advanced ADR (AADR), and serrated polyp detection rate (SPDR) were calculated for index and repeat colonoscopies. RESULTS: Of the 651 patients with inadequate BP from the original trial, 413 (63.4%) achieved adequate BP on repeat colonoscopy. The median interval between index and repeat colonoscopies was 28 days. On repeat colonoscopy, the ADR was 45.3% (95% confidence interval [CI] 40.5-50.1%), the AADR was 10.9% (95% CI 8.1-14.3%), and the SPDR was 14.3% (95% CI 10.9-17.7%). Cancer was discovered in four patients (1%; 95% CI 0.2-2.5%). A total of 60.2% of all advanced adenoma (AA) were discovered on repeat colonoscopy. A colon segment scored BBPS = 0 had most AA (66.1%) and all four cancers. CONCLUSION: Patients with inadequate BP present a high rate of AAs on repeat colonoscopy. When a colonoscopy has a colon segment score BBPS = 0, we recommend repeating the colonoscopy as soon as possible.

Remote Spatiotemporal Control of a Magnetic and Electroconductive Hydrogel Network via Magnetic Fields for Soft Electronic Applications.

Multifunctional hydrogels are a class of materials offering new opportunities for interfacing living organisms with machines due to their mechanical compliance, biocompatibility, and capacity to be triggered by external stimuli. Here, we report a dual magnetic- and electric-stimuli-responsive hydrogel with the capacity to be disassembled and reassembled up to three times through reversible cross-links. This allows its use as an electronic device (e.g., temperature sensor) in the cross-linked state and spatiotemporal control through narrow channels in the disassembled state via the application of magnetic fields, followed by reassembly. The hydrogel consists of an interpenetrated polymer network of alginate (Alg) and poly(3,4-ethylenedioxythiophene) (PEDOT), which imparts mechanical and electrical properties, respectively. In addition, the incorporation of magnetite nanoparticles (Fe3O4 NPs) endows the hydrogel with magnetic properties. After structural, (electro)chemical, and physical characterization, we successfully performed dynamic and continuous transport of the hydrogel through disassembly, transporting the polymer-Fe3O4 NP aggregates toward a target using magnetic fields and its final reassembly to recover the multifunctional hydrogel in the cross-linked state. We also successfully tested the PEDOT/Alg/Fe3O4 NP hydrogel for temperature sensing and magnetic hyperthermia after various disassembly/re-cross-linking cycles. The present methodology can pave the way to a new generation of soft electronic devices with the capacity to be remotely transported.

Hybrid Ni@ZnO@ZnS-Microalgae for Circular Economy: A Smart Route to the Efficient Integration of Solar Photocatalytic Water Decontamination and Bioethanol Production.

Water remediation and development of carbon-neutral fuels are a priority for the evermore industrialized society. The answer to these challenges should be simple, sustainable, and inexpensive. Thus, biomimetic-inspired circular and holistic processes combing water remediation and biofuel production can be an appealing concept to deal with these global issues. A simple circular approach using helical Spirulina platensis microalgae as biotemplates to synthesize Ni@ZnO@ZnS photocatalysts for efficient solar water decontamination and bioethanol production during the recycling process is presented. Under solar irradiation, the Ni@ZnO@ZnS-Spirulina photocatalyst exhibits enhanced activity (mineralization efficiency >99%) with minimal photocorrosion and excellent reusability. At the end of its effective lifetime for water remediation, the microalgae skeleton (mainly glycogen and glucose) of the photocatalyst is recycled to directly produce bioethanol by simultaneous saccharification and fermentation process. An outstanding ethanol yield of 0.4 L kg-1, which is similar to the highest yield obtained from oxygenic photosynthetic microorganisms, is obtained. Thus, the entire process allows effective solar photocatalytic water remediation and bioethanol production at room temperature using simple and easily scalable procedures that simultaneously fixes carbon dioxide, thereby constituting a zero-carbon-emission circular process.

Randomized Clinical Trial: A Normocaloric Low-Fiber Diet the Day Before Colonoscopy Is the Most Effective Approach to Bowel Preparation in Colorectal Cancer Screening Colonoscopy.

BACKGROUND: Clinical guidelines recommend either a clear-liquid diet or a low-fiber diet for colonoscopy preparation. Participants in a screening program are usually motivated healthy individuals in which a good tolerability is important to improve adherence to potential surveillance colonoscopies. OBJECTIVE: Our aim was to assess whether or not a normocaloric low-fiber diet followed the day before a screening colonoscopy compromises the efficacy of bowel cleansing and may improve the tolerability of bowel preparation. DESIGN: This is a randomized, endoscopist-blinded, noninferiority clinical trial. SETTINGS: The study was conducted at a tertiary care center. PATIENTS: A total of 276 consecutive participants of the Barcelona colorectal cancer screening program were included. INTERVENTION: Participants were randomly assigned to a clear-liquid diet or a normocaloric low-fiber diet the day before the colonoscopy. Both groups received 4 L of polyethylene glycol in a split-dose regimen. MAIN OUTCOME MEASURES: Primary outcome was the adequate bowel preparation rate measured with the Boston bowel preparation scale. Secondary outcomes included tolerability, fluid-intake perception, hunger, side effects, and acceptability. RESULTS: Participants in both groups were similar in baseline characteristics. Adequate bowel preparation was achieved in 89.1% vs 95.7% in clear-liquid diet and low-fiber diet groups, showing not only noninferiority, but also superiority (p = 0.04). Low-fiber diet participants reported less fluid-intake perception (p = 0.04) and less hunger (p = 0.006), with no differences in bloating or nausea. LIMITATIONS: The single-center design of the study could limit the external validity of the results. The present findings may not be comparable to other clinical settings. CONCLUSION: A normocaloric low-fiber diet the day before a screening colonoscopy achieved better results than a clear-liquid diet in terms of adequate colon preparation. Moreover, it also improved the perception of hunger and excessive fluid intake. Registered at clinicaltrials.gov: NCT02401802. See Video Abstract at http://links.lww.com/DCR/A829.

Picosecond Switchable Azo Dyes.

Azo dyes that combine electron-withdrawing thiazole/benzothiazole heterocycles and electron-donating amino groups within the very same covalent skeleton exhibit relaxation times for their thermal isomerization kinetics within milli- and microsecond timescales at room temperature. Notably, the thermal back reaction of the corresponding benzothiazolium and thiazolium salts occurred much faster, within the picosecond temporal domain. In fact, these new light-sensitive platforms are the first molecular azo derivatives capable of reversible switching between their trans and cis isomers in a subnanosecond timescale under ambient conditions. In addition, theoretical calculations revealed very low activation energies for the isomerization process, in accordance with the fast subnanosecond kinetics that were observed experimentally.

A Photoactivatable Far-Red/Near-Infrared BODIPY To Monitor Cellular Dynamics in Vivo.

A mechanism to photoactivate far-red/near-infrared fluorescence with infinite contrast and under mild visible illumination was designed around the photophysical properties of borondipyrromethene (BODIPY) dyes and the photochemical behavior of oxazine heterocycles. Specifically, the photoinduced and irreversible cleavage of an oxazine ring with a laser line at 405 nm extends the electronic conjugation of a BODIPY chromophore over a 3 H-indole auxochrome with a 2-(4-methoxyphenyl)ethenyl substituent in position 5. This structural transformation shifts bathochromically the main absorption band of the BODIPY component to allow the selective excitation of the photochemical product with a laser line of 633 nm and produce fluorescence between 600 and 850 nm. This combination of activation, excitation, and emission wavelengths permits the visualization of the cellular blastoderm of developing Drosophila melanogaster embryos with optimal contrast and essentially no autofluorescence from the biological specimen. Furthermore, the sequential acquisition of images, after the photoactivation event, enables the tracking of individual cells within the embryos in real time. Thus, our structural design and operating principles for the photoactivation of far-red/near-infrared fluorescence can evolve into invaluable probes to monitor cellular dynamics in vivo.

Activation volumes for cis-to-trans isomerisation reactions of azophenols: a clear mechanistic indicator?

The thermal cis-to-trans isomerisation reaction of a series of hydroxy-substituted azo derivatives was studied kinetico-mechanistically as a function of temperature and pressure in order to investigate the possible role of the solvent in controlling the isomerisation mechanism, viz. inversion versus rotation. The variation of the observed first order rate constants for kinetic runs carried out at different temperatures and pressures was used to determine the thermal activation parameters ΔH‡ and ΔS‡, and the pressure activation parameter ΔV‡. In addition, some experiments with deuterated species or solvents were also performed. The reported results could be interpreted as indicative of a changeover from an inversion mechanism for non-polar solvents to a rotational mechanism for polar solvents, capable of hydrogen bonding, for some of the systems studied. However, the operation of a rotational mechanism in all studied cases can account more consistently for the data observed.

Sequential Uncaging with Green Light can be Achieved by Fine-Tuning the Structure of a Dicyanocoumarin Chromophore.

We report the synthesis and photochemical properties of a series of dicyanocoumarinylmethyl (DEAdcCM)- and dicyanocoumarinylethyl (DEAdcCE)-based photocages of carboxylic acids and amines with absorption maximum around 500 nm. Photolysis studies with green light have demonstrated that the structure of the coumarin chromophore as well as the nature of the leaving group and the type of bond to be photocleaved (ester or carbamate) have a strong influence on the rate and efficiency of the uncaging process. These experimental observations were also supported by DFT calculations. Such differences in deprotection kinetics have been exploited to sequentially photolyze two dicyanocoumarin-caged model compounds (e.g., benzoic acid and ethylamine), and open the way to increasing the number of functional levels that can be addressed with light in a single system, particularly when combining dicyanocoumarin caging groups with other photocleavable protecting groups, which remain intact under green light irradiation.

Development of Green/Red-Absorbing Chromophores Based on a Coumarin Scaffold That Are Useful as Caging Groups.

We report the design, synthesis, and spectroscopic characterization of a series of push-pull chromophores based on a novel coumarin scaffold in which the carbonyl of the lactone function of the original coumarin dyes has been replaced by the cyano(4-nitrophenyl)methylene moiety. The skeleton of the compounds was synthesized by condensation of a thiocoumarin precursor with the corresponding arylacetonitrile derivatives, and their photophysical properties were fine-tuned through the incorporation of electron-withdrawing groups (EWGs) like nitro and cyano at the phenyl ring, leading to absorption in the green to red region. Although fluorescence emission was weakened or even canceled upon introduction of two or three strong EWGs, the emission of the mononitro-containing coumarin derivatives in the red region upon excitation with green light is noticeable, as are their significantly large Stokes shifts. The new coumarin derivatives can be useful as photocleavable protecting groups, as demonstrated through the synthesis and characterization of a series of coumarin-based photocages of benzoic acid. Preliminary photolysis studies with green light have demonstrated that the structure of the coumarin chromophore influences the rate of the uncaging process, opening the way to exploiting these new coumarin scaffolds as caging groups that can be removed with visible light.

Structural implications on the excitation dynamics of fluorescent 3H-indolium cations.

Fluorescent 3H-indolium cations are valuable components for the realization of activatable fluorophores for bioimaging applications. Their relatively poor fluorescent quantum yields in organic solvents, however, appear to be in contradiction to their good performance in analytical methods based on single-molecule detection. The elucidation of the structural factors governing the excitation dynamics of these compounds is, therefore, essential to rationalize these effects and possibly guide the future design of activatable probes with improved performance. In this context, the structural, photochemical and photophysical properties of a model compound, consisting of coumarin and 3H-indolium heterocycles separated by a [C-C[double bond, length as m-dash]C-C] bridge, were characterized with a combination of experimental and theoretical analyses. These studies demonstrate that the fast rotation about the [C-C] bond adjacent to the coumarin component competes with the radiative deactivation of the excited state in nonviscous environments. This geometrical change dislodges the coumarin and 3H-indolium cations out of planarity to allow the population of a weakly-emissive twisted intramolecular charge-transfer (TICT) state and produce fluorescence with low quantum yield. In viscous environments, the conformational change is slow and cannot compete effectively with the radiative deactivation of the excited state, which instead produces fluorescence with high quantum yield. These results indicate that structural modifications aimed at the restriction of the rotation of this [C-C] bond are essential to improve considerably the fluorescence quantum yield of this chromophoric platform. Should a synthetic strategy for the implementation of these design guidelines be identified, activatable fluorophores, based on the 3H-indolium platform, with improved brightness will ultimately emerge.

Semiconductor Quantum Dots with Photoresponsive Ligands.

Photochromic or photocaged ligands can be anchored to the outer shell of semiconductor quantum dots in order to control the photophysical properties of these inorganic nanocrystals with optical stimulations. One of the two interconvertible states of the photoresponsive ligands can be designed to accept either an electron or energy from the excited quantum dots and quench their luminescence. Under these conditions, the reversible transformations of photochromic ligands or the irreversible cleavage of photocaged counterparts translates into the possibility to switch luminescence with external control. As an alternative to regulating the photophysics of a quantum dot via the photochemistry of its ligands, the photochemistry of the latter can be controlled by relying on the photophysics of the former. The transfer of excitation energy from a quantum dot to a photocaged ligand populates the excited state of the species adsorbed on the nanocrystal to induce a photochemical reaction. This mechanism, in conjunction with the large two-photon absorption cross section of quantum dots, can be exploited to release nitric oxide or to generate singlet oxygen under near-infrared irradiation. Thus, the combination of semiconductor quantum dots and photoresponsive ligands offers the opportunity to assemble nanostructured constructs with specific functions on the basis of electron or energy transfer processes. The photoswitchable luminescence and ability to photoinduce the release of reactive chemicals, associated with the resulting systems, can be particularly valuable in biomedical research and can, ultimately, lead to the realization of imaging probes for diagnostic applications as well as to therapeutic agents for the treatment of cancer.

Oxazines: A New Class of Second-Order Nonlinear Optical Switches.

A combined experimental-theoretical investigation has revealed that oxazine-based compounds are multiaddressable, multistate, and multifunctional molecular switches exhibiting contrasts of both linear and second-order nonlinear optical properties. The switching properties are particularly large when the substituent is a donor group. In this study, the cleavage of the C-O bond at the junction of the indole and oxazine cycles (of the closed a forms) is acido-triggered, leading to an open form (b(+)) characterized by larger first hyperpolarizabilities (ßHRS) and smaller excitation energies than in the closed form. These results are confirmed and interpreted utilizing ab initio calculations that have been carried out on a broad set of compounds to unravel the role of the substituent. With respect to acceptor groups, oxazines bearing donor groups are characterized not only by larger ßHRS and ßHRS contrast ratios but also by smaller excitation energies, larger opening-induced charge transfer, and reduction of the bond length alternation, as well as smaller Gibbs energies of the opening reaction. Compared to protonated open forms (b(+)), calculations on the zwitterionic open forms (b) have pointed out similarities in the long-wavelength UV/vis absorption spectra, whereas their ßHRS values might differ strongly as a function of the substituent. Indeed, the open forms present two NLOphores, the indoleninium-substituent entity and the nitrophenol (present in the protonated open form, b(+)) or nitrophenolate (present in the zwitterionic open form, b) moiety. Then, nitrophenolate displays a larger first hyperpolarizability than nitrophenol and the ß tensor of the two entities might reinforce or cancel each other.

Tuning the Activation Wavelength of Photochromic Oxazines.

The activation wavelength of a photochromic oxazine can be shifted bathochromically with the introduction of a methoxy substituent on the chromophore responsible for initiating the photochemical transformation. This structural modification permits switching under mild illumination conditions, enhances the photoisomerization quantum yield and ensures outstanding fatigue resistance. Thus, these results can guide the design of new members of this family of photoresponsive molecular switches with improved photochemical and photophysical properties.

Fastest non-ionic azo dyes and transfer of their thermal isomerisation kinetics into liquid-crystalline materials.

Push-pull bithienylpyrrole-based azo dyes exhibit thermal isomerisation rates as fast as 1.4 µs in acetonitrile at 298 K becoming, thus, the fastest neutral azo dyes reported so far. These remarkably low relaxation times can be transferred into liquid-crystalline matrices enabling light-triggered oscillations in the optical density of the final material up to 11 kHz under ambient conditions.

Exploring optical mechanotransduction in fluorescent liquid crystal elastomers.

Carbazole-based nematic liquid single crystal elastomers switch their fluorescence mechanically on demand enabling a fast optical mechanotransduction under ambient conditions. The identification of the key factors controlling such process is of utmost importance since it might lead to a significant improvement of the transducing abilities of these smart materials. In particular, variations in the length of the fluorophore flexible spacer translates in a distinct mutual interaction between both mesogenic and fluorogenic platforms, giving rise thereby to functional materials with a significantly different mechanofluorescent behaviour.

Self-Assembling Nanoparticles of Amphiphilic Polymers for In Vitro and In Vivo FRET Imaging.

Self-assembling nanoparticles of amphiphilic polymers are viable delivery vehicles for transporting hydrophobic molecules across hydrophilic media. Noncovalent contacts between the hydrophobic domains of their macromolecular components are responsible for their formation and for providing a nonpolar environment for the encapsulated guests. However, such interactions are reversible and, as a result, these supramolecular hosts can dissociate into their constituents amphiphiles to release the encapsulated cargo. Operating principles to probe the integrity of the nanocarriers and the dynamic exchange of their components are, therefore, essential to monitor the fate of these supramolecular assemblies in biological media. The co-encapsulation of complementary chromophores within their nonpolar interior offers the opportunity to assess their stability on the basis of energy transfer and fluorescence measurements. Indeed, the exchange of excitation energy between the entrapped chromophores can only occur if the nanoparticles retain their integrity to maintain donors and acceptors in close proximity. In fact, energy-transfer schemes are becoming invaluable protocols to elucidate the transport properties of these fascinating supramolecular constructs in a diversity of biological preparations and can facilitate the identification of strategies to deliver contrast agents and/or drugs to target locations in living organisms for potential diagnostic and/or therapeutic applications.

Correction: Selective photoregulation of the activity of glycogen synthase and glycogen phosphorylase, two key enzymes in glycogen metabolism.

Correction for 'Selective photoregulation of the activity of glycogen synthase and glycogen phosphorylase, two key enzymes in glycogen metabolism' by Mireia Díaz-Lobo, et al., Org. Biomol. Chem., 2015, 13, 7282-7288.

Spatially close azo dyes with sub-nanosecond switching speeds and exceptional temporal resolution.

Photoswitchable bis-azo dyes with an outstanding temporal resolution of 10(15) times between the thermal relaxation rates of their two constituting photochromes are reported. Remarkably, the close spatial proximity of both azo photochromes in these molecular assemblies translates in an unprecedented 10(3) -fold acceleration of the thermal isomerization rate of their faster azo unit compared to the one displayed by the isolated counterpart. Indeed, the relaxation time of the fast-isomerizing platform of the herein reported bis-azobenzenes is as low as 200 ps under ambient conditions. In the wake of these results, the bis-azo dyes described herein are invaluable chromophores for the design of multifunctional light-addressable materials in which simultaneous switching in two very different timescales might be essential.

Selective photoregulation of the activity of glycogen synthase and glycogen phosphorylase, two key enzymes in glycogen metabolism.

Glycogen is a polymer of α-1,4- and α-1,6-linked glucose units that provides a readily available source of energy in living organisms. Glycogen synthase (GS) and glycogen phosphorylase (GP) are the two enzymes that control, respectively, the synthesis and degradation of this polysaccharide and constitute adequate pharmacological targets to modulate cellular glycogen levels, by means of inhibition of their catalytic activity. Here we report on the synthesis and biological evaluation of a selective inhibitor that consists of an azobenzene moiety glycosidically linked to the anomeric carbon of a glucose molecule. In the ground state, the more stable (E)-isomer of the azobenzene glucoside had a slight inhibitory effect on rat muscle GP (RMGP, IC50 = 4.9 mM) and Escherichia coli GS (EcGS, IC50 = 1.6 mM). After irradiation and subsequent conversion to the (Z)-form, the inhibitory potency of the azobenzene glucoside did not significantly change for RMGP (IC50 = 2.4 mM), while its effect on EcGS increased 50-fold (IC50 = 32 µM). Sucrose synthase 4 from potatoes, a glycosyltransferase that does not operate on glycogen, was only slightly inhibited by the (E)-isomer (IC50 = 0.73 mM). These findings could be rationalized on the basis of kinetic and computer-aided docking analysis, which indicated that both isomers of the azobenzene glucoside mimic the EcGS acceptor substrate and exert their inhibitory effect by binding to the glycogen subsite in the active center of the enzyme. The ability to selectively photoregulate the catalytic activity of key enzymes of glycogen metabolism may represent a new approach for the treatment of glycogen metabolism disorders.