ABSTRACT
There was an error in Equation (1) in the original publication [...].
ABSTRACT
Bulk heterojunction polymer solar cells (PSCs) blended with non-fullerene-type acceptors (NFAs) possess good solar power conversion efficiency and compatibility with flexible electronics, rendering them good candidates for mobile photovoltaic applications. However, their internal absorption performance and mechanism are yet to be fully elucidated because of their complicated interference effect caused by their multilayer device structure. The transfer matrix method (TMM) is ideal for analyzing complex optical electric fields by considering multilayer interference effects. In this study, an active layer (AL) thickness-dependent TMM is used to obtain accurate information on the photon-capturing mechanisms of NFA-based PSCs for comparison with experimental results. Devices with AL thicknesses of 40-350 nm were prepared, and the AL-thickness-dependent device parameters with incident photon-to-current efficiency spectra were compared with the calculated internal absorption spectra of the TMM. The spectrally and spatially resolved spectra as a function of the AL thickness and excitation wavelength revealed that the power conversion efficiency of the NFA-blended PSC decreased with the increasing AL thickness after reaching a maximum of ~100 nm; by contrast, the internal absorption efficiency showed the opposite trend. Furthermore, the TMM spectra indicated that the spatial distribution of the photogenerated charge carriers became significantly imbalanced as the AL thickness increased, implying that the AL-dependent loss stemmed from the discrepancy between the absorption and the extracted charge carriers.
ABSTRACT
Efforts to improve the solar power conversion efficiencies of binary bulk heterojunction-type organic photovoltaic devices using an active layer consisting of a poly-(3-alkylthiophene) (P3AT) homopolymer and a suitable fullerene derivative face barriers caused by the intrinsic properties of homopolymers. To overcome such barriers, researchers might be able to chemically tailor homopolymers by means of monomer ratio-balanced block copolymerization to obtain preferable properties. Triblock copolymers consisting of three components-3-hexylthiophene (HT), 3-butylthiophene (BT), and 3-octylthiophene (OT)-were synthesized via Grignard metathesis (GRIM) polymerization. The component ratios of the synthesized block copolymers were virtually the same as the feeding ratios of the monomers, a fact which was verified using 1H-NMR spectra. All the copolymers exhibited comparable crystalline and melting temperatures, which increased when one type of monomer became dominant. In addition, their power conversion efficiencies and photoluminescence properties were governed by the major components of the copolymers. Interestingly, the HT component-dominated block copolymer indicated the highest power conversion efficiency, comparable to that of its homopolymer, although its molecular weight was significantly shorter.
Subject(s)
Solar Energy , Thiophenes , Thiophenes/chemistry , Polymers/chemistryABSTRACT
A series of poly-3-alkylthiophenes (P3ATs) with butyl (P3BT), hexyl (P3HT), and octyl (P3OT) side-chains and well-defined molecular weights (MWs) were synthesized using Grignard metathesis polymerization. The MWs of P3HTs and P3OTs obtained via gel permeation chromatography agreed well with the calculated MWs ranging from approximately 10 to 70 kDa. Differential scanning calorimetry results showed that the crystalline melting temperature increased with increasing MWs and decreasing alkyl side-chain length, whereas the crystallinity of the P3ATs increased with the growth of MWs. An MW-dependent red shift was observed in the UV-Vis and photoluminiscence spectra of the P3ATs in solution, which might be a strong evidence for the extended effective conjugation occurring in polymers with longer chain lengths. The photoluminescence quantum yields of pristine films in all polymers were lower than those of the diluted solutions, whereas they were higher than those of the phenyl-C61-butyric acid methyl ester-blended films. The UV-Vis spectra of the films showed fine structures with pronounced red shifts, and the interchain interaction-induced features were weakly dependent on the MW but significantly dependent on the alkyl side-chain length. The photovoltaic device performances of the P3BT and P3HT samples significantly improved upon blending with a fullerene derivative and subsequent annealing, whereas those of P3OTs mostly degraded, particularly after annealing. The optimal power conversion efficiencies of P3BT, P3HT, and P3OT were 2.4%, 3.6%, and 1.5%, respectively, after annealing with MWs of ~11, ~39, and ~38 kDa, respectively.
ABSTRACT
Non-fullerene type acceptors (NFA) have gained attention owing to their spectral extension that enables efficient solar energy capturing. For instance, the solely NFA-mediated absorbing region contributes to the photovoltaic power conversion efficiency (PCE) as high as ~30%, in the case of the solar cells comprised of fluorinated materials, PBDB-T-2F and ITIC-4F. This implies that NFAs must be able to serve as electron donors, even though they are conventionally assigned as electron acceptors. Therefore, the pathways of NFA-originated excitons need to be explored by the spectrally resolved photovoltaic characters. Additionally, excitation wavelength dependent transient absorption spectroscopy (TAS) was performed to trace the nature of the NFA-originated excitons and polymeric donor-originated excitons separately. Unique origin-dependent decay behaviors of the blend system were found by successive comparing of those solutions and pristine films which showed a dramatic change upon film formation. With the obtained experimental results, including TAS, a possible model describing origin-dependent decay pathways was suggested in the framework of reaction kinetics. Finally, numerical simulations based on the suggested model were performed to verify the feasibility, achieving reasonable correlation with experimental observables. The results should provide deeper insights in to renewable energy strategies by using novel material classes that are compatible with flexible electronics.
ABSTRACT
To achieve intrinsically light-weight flexible photovoltaic devices, a bulk-heterojunction-type active layer with a narrow-bandgap polymer is still considered as one of the most important candidates. Therefore, detailed information about the charge transfer efficiency from a photo-excited species on an electron-donating polymer to an electron acceptor is an important factor, given that it is among the most fundamental quantitative measures to understand the solar power conversion efficiency, in particular at the initial stage followed by primary exciton formation. To obtain accurate information in this regard, wide-range acceptor concentration-dependent transient absorption spectroscopy with femtosecond laser pulse excitation was performed using a representative narrow-bandgap polymer, commonly known as PTB7. The investigated acceptor concentration range covered was from 0.01 wt% up to 10 wt%, in addition to a 0 wt% pristine polymer sample and a sample with a conventional acceptor concentration of 60 wt%, which is important for high efficiency. From the kinetic data, an almost two orders of magnitude faster acceptor-induced charge transfer rate constant in addition to the native primary exciton lifetime of about 100 picoseconds could be extracted. These data were used to verify the suggested kinetic model and compare with device properties that show no meaningful loss during the extraction of photo-generated charge carriers.
ABSTRACT
Correction for 'Dye adsorption mechanisms in TiO2 films, and their effects on the photodynamic and photovoltaic properties in dye-sensitized solar cells' by Kyung-Jun Hwang et al., Phys. Chem. Chem. Phys., 2015, 17, 21974-21981.
