Suppression of SOCS3 expression in macrophage cells: Potential application in diabetic wound healing.

Impaired polarization of M1 to M2 macrophages has been reported in diabetic wounds. We aimed to improve this polarization by down-regulation of expression of the "Suppressor of Cytokine Signaling 3" (SOCS3) gene in macrophages. Two oligodeoxynucleotide (ASO) sequences were designed against SOC3 mRNA and were loaded to mannosylated-polyethyleneimine (Man-PEI). The optimum N/P ratio for Man-PEI-ASO was determined to be 8 based on loading efficiency, particle size, zeta potential, cellular uptake and cytotoxicity assay. pH stability of ASO in Man-PEI-ASO and its protection from DNase I was confirmed. After in vitro treatment of macrophages with Man-PEI-ASO, SOCS3 was downregulated, SOCS1 upregulated, and SOCS1/SOCS3 ratio increased. Also, expressions of macrophage markers of M2 (IL-10, Arg1, CD206) increased and those of M1 (IL-1ß, NOS2, CD68) decreased, and secretion of pro-inflammatory cytokines (TNF-α and IL-1ß) decreased while that of anti-inflammatory cytokine IL-4 increased. All suggested a polarization into M2 phenotype. Finally, the Man-PEI-ASO was loaded in hydrogel and applied to a diabetic wound model in mice. It improved the healing to the level observed in non-diabetic wounds. We show that using antisense sequences against SOC3 mRNA, macrophage polarization could be directed into the M2 phenotype and healing of diabetic wound could be highly improved.

Fabrication and characterization of a hydrocolloid wound dressing functionalized with human placental derived extracellular matrix for management of skin wounds: An animal study.

BACKGROUND: Functionalization of wound dressing is one of the main approaches for promoting wound healing in skin wound management. In this study, our aim is to fabricate a bio-functionalized hydrocolloid wound dressing. METHODS: The extracellular matrix (ECM) was extracted from human placental tissue. A hydrocolloid film was fabricated using Na-CMC, pectin, gelatin, styrene-isoprene-styrene adhesive, glycerol, and 0.5%-2.5% powdered ECM. A polyurethane film and a release liner were used in the hydrocolloid/ECM films. The mechanical, adhesion, swelling rate, and integrity of the films were investigated. Cell proliferation, adhesion, and migration assays, as well as, SEM and FTIR spectroscopy were also conducted. Macroscopic and microscopic evaluations of wound healing process and formation of blood vessels were conducted in mouse animal models. RESULTS: We successfully fabricated a three-layered ECM-functionalized hydrocolloid dressing with a water vapor transmission rate of 371 g/m2 /day and an adhesion peel strength of 176 KPa. Cellular adhesion, proliferation and migration were promoted by ECM. In the animal tests, ECM-functionalized hydrocolloids significantly improved wound closure and re-epithelialization at days 14 and 21. Also, ECM-functionalized hydrocolloids promoted the formation of hair follicles. CONCLUSIONS: Our findings suggest that ECM could enhance the wound healing properties of hydrocolloid wound dressings. This wound dressing could be considered for application in hard-to-heal acute wounds.

Macrophage cell morphology-imprinted substrates can modulate mesenchymal stem cell behaviors and macrophage M1/M2 polarization for wound healing applications.

Mesenchymal stem cells and macrophages (MQ) are two very important cells involved in the normal wound healing process. It is well understood that topological cues and mechanical factors can lead to different responses in stem cells and MQ by influencing their shape, cytoskeleton proliferation, migration, and differentiation, which play an essential role in the success or failure of biomaterial implantation and more importantly wound healing. On the other hand, the polarization of MQ from proinflammatory (M1) to prohealing (M2) phenotypes has a critical role in the acceleration of wound healing. In this study, the morphology of different MQ subtypes (M0, M1, and M2) was imprinted on a silicon surface (polydimethylsiloxane [PDMS]) to prepare a nano-topography cell-imprinted substrate with the ability to induce anti-inflammatory effects on the mouse adipose-derived stem cells (ADSCs) and RAW264.7 monocyte cell line (MO). The gene expression profiles and flow cytometry of MQ revealed that the cell shape microstructure promoted the MQ phenotypes according to the specific shape of each pattern. The ELISA results were in agreement with the gene expression profiles. The ADSCs on the patterned PDMS exhibited remarkably different shapes from no-patterned PDMS. The MOs grown on M2 morphological patterns showed a significant increase in expression and section of anti-inflammatory cytokine compared with M0 and M1 patterns. The ADSCs homing in niches heavily deformed the cytoskeletal, which is probably why the gene expression and phenotype unexpectedly changed. In conclusion, wound dressings with M2 cell morphology-induced surfaces are suggested as excellent anti-inflammatory and antiscarring dressings.

Combined Treatment of Dendrosomal-Curcumin and Daunorubicin Synergistically Inhibit Cell Proliferation, Migration and Induce Apoptosis in A549 Lung Cancer Cells.

Purpose: Chemotherapy drugs used to treat lung cancer are associated with drug resistance and severe side effects. There have been rising demands for new therapeutic candidates and novel approaches, including combination therapy. Here, we aimed to investigate the combinatorial effect of a dendrosomal formulation of curcumin (DNC) and daunorubicin (DNR) on the A549 lung cancer cell line. Methods: We performed cytotoxicity, apoptosis, cell migration, colony-formation capacity, and gene expression analysis to interpret the mechanism of action for a combination of DNC and DNR on A549 cells. Results: Our results revealed that the combination of DNC and DNR could synergistically inhibit the A549 cells' growth. This synergistic cytotoxicity was further approved by flow cytometry, migration assessment, colony-forming capacity and gene expression analysis. DNR combination with DNC resulted in increased apoptosis to necrosis ratio compared to DNR alone. In addition, the migration and colony-forming capacity were at the minimal range when DNC was combined with DNR. Combined treatment decreased the expression level of MDR-1, hTERT and Bcl-2 genes significantly. In addition, the ratio of Bax/Bcl2 gene expression significantly increased. Our analysis by free curcumin, dendrosomes and DNC also showed that dendrosomes do not have any significant cytotoxic effect on the A549 cells, suggesting that this carrier has a high potential for enhancing the curcumin's biological effects. Conclusion: Our observations suggest that the DNC formulation of curcumin synergistically enhances the antineoplastic effect of DNR on the A549 cell line through the modulation of apoptosis/necrosis ratio, as well as Bax/Bcl2 ratio, MDR-1 and hTERT gene expression.

Oxidized carboxymethyl cellulose/gelatin in situ gelling hydrogel for accelerated diabetic wound healing: Synthesis, characterization, and in vivo investigations.

Diabetic wounds are chronic wounds that are currently affecting many patient's quality of life. These wounds are challenging because of the impaired healing cycle and harsh environment. In this study in situ gelling hydrogels based on oxidized carboxymethyl cellulose (OCMC) and gelatin (Gel) were used to hasten the healing rate due to their ease of application. The suggested system in this work is synthesized from entirely natural renewable biomaterials to not only achieve the best biocompatibility and biodegradability but also to develop a sustainable product. The rheological studies showed that the hydrogel is turned into a gel after about 30 s of the mixing process. Moreover, the hydrogel can absorb about ten times its weight, keeping the wound hydrated. In vitro biological investigations indicated optimal biocompatibility, antibacterial, and antioxidant activity for faster tissue regeneration. This product was tested in vivo on normal rats and diabetic mice models to treat full-thickness incisional wounds. Results showed that the OCMC-Gel hydrogel is able to hasten the healing rate in both non-diabetic and diabetic wounds. Pathological examinations of the regenerated skin tissue revealed that the OCMC-Gel treated groups developed much more than the control group.

Fabrication and investigating in vivo wound healing property of coconut oil loaded nanofiber/hydrogel hybrid scaffold.

Obtaining a sustainable drug delivery system is a challenging issue in biomedical science. This became even more important in the wound regeneration process due to its long treatment process. In this study, the calcium alginate (CaAlg) hydrogel is coated on the surface of polycaprolactone (PCL)/gelatin (Gel) nanofibers containing coconut oil (CO) using the impregnation method. The physical, chemical, and morphological properties of produced samples are investigated using different characterization techniques to verify the influence of hydrogel. Water contact angle, swelling ratio, and water vapor permeability measurements are used to evaluate the effect of hydrogel on the hydrophilicity of the proposed system. The cell viability test showed that the nanocomposite hydrogel is biocompatible and could improve wound healing. According to drug release studies, hydrogel addition to the nanofiber system plays an essential role in controlling CO release rate in the first 250 h. In vivo studies also indicated faster skin regeneration.

Osteogenic Potential of Magnesium (Mg)-Doped Multicomponent Bioactive Glass: In Vitro and In Vivo Animal Studies.

The use of bioactive glasses (BGs) has been quite fruitful in hard tissue engineering due to the capability of these materials to bond to living bone. In this work, a melt-derived magnesium (Mg)-doped BG (composition: 45SiO2-3P2O5-26CaO-15Na2O-7MgO-4K2O (mol.%)) was synthesized for being used in bone reconstruction. The prepared BGs were then manufactured as three-dimensional (3D) scaffolds by using the sponge replica approach. The microstructure of the samples was assessed by X-ray diffraction (XRD) and the surface morphology was observed by using scanning electron microscopy (SEM). The in vitro bioactivity and the release of osteo-stimulatory Mg2+ ions from the prepared samples were investigated over 7 days of incubation in simulated body fluids (SBF). In vitro cellular analyses revealed the compatibility of the Mg-doped BGs with human osteosarcoma cells (MG-63 cell line). Moreover, the Mg-doped BGs could induce bone nodule formation in vitro and improve the migratory ability of human umbilical vein endothelial cells (HUVECs). In vivo osteogenic capacity was further evaluated by implanting the BG-derived scaffolds into surgically-created critical-size bone defects in rats. Histological and immunohistological observations revealed an appropriate bone regeneration in the animals receiving the glass-based scaffolds after 12 weeks of surgery. In conclusion, our study indicates the effectiveness of the Mg-doped BGs in stimulating osteogenesis in both in vitro and in vivo conditions.

Synthesis and Characterization of Exopolysaccharide Encapsulated PCL/Gelatin Skin Substitute for Full-Thickness Wound Regeneration.

Loss of skin integrity can lead to serious problems and even death. In this study, for the first time, the effect of exopolysaccharide (EPS) produced by cold-adapted yeast R. mucilaginosa sp. GUMS16 on a full-thickness wound in rats was evaluated. The GUMS16 strain's EPS was precipitated by adding cold ethanol and then lyophilized. Afterward, the EPS with polycaprolactone (PCL) and gelatin was fabricated into nanofibers with two single-needle and double-needle procedures. The rats' full-thickness wounds were treated with nanofibers and Hematoxylin and eosin (H&E) and Masson's Trichrome staining was done for studying the wound healing in rats. Obtained results from SEM, DLS, FTIR, and TGA showed that EPS has a carbohydrate chemical structure with an average diameter of 40 nm. Cell viability assessments showed that the 2% EPS loaded sample exhibits the highest cell activity. Moreover, in vivo implantation of nanofiber webs on the full-thickness wound on rat models displayed a faster healing rate when EPS was loaded into a nanofiber. These results suggest that the produced EPS can be used for skin tissue engineering applications.

Cellulose nanocrystal effect on crystallization kinetics and biological properties of electrospun polycaprolactone.

Mechanical properties of tissue engineering nanofibrous scaffolds are of importance because they not only determine their ease of application, but also influence the environment for cell growth and proliferation. Cellulose nanocrystals (CNCs) are natural renewable nanoparticles that have been widely used for manipulating nanofibers' mechanical properties. In this article, cellulose nanoparticles were incorporated into poly(caprolactone) (PCL) solution, and composite nanofibers were produced. Ozawa-Flynn-Wall (OFW) methodology and X-ray diffraction were used to investigate the effect of CNC incorporation on PCL crystalline structure and its biological properties. Results showed that CNC incorporation up to 1% increases the crystallization activation energy and reduces the crystal volume, while these factors remain constant above this critical concentration. MTT assay and microscopic images of seeded cells on the nanofiber scaffolds indicated increased cell growth on the samples containing CNC. This behavior could be attributed to their greater hydrophilicity, which was confirmed using parallel exponential kinetics (PEK) model fitting to results obtained from dynamic vapor sorption (DVS) studies. Superior performance of CNC containing samples was also confirmed by in vivo implantation on full-thickness wounds. The wound area faded away more rapidly in these samples. H&E and Masson's trichrome staining showed better regeneration and more developed tissues in wounds treated with PCL-CNC1% nanofibers.

Enhanced antimicrobial and full-thickness wound healing efficiency of hydrogels loaded with heparinized ZnO nanoparticles: In vitro and in vivo evaluation.

Nanotechnology-based fabricated wound dressings are known as appropriate substrates to enhance healing in both acute and chronic wounds. These types of materials have the ability to deliver therapeutic agents. In this study, a wound dressing including heparinized zinc oxide nanoparticles in combination with chitosan and poly(vinyl alcohol) was developed to investigate its antibacterial and regenerative properties in a rat model of full thickness skin wounds. By adding nanoparticles, the mechanical strength increased up to twice as compared to the sample without nanoparticles. In addition, heparin release profile follows the Hixson-Crowell release kinetic. Protein adsorption enhanced by adding nanoparticles in hydrogels and the prepared wound dressings were completely biocompatible. In terms of antibacterial activity, the minimum inhibitory concentration decreased by conjugation of heparin on the surface of zinc oxide nanoparticles compared to the non-functionalized nanoparticles, and, this shows the increased antibacterial synergistic effect by adding heparin to nanoparticles. Furthermore, it was found that the heparinized zinc oxide nanoparticles effectively accelerate wound closure, re-epithelialization and decrease collagen deposition compared to other groups after implantation. Hence, the prepared wound dressings have the capacity to significantly enhance healing of acute wounds.

Decellularization and preservation of human skin: A platform for tissue engineering and reconstructive surgery.

A matrix derived from natural tissue functions as a highly biocompatible and versatile scaffold for tissue engineering applications. It can act as a supportive construct that provides a niche for colonization by host cells. In this work, we describe a cost-effective, reliable and reproducible protocol for decellularization and preservation of human skin as a potential soft tissue replacement. The decellularized human skin is achieved using purely chemical agents without any enzymatic steps. The suitability of the proposed method for the preservation of the extracellular matrix (ECM) structure and its main components and integrity were evaluated using histological and immunohistochemical analysis. Cryopreservation and final sterility were conducted using programmable freeze-drying and gamma irradiation. The architecture, basement membrane and 3D structure of ECM can be successfully preserved after decellularization. Our protocol was found to be appropriate to maintain key proteins such as collagen type I, III, IV and laminin in the structure of final scaffold. This protocol offers a novel platform for the preparation of a dermal substitute for potential clinical applications. STATEMENT OF SIGNIFICANCE: Clinical application of naturally-based scaffolds for verity of health problems obliges development of a reproducible and effective technology that does not change structural and compositional material properties during scaffold preparation and preservation. Lack of an effective protocol for the production of biological products using decellularization method is still remaining. This effort is directing to solve this challenge in order to accomplish the off-the -shelf availability of decellularized dermal scaffold in market for clinical application.

Decellularized human amniotic membrane: From animal models to clinical trials.

The efficacy of decellularized products for healing of acute and chronic wounds mostly relies on physical and chemical properties, processing methods and host response. Human Amniotic Membrane (HAM) is considered as an effective and highly used wound dressing in clinic. According to the proposed decellularization protocols for developing of HAM, we have compared different protocols to introduce the most efficient methods, which can be used as a functional dermal matrix. In this study, different methods of HAM decellularization were used to achieve an optimal process. After achievement of appropriate decellularized method in vitro the amniotic membrane were examined in term of animal in vivo study and human clinical trial. The results of in vitro and in vivo assay indicate that the HAMs which were prepared with peracetic acid (2 M) had a significantly different in term of GAGs quantification, DNA isolation and quantification, histological assessment, collagen analysis, Cell-Tissue Interaction Study and cytotoxicity (P < 0/05). Tissue samples treated with peracetic acid (2 M) were more acceptable than that of samples prepared with other protocols in terms of preserving natural components and structure and removing of cell fragments. The peracetic acid-processed HAM was further functionally evaluated through in vivo assessments that can further lead to tissue reconstruction within the human host.